iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61760-1:2001

(Main)

Surface mounting technology -- Part 1: Standard method for the specification of surface mounting components (SMDs)

Surface mounting technology -- Part 1: Standard method for the specification of surface mounting components (SMDs)

Applies to all electronic components covered by the IEC system which require an assessment with respect to their application to surface mounting. Gives a reference set of process conditions and related test conditions to be used when complying component specifications.

Oberflächenmontagetechnik -- Teil 1: Genormtes Verfahren zur Spezifizierung oberflächenmontierbarer Bauelemente (SMD)

Technique du montage en surface -- Partie 1: Méthode de normalisation pour la spécification des composants montés en surface (CMS)

S'applique à tous les composants électroniques couverts par le système CEI qui nécessitent d'être évalués lorsqu'il s'agit de les monter en surface. Fournit un ensemble de références indiquant les conditions de processus ainsi que les conditions d'essai correspondantes qui doivent être utilisées lors de l'élaboration de spécifications de composants.

Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)

General Information

Status
Withdrawn
Publication Date
28-Feb-2001
Withdrawal Date
16-Dec-2009
ICS
31.020 - Electronic components in general
Technical Committee
ITIV - Electronics assembly technology and Environmental standardization
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Nov-2009
Due Date
16-Dec-2009
Completion Date
17-Dec-2009
Ref Project
EN 61760-1:1998 - Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)

Relations

Replaced By
SIST EN 61760-1:2006 - Surface mounting technology -- Part 1: Standard method for the specification of surface mounting components (SMDs)
Effective Date
06-May-2014
Replaced By
SIST EN 61760-1:2006 - Surface mounting technology -- Part 1: Standard method for the specification of surface mounting components (SMDs)
Effective Date
28-Jan-2023

Buy Standard

EN 61760-1:2001EN 61760-1:2001
PreviousNext
Standard
EN 61760-1:2001
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61760-1:2001
01-marec-2001
Surface mounting technology - Part 1: Standard method for the specification of
surface mounting components (SMDs)
Surface mounting technology -- Part 1: Standard method for the specification of surface
mounting components (SMDs)
Oberflächenmontagetechnik -- Teil 1: Genormtes Verfahren zur Spezifizierung
oberflächenmontierbarer Bauelemente (SMD)
Technique du montage en surface -- Partie 1: Méthode de normalisation pour la
spécification des composants montés en surface (CMS)
Ta slovenski standard je istoveten z: EN 61760-1:1998
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN 61760-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 2 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 3 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 4 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 5 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 6 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 7 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 8 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 9 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 10 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 11 ----------------------

SIST EN 61760-1:2001

---------------------- Page: 12 --------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50419:2022(Main)
Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE)
EN 50419:2022

This document specifies a marking
— of electrical and electronic equipment (EEE) with a view to minimizing the disposal of waste EEE (WEEE)
as unsorted waste and to facilitating its separate collection.
NOTE 1 This is in accordance with Article 14(4) of Directive 2012/19/EU (WEEE, recast)
— that serves to clearly identify the producer of the equipment and
— that the equipment has been put on the market after 13 August 2005.
NOTE 2 This is in accordance with Articles 12(3) and 15(2) of Directive 2012/19/EU (WEEE, recast)
— that applies to categories of electrical and electronic equipment subject to WEEE collection, treatment,
recovery and environmentally sound disposal as defined by European and national regulations, provided
the equipment concerned is not part of another type of equipment that does not fall within the scope of
above mentioned regulations.
NOTE 3 This is in accordance with Article 2 and Annexes I – IV of Directive 2012/19/EU (WEEE, recast) [1]
The definition of a technical carrier medium for machine based identifying the producer, such as a barcode,
electronic data medium or microchip, is not covered by this document.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62321-2:2022(Main)
Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjunction and mechanical sample preparation
EN IEC 62321-2:2021

