iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 11611:2022

(Main)

Protective clothing for use in welding and allied processes (ISO/DIS 11611:2022)

Protective clothing for use in welding and allied processes (ISO/DIS 11611:2022)

Schutzkleidung für Schweißen und verwandte Verfahren (ISO/DIS 11611:2022)

Dieses Dokument legt Mindestanforderungen an und Prüfverfahren für die Sicherheit für Schutzkleidung fest, darunter Hauben, Schürzen, Überziehärmel und Gamaschen, die dafür vorgesehen sind, den Körper des Trägers, einschließlich Kopf (Hauben) und Füßen (Gamaschen) beim Schweißen und verwandten Verfahren mit vergleichbaren Risiken zu schützen. Für den Schutz des Kopfes und der Füße des Trägers ist dieses Dokument nur auf Hauben und Gamaschen anwendbar. Dieses Dokument legt keine Anforderungen an Schutzvorrichtungen für Füße, Hände, Gesicht und/oder Augen fest.
Diese Art von Schutzkleidung soll den Träger vor folgenden Gefährdungen schützen:
   Spritzer (kleine Spritzer geschmolzenen Metalls) in 2 Risikostufen, kurzzeitigen Kontakt mit Flammen, Strahlungswärme eines elektrischen Lichtbogens, der beim Schweißen und verwandten Verfahren zur Anwendung kommt;
   gefährliche künstliche optische Strahlung (UV-A, UV-B und insbesondere UV-C), die beim Schweißen und verwandten Verfahren entsteht, in 3 Risikostufen;
   sie beschränkt die Möglichkeit eines elektrischen Schlages durch kurzzeitigen, unbeabsichtigten Kontakt mit spannungsführenden elektrischen Leitern mit Gleichspannung bis zu etwa 100 V unter üblichen Schweißbedingungen auf ein Mindestmaß. Schweiß, Verschmutzungen oder andere Verunreinigungen können den Schutzgrad gegen kurzzeitigen unbeabsichtigten Kontakt mit spannungsführenden elektrischen Leitern bei diesen Spannungen beeinträchtigen.
Die wichtigsten Handschweißverfahren werden erläutert und den Höchstwerten der effektiv emittierten Bestrahlungsstärke entsprechend Verfahrensgruppen zugeordnet, die für diese Arten von Schweißverfahren durch Messung [15] bestimmt und bewertet wurden.
Für angemessenen umfassenden Schutz gegen Risiken, denen Schweißer üblicherweise ausgesetzt sind, sollte zusätzlich persönliche Schutzausrüstung (PSA) zum Schutz von Kopf, Gesicht, Händen und Füßen getragen werden, die mit anderen Normen erfasst wird.
Dieses Dokument ist nicht anwendbar auf Laserstrahlschweißverfahren (kohärente, monochromatische Strahlenquellen).
Eine Anleitung für die Auswahl der Schutzkleidung für unterschiedliche Schweißaktivitäten ist in Anhang B enthalten.

Vêtements de protection utilisés pendant le soudage et les techniques connexes (ISO/DIS 11611:2022)

Varovalna obleka pri varjenju in sorodnih postopkih (ISO/DIS 11611:2022)

General Information

Status
Not Published
Public Enquiry End Date
10-Nov-2022
ICS
13.340.10 - Protective clothing
25.160.01 - Welding, brazing and soldering in general
Technical Committee
OVP - Personal protecting equipment
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
06-Mar-2024
Due Date
24-Apr-2024
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
Ref Project
FprEN ISO 11611 - Protective clothing for use in welding and allied processes (ISO/FDIS 11611:2024)

Relations

Revised
SIST EN ISO 11611:2015 - Protective clothing for use in welding and allied processes (ISO 11611:2015)
Effective Date
19-Jan-2023
Revised
SIST EN ISO 11611:2015 - Protective clothing for use in welding and allied processes (ISO 11611:2015)
Effective Date
18-Jan-2023
Revised
SIST EN ISO 11611:2015 - Protective clothing for use in welding and allied processes (ISO 11611:2015)
Effective Date
04-Oct-2017

Buy Standard

prEN ISO 11611:2022prEN ISO 11611:2022
PreviousNext
Draft
prEN ISO 11611:2022
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 11611:2022
01-november-2022
Varovalna obleka pri varjenju in sorodnih postopkih (ISO/DIS 11611:2022)
Protective clothing for use in welding and allied processes (ISO/DIS 11611:2022)
Schutzkleidung für Schweißen und verwandte Verfahren (ISO/DIS 11611:2022)
Vêtements de protection utilisés pendant le soudage et les techniques connexes
(ISO/DIS 11611:2022)
Ta slovenski standard je istoveten z: prEN ISO 11611
ICS:
13.340.10 Varovalna obleka Protective clothing
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
oSIST prEN ISO 11611:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11611:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11611:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11611
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:
2022-08-23 2022-11-15
Protective clothing for use in welding and allied processes
Vêtements de protection utilisés pendant le soudage et les techniques connexes
ICS: 13.340.10; 25.160.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11611:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11611:2022
ISO/DIS 11611:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11611
ISO/TC 94/SC 13 Secretariat: SNV
Voting begins on: Voting terminates on:

Protective clothing for use in welding and allied processes
Vêtements de protection utilisés pendant le soudage et les techniques connexes
ICS: 13.340.10; 25.160.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 11611:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11611:2022
ISO/DIS 11611:2022(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11611:2015(Main)
Protective clothing for use in welding and allied processes (ISO 11611:2015)
EN ISO 11611:2015

