SIST EN ISO 11668:2002

SLOVENSKI STANDARD
01-september-2002
1DGRPHãþD
SIST ISO 11668:1998
Veziva za barve in lake - Klorirane polimerne smole - Splošne metode preskušanja
(ISO 11668:1997)
Binders for paints and varnishes - Chlorinated polymerization resins - General methods
of test (ISO 11668:1997)
Bindemittel für Beschichtungsstoffe - Chlorhaltige Polymerisationsharze - Allgemeine
Prüfverfahren (ISO 11668:1997)
Liants pour peintures et vernis - Résines polymérisées chlorées - Méthodes générales
d'essai (ISO 11668:1997)
Ta slovenski standard je istoveten z: EN ISO 11668:2001
ICS:
87.060.20 Veziva Binders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11668
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 87.060.20
English version
Binders for paints and varnishes - Chlorinated polymerization
resins - General methods of test (ISO 11668:1997)
Liants pour peintures et vernis - Résines polymérisées Bindemittel für Beschichtungsstoffe - Chlorhaltige
chlorées - Méthodes générales d'essai (ISO 11668:1997) Polymerisationsharze - Allgemeine Prüfverfahren (ISO
11668:1997)
This European Standard was approved by CEN on 11 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11668:2001 E
worldwide for CEN national Members.

CORRECTED 2001-09-19
Foreword
The text of the International Standard from Technical Committee ISO/TC 35 "Paints and
varnishes" of the International Organization for Standardization (ISO) has been taken over as an
European Standard by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2002, and conflicting national
standards shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 11668:1997 has been approved by CEN as a
European Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 1158 1998 Plastics — Vinyl chloride EN ISO 1158 1998
homopolymers and copolymers —
Determination of chlorine content
ISO 3219 1993 Plastics — Polymers/resins in the EN ISO 3219 1994
liquid state or as emulsions or
dispersions — Determination of
viscosity using a rotational viscometer
with defined shear rate
INTERNATIONAL ISO
STANDARD 11668
First edition
1997-11-15
Binders for paints and varnishes —
Chlorinated polymerization resins —
General methods of test
Liants pour peintures et vernis — Résines polymérisées chlorées —
Méthodes générales d'essai
A
Reference number
ISO 11668:1997(E)
ISO 11668:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11668 was prepared by Technical Committee
ISO/TC 35, Paints and varnishes, subcommittee SC 10, Test methods for
binders for paints and varnishes.
Annex A forms an integral part of this International Standard.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
©
INTERNATIONAL STANDARD  ISO ISO 11668:1997(E)
Binders for paints and varnishes – Chlorinated
polymerization resins – General methods of test
1 Scope
This International Standard describes general methods of test for
a) chlorinated rubber and
b) vinyl chloride copolymers
for use in paints, varnishes and similar products.
The test methods to be applied in each individual case shall be the subject of agreement between the
interested parties.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions
of this International Standard. At the time of publication, the editions indicated were valid. All
standards are subject to revision, and parties to agreements based on this International Standard are
encouraged to investigate the possibility of applying the most recent editions of the standards
indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
...