TP176 - Uredba o odpadni električni in elektronski opremi

This document specifies a marking
—   of electrical and electronic equipment (EEE) with a view to minimizing the disposal of waste EEE (WEEE) as unsorted waste and to facilitating its separate collection.
NOTE 1   This is in accordance with Article 14(4) of Directive 2012/19/EU (WEEE, recast)
—   that serves to clearly identify the producer of the equipment and
—   that the equipment has been put on the market after 13 August 2005.
NOTE 2   This is in accordance with Articles 12(3) and 15(2) of Directive 2012/19/EU (WEEE, recast)
—   that applies to categories of electrical and electronic equipment subject to WEEE collection, treatment, recovery and environmentally sound disposal as defined by European and national regulations, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of above mentioned regulations.
NOTE 3   This is in accordance with Article 2 and Annexes I – IV of Directive 2012/19/EU (WEEE, recast) [1]
The definition of a technical carrier medium for machine based identifying the producer, such as a barcode, electronic data medium or microchip, is not covered by this document.

This European Standard is applicable to the treatment of waste temperature exchange equipment and other WEEE containing VFC or VHC in refrigerants or blowing agents.
This European Standard applies to the treatment of temperature exchange equipment until end-of-waste status is fulfilled, or temperature exchange equipment fractions are recycled, recovered, or disposed of.
This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of temperature exchange equipment.

This clause of Part 1 is replaced by the following:
This European standard is applicable to the treatments of WEEE containing CRTs and flat panel displays.
This European standard applies to the treatment of WEEE containing CRTs and flat panel displays until end-of-waste status is fulfilled, or fractions are recycled, recovered, or disposed of.
This European standard addresses all operators involved in the treatment including related handling, sorting, and storage.

This clause of Part 1 is replaced by the following:
This European standard is applicable to the treatment of lamps.
This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of.
This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment operations use mobile equipment.

EN 50574:2012 gives the responsible take-back parties the task of defining target values. This Technical Specification provides applicable target values, characteristic numbers; sampling and analysis procedures, as well as monitoring and reporting requirements. Furthermore, this Technical Specification provides validation methodologies for tests and the daily business of the treatment plants as defined in EN 50574:2012.

This European Standard is applicable to the treatment of waste electrical and electronic equipment (WEEE). This standard will be supplemented, for example by standards covering specific equipment. NOTE   This European Standard is intended to cover WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This standard applies to the treatment of WEEE until end-of-waste status is fulfilled, or until the WEEE is prepared for re-use, recycled, recovered, or disposed of. This standard addresses all operators involved in the treatment including related handling, sorting, and storage of WEEE.