SIST EN 3545-008:2009
(Main)Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard
This standard specifies the characteristics of tools for assembly/removal of coding and attachment systems in family of rectangular electrical connector with sealed and non-sealed version rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C for aerospace application.
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 C bis 175 C - Teil 008: Ein-und Ausbauwerkzeuge für Befestigungs- und Kodierungssystem - Produktnorm
Diese Norm legt die Eigenschaften von Ein- und Ausbauwerkzeugen für Kodierungs- und Befestigungs¬systeme in der Familie der elektrischen Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastik¬gehäuse, Verriegelungssystem, bei Betriebstemperaturen von –55 °C bis 175 °C für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 C à 175 C - Partie 008 : Outils d'assemblage/démontage du système de codage et de fixation - Norme de produit
Aeronavtika - Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastično ohišje, zaporni mehanizem, delovna temperatura med –55 °C in 175 °C - 008. del: Orodja za nameščanje in odstranjevanje pritrditvenih in kodirnih sistemov - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 19-Apr-2009
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Apr-2009
- Due Date
- 11-Jun-2009
- Completion Date
- 20-Apr-2009
Overview
EN 3545-008:2006 is a CEN product standard in the Aerospace series that defines the characteristics of tools for assembly and removal of coding and attachment systems used with a family of rectangular electrical connectors. These connectors have sealed and non‑sealed rear versions, plastic housings and locking devices designed for aerospace applications with an operating temperature range of –55 °C to 175 °C. The standard specifies functional descriptions, tool types and marking/identification rules relevant to manufacture, installation and maintenance.
Key topics
- Scope and applicability
- Tools used with EN 3545 family rectangular connectors (coding and attachment systems).
- Applies to aerospace electrical connectors rated for –55 °C to 175 °C.
- Tool types and models
- Type A - removal tools for both EN 3545‑005 (female) and EN 3545‑006 (male) systems:
- Model 01: spring piston design (depression of piston for removal).
- Model 02: spring body design (depression of tool body; sides marked “M” or “F”).
- Type B - torquing tool for male coding/attachment system (EN 3545‑006) used for fitting, removal and torque tightening:
- Model 01: manual torquing tool.
- Model 02: attachment for powered or torque tools.
- Type A - removal tools for both EN 3545‑005 (female) and EN 3545‑006 (male) systems:
- Marking and designation
- Example designation format: EN3545-008A01 (standard number + tool type + model).
- Marking requirements follow EN 2424 (category P).
- Normative references
- Links to related product and test standards such as EN 2591‑100, EN 3545‑005 and EN 3545‑006.
Applications
- Aerospace OEM production - specified tools for correct assembly and removal of connector coding/attachment elements to ensure consistent fit and functional integrity.
- Maintenance & repair - ground support and maintenance teams use the defined tool types for safe removal, replacement and torqueing during servicing and inspections.
- Tooling manufacturers & suppliers - design and label tools to comply with the standard’s characteristics, designation and marking rules.
- Qualification and test labs - reference for verifying tooling compatibility with connector families and for conformance checks during component acceptance.
Who should use this standard
- Aerospace connector manufacturers and assemblers
- Aircraft systems integrators and maintenance organizations
- Toolmakers and tooling engineers supplying aerospace connectors
- Quality, inspection and certification personnel in aerospace supply chains
Related standards
- EN 3545‑005 - Female coding and attachment system (plug)
- EN 3545‑006 - Male coding and attachment system (receptacle)
- EN 2591‑100 - Elements of electrical and optical connection - Test methods (general)
- EN 2424 - Marking of aerospace products
This standard is essential when procuring or specifying tools for the EN 3545 connector family to ensure safety, interchangeability and compliance across aerospace platforms.
Frequently Asked Questions
SIST EN 3545-008:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard". This standard covers: This standard specifies the characteristics of tools for assembly/removal of coding and attachment systems in family of rectangular electrical connector with sealed and non-sealed version rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C for aerospace application.
This standard specifies the characteristics of tools for assembly/removal of coding and attachment systems in family of rectangular electrical connector with sealed and non-sealed version rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C for aerospace application.
SIST EN 3545-008:2009 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3545-008:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55
C bis 175
C - Teil 008: Ein-und Ausbauwerkzeuge für Befestigungs- und Kodierungssystem - ProduktnormSérie aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55
C à 175
C - Partie 008 : Outils d'assemblage/démontage du système de codage et de fixation - Norme de produitAerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55
C to 175
C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3545-008:2006SIST EN 3545-008:2009en,de01-junij-2009SIST EN 3545-008:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3545-008
August 2006 ICS 49.060 English Version
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 008 : Outils d'assemblage/démontage du système de codage et de fixation - Norme de produit
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von -55 °C bis 175 °C - Teil 008: Ein-und Ausbauwerkzeuge für Befestigungs- und Kodierungssystem - Produktnorm This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3545-008:2006: ESIST EN 3545-008:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...