iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 8407:2021/oprA1:2024

(Amendment)

Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens - Amendment 1 (ISO 8407:2021/DAM 1:2024)

Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens - Amendment 1 (ISO 8407:2021/DAM 1:2024)

Korrosion von Metallen und Legierungen - Entfernen von Korrosionsprodukten von Korrosionsprüfkörpern - Änderung 1 (ISO 8407:2021/DAM 1:2024)

Corrosion des métaux et alliages - Élimination des produits de corrosion sur les éprouvettes d'essai de corrosion - Amendement 1 (ISO 8407:2021/DAM 1:2024)

Korozija kovin in zlitin - Odstranjevanje produktov korozije s preskusnih vzorcev - Dopolnilo A1 (ISO 8407:2021/DAM 1:2024)

General Information

Status
Not Published
Public Enquiry End Date
23-May-2024
ICS
77.060 - Corrosion of metals
Technical Committee
IPKZ - Protection of metals against corrosion
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
25-Mar-2024
Due Date
12-Aug-2024
Ref Project
EN ISO 8407:2021/prA1 - Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens - Amendment 1 (ISO 8407:2021/DAM 1:2024)

Relations

Amends
SIST EN ISO 8407:2021 - Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
Effective Date
28-Jun-2023

Buy Standard

EN ISO 8407:2021/oprA1:2024EN ISO 8407:2021/oprA1:2024
PreviousNext
Draft
EN ISO 8407:2021/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8407:2021/oprA1:2024
01-maj-2024
Korozija kovin in zlitin - Odstranjevanje produktov korozije s preskusnih vzorcev -
Dopolnilo A1 (ISO 8407:2021/DAM 1:2024)
Corrosion of metals and alloys - Removal of corrosion products from corrosion test
specimens - Amendment 1 (ISO 8407:2021/DAM 1:2024)
Korrosion von Metallen und Legierungen - Entfernen von Korrosionsprodukten von
Korrosionsprüfkörpern - Änderung 1 (ISO 8407:2021/DAM 1:2024)
Corrosion des métaux et alliages - Élimination des produits de corrosion sur les
éprouvettes d'essai de corrosion - Amendement 1 (ISO 8407:2021/DAM 1:2024)
Ta slovenski standard je istoveten z: EN ISO 8407:2021/prA1
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 8407:2021/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 8407:2021/oprA1:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 8407:2021/oprA1:2024
DRAFT
Amendment
ISO 8407:2021/
DAM 1
ISO/TC 156
Corrosion of metals and alloys —
Secretariat: SAC
Removal of corrosion products from
corrosion test specimens
Voting begins on:
2024-03-04
AMENDMENT 1
Voting terminates on:
2024-05-27
Corrosion des métaux et alliages — Élimination des produits de
corrosion sur les éprouvettes d'essai de corrosion
AMENDEMENT 1
ICS: 77.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 8407:2021/DAM 1:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
SIST EN ISO