This part of IEC 62321 provides strategies of sampling along with the mechanical preparation
of samples from electrotechnical products. These samples can be used for analytical testing to
determine the levels of certain substances as described in the test methods in other parts of
the IEC 62321 series. Restrictions for substances will vary between geographic regions and
can be updated on a regular basis. This document describes a generic process for obtaining
and preparing samples prior to the determination of any substance of concern.
This document does not provide:
– full guidance on each and every product that could be classified as electrotechnical product.
Since there is a huge variety of electrotechnical parts, with various structures and
compositions, along with the continuous innovations in the industry, it is unrealistic to
attempt to provide procedures for the disjointment of every type of part;
– guidance regarding other routes to gather additional information on certain substances in a
product, although the information collected has relevance to the sampling strategies in this
document;
– safe disassembly and mechanical disjointment instructions related to electrotechnical
products (e.g. mercury-containing switches) and the recycling industry (e.g. how to handle
CRTs or the safe removal of batteries). See IEC 62554 [1] 1 for the disjointment and
mechanical sample preparation of mercury-containing fluorescent lamps;
– sampling procedures for packaging and packaging materials;
– analytical procedures to measure the levels of certain substances. This is covered by other
standards (e.g. other parts of the IEC 62321 series), which are referred to as "test
standards" in this document;
– guidelines for assessment of compliance.
This document has the status of a horizontal standard in accordance with IEC Guide 108 [2].

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62321-3-3:2021(Main)
Determination of certain substances in electrotechnical products Part 3-3: Screening of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by pyrolysis (Py-GC-MS) or thermal desorption (TD-GC-MS) gas chromatography-mass spectrometry
EN IEC 62321-3-3:2021

This part of IEC 62321 specifies the screening analysis of polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP), and di-isodecyl phthalate (DIDP) in polymers of electrotechnical products using the analytical technique of gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD-GC-MS). This test method has been evaluated through the analysis of PP (polypropylene), PS (polystyrene), and PVC (polyvinyl chloride) materials containing deca-BDE between 100 mg/kg and 1 000 mg/kg and individual phthalates between 100 mg/kg to 4 000 mg/kg as depicted in Annex J. Use of the methods described in this document for other polymer types, PBBs (mono-deca), PBDEs (mono-deca) and phthalates or concentration ranges other than those specified above has not been specifically evaluated. This document has the status of a horizontal standard in accordance with IEC Guide 108 [1]1.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62321-9:2021(Main)
Determination of certain substances in electrotechnical products - Part 9: Hexabromocyclododecane in polymers by chromatography-mass spectrometry (GC-MS)
EN IEC 62321-9:2021

This part of IEC 62321 specifies two techniques for the determination of
hexabromocyclododecane (HBCDD) in polymers of electrotechnical products.
The gas chromatography-mass spectrometry (GC-MS) test method is described in the
normative part of this document. The GC-MS method is suitable for the determination of
hexabromocyclododecane (HBCDD).
A method using high-pressure liquid chromatography-mass spectrometry (HPLC-MS) is given
in informative Annex A.
These test methods have been evaluated for use with EPS (expanded polystyrene foam),
XPS (extruded polystyrene foam) and ABS (acrylonitrile butadiene styrene) within the
concentration ranges as specified in Table 1. The use of this method for other types of materials
or concentration ranges outside those specified below has not been evaluated.
This document has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61760-2:2021(Main)
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
EN IEC 61760-2:2021

This International Standard describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble-free processing of surface mounting devices, both active and passive. (Conditions for printed boards are not taken into consideration.)
The object of this standard is to ensure that users of SMDs receive and store products tha can be further processed (e.g. positioned, soldered) without prejudice to quality and reliability. Improper transportation and storage of SMDs may cause deterioration and result in assembly problems such as poor solderability, delamination and "popcorning".