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this International Standard is only applicable to hoods and gaiters. This International Standard does not cover requirements for feet, hand, face and/or eye protectors.
This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten metal), short contact time with flame, radiant heat from an electric arc used for welding and allied processes, and minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d. c. in normal conditions of welding. Sweat, soiling or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face, hands and feet. Guidance for the selection of the type of welders clothing for different welding activities is detailed in Annex A of this International Standard.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 11611:2013(Main)
Protective clothing for use in welding and allied processes (ISO/DIS 11611:2013)
prEN ISO 11611 rev

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this International Standard is only applicable to hoods and gaiters. This International Standard does not cover requirements for hand protection or visors for face protection.
This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten metal), short contact time with flame, radiant heat from the arc, and minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d.c. in normal conditions of welding. Sweat, soiling or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. This International Standard specifies two classes with specific performance requirements (see Annex A), i.e. Class 1 being the lower level and Class 2 the higher level.
Class 1 is protection against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat.
Class 2 is protection against more hazardous welding techniques and situations, causing higher levels of spatter and radiant heat.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11611:2015(Main)
Protective clothing for use in welding and allied processes (ISO 11611:2015)
EN ISO 11611:2015

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this International Standard is only applicable to hoods and gaiters. This International Standard does not cover requirements for feet, hand, face and/or eye protectors.
This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten metal), short contact time with flame, radiant heat from an electric arc used for welding and allied processes, and minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d. c. in normal conditions of welding. Sweat, soiling or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face, hands and feet. Guidance for the selection of the type of welders clothing for different welding activities is detailed in Annex A of this International Standard.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 11611:2013(Main)
Protective clothing for use in welding and allied processes (ISO/DIS 11611:2013)
prEN ISO 11611 rev

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this International Standard is only applicable to hoods and gaiters. This International Standard does not cover requirements for hand protection or visors for face protection.
This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten metal), short contact time with flame, radiant heat from the arc, and minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d.c. in normal conditions of welding. Sweat, soiling or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. This International Standard specifies two classes with specific performance requirements (see Annex A), i.e. Class 1 being the lower level and Class 2 the higher level.
Class 1 is protection against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat.
Class 2 is protection against more hazardous welding techniques and situations, causing higher levels of spatter and radiant heat.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61800-5-1:2024(Main)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy (IEC 61800-5-1:2022 + COR1:2023)
EN IEC 61800-5-1:2023

IEC 61800-5-1:2022 specifies requirements for adjustable speed electrical power drive systems (PDS) or their elements, with respect to electrical, thermal, fire, mechanical, energy and other relevant hazards. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electrical PDS which include the power conversion, basic drive module (BDM)/complete drive module (CDM) control, and a motor or motors.
Excluded are traction and electric vehicle BDM/CDM.
It applies to low-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 1,0 kV AC (50 Hz or 60 Hz) and up to and including 1,5 kV DC. It also applies to high-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 35 kV AC (50 Hz or 60 Hz) and up to and including 52 kV DC.
This document also applies to PDS which intentionally emits or receives radio waves for the purpose of radio communication.
This edition includes the following significant technical changes with respect to the previous edition:

a) harmonization with IEC 62477-1:2022;

b) harmonization with UL 61800-5-1 and CSA C22.2 No. 274, including an annex with a list of national deviation which was considered not possible to harmonize within a reasonable timeframe;

c) more detailed information about the evaluation of components according to this document and relevant safety component standards;

d) updated requirement for mechanical hazards including multiple IP ratings.
  • Standard
    446 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    410 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62453-302:2024(Main)
Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 (IEC 62453-302:2023)
EN IEC 62453-302:2023

Communication Profile Family 2 (commonly known as CIPTM1) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNetTM2), CP 2/2 (EtherNet/IPTM3), and CP 2/3 (DeviceNetTM1) are defined in IEC 61784-1 and IEC 61784-2. An additional communication profile (CompoNetTM1), also based on CIPTM, is defined in [15].
This part of IEC 62453 provides information for integrating the CIPTM technology into the FDT interface specification (IEC 62453-2).
This part of IEC 62453 specifies communication and other services.
This specification neither contains the FDT specification nor modifies it.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 18048:2024(Main)
Methods of determination of the mechanical properties of self-bonding coating assemblies related to non-oriented electrical steels
CEN/TR 18048:2024

This document describes the mechanical testing methods, relevant for self-bonding coating assemblies with non-oriented electrical steels. In particular, it describes the mechanical testing methods, sample preparation, calibration methods, necessary to obtain reliable results that can be considered a reference for quality evaluation.
This document applies only to self-bonding coatings of non-oriented electrical steels.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61800-3:2024(Main)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools (IEC 61800-3:2022)
EN IEC 61800-3:2023

IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings.
As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM).
Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded.
This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow.
This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements.
This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified.
This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:


       
  1. extension of the scope to machine tools with one or more embedded PDS;

    2.    
  2. extension of the frequency range for radiated immunity tests to 6 GHz;

    3.    
  3. general updates in the normative part and the informative annexes.

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62751-2:2014/A2:2024(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (IEC 62751-2:2014/AMD2:2023)
EN 62751-2:2014/A2:2023
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62453-71:2024(Main)
Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for FDT (IEC 62453-71:2023)
EN IEC 62453-71:2023

IEC 62453-71:2023 specifies an OPC UA Information Model to represent the device information based on FDT-defined device integration.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day