SIST EN ISO 14456:2017/A1:2019

SLOVENSKI STANDARD
01-september-2019
Plinske jeklenke - Lastnosti plina in pripadajoči razvrstitveni razredi (FTSC) -
Dopolnilo A1 (ISO 14456:2015/Amd 1:2019)
Gas cylinders - Gas properties and associated classification (FTSC) codes - Amendment
1 (ISO 14456:2015/Amd 1:2019)
Gasflaschen - Eigenschaften von Gasen und zugehörige Klassifizierungscodes (FTSC) -
Änderung 1 (ISO 14456:2015/Amd 1:2019)
Bouteilles à gaz - Propriétés des gaz et codes de classification associés (FTSC) -
Amendement 1 (ISO 14456:2015/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 14456:2016/A1:2019
ICS:
23.020.35 Plinske jeklenke Gas cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 14456:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Gas properties and associated classification
(FTSC) codes - Amendment 1 (ISO 14456:2015/Amd
1:2019)
Bouteilles à gaz - Propriétés des gaz et codes de Gasflaschen - Eigenschaften von Gasen und zugehörige
classification associés (FTSC) - Amendement 1 (ISO Klassifizierungscodes (FTSC) - Änderung 1 (ISO
14456:2015/Amd 1:2019) 14456:2015/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 14456:2016; it was approved by CEN on 2 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14456:2016/A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 14456:2016/A1:2019) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw
...