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62430:2021(Main)
Environmentally Conscious Design (ECD) - Principles, requirements and guidance
EN IEC 62430:2019

IEC 62430:2019 describes principles, specifies requirements and provides guidance for organizations intending to integrate environmental aspects into the design and development in order to minimize the adverse environmental impacts of their products.
This document applies to processes on how ECD (environmentally conscious design) are integrated into the design and development. This document applies to any organization, regardless of its size, type or sector.
This document does not provide requirements for assessing the conformity of individual products.
This horizontal standard is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard will not apply unless specifically referred to or included in the relevant publications.
IEC 62430:2019 cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Scope is extended from electrotechnical product and systems to all products including services.
b) As a consequence of the scope expansion, non-electrotechnical products, services in particular, are taken into account to modify requirements.
c) Clause 6 is added as a guidance.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62474:2019/A1:2021(Amendment)
Material declaration for products of and for the electrotechnical industry
EN IEC 62474:2019/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50693:2020(Main)
Product category rules for life cycle assessments of electronic and electrical products and systems
EN 50693:2019

This document defines product category rules (PCR) for electronic and electrical products and systems (EEPS).
It specifies the process and requirements on how to conduct life cycle assessment in the context of
environmental declarations.
PCR is complemented by additional product-specific rules (PSR), which further define e.g. functional units and
default scenarios in the product-specific context. Therefore, it also provides guidance on how to develop PSR
in corresponding technical committees.
This document provides common rules for:
a) life cycle assessment (LCA), including the requirements for developing default scenarios;
b) the LCA report;
c) the development of product specific rules.
This document provides further guidelines for environmental declarations.
The basic LCA principles and framework are based on the EN ISO 14040 series of standards (i.e EN ISO 14040
and ISO 14044), and therefore out of scope of the standard.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50614:2020(Main)
Requirements for the preparing for re-use of waste electrical and electronic equipment
EN 50614:2020

This European Standard is applicable to the processes relating to the preparing for re-use of WEEE.
NOTE 1   This European Standard covers the preparing for re-use of WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU.
This European Standard is applicable to preparing for re-use operators only and does not cover activities connected with used or second-hand equipment that have not become waste. It applies to all preparing for re-use operators, no matter their size or main focus of activity.
This European Standard assists in quantifying re-use, recycling and recovery rates in conjunction with EN 50625-1.
In case of treatment operations (including the collection and logistics of WEEE) other than preparing for re-use the EN 50625 series applies.
Preparing for re-use processes can include the removal of whole components or parts where they are intended to either be used in the repair of faulty equipment or sold as re-use parts.
The following EEE are not in the scope of this standard:
-    industrial monitoring and control instruments;
-    in vitro diagnostic medical devices, medical devices or active implantable devices.
NOTE 2   Examples of industrial monitoring and control instruments include equipment intended for use in potentially explosive atmospheres, and monitoring and control equipment that performs a safety function as part of industrial control system.
NOTE 3   In vitro diagnostic medical devices, medical devices and active implantable devices have the capacity to collect and harbour pathogens, depending on the environment in which they operated. It is essential to follow clinically proven means for decontamination. Relevant Directives are 93/42/EEC and 98/79/EC.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    37 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62474:2019(Main)
Material declaration for products of and for the electrotechnical industry
EN IEC 62474:2019

This document specifies the procedure, content, and form relating to material declarations for
products and accessories of organizations operating in and supplying to the electrotechnical
industry. Process chemicals, emissions during product use and product packaging material
are not in the scope of this document.
The main intended use of this document is to provide data up and down the supply chain that:
• allows organizations to assess products against substance compliance requirements,
• allows organizations to use this information in their environmentally conscious design
process and across all product life cycle phases.
This document specifies mandatory declaration requirements and also provides optional
declaration requirements.
This document does not suggest any specific method or process to capture material
declaration data in the supply chain. However, it provides a data format used to transfer
information within the supply chain. Organizations have the flexibility to determine the most
appropriate method to capture material declaration data without compromising data utility and
quality. This document is intended to allow reporting based on engineering judgement,
supplier material declarations, and/or sampling and testing.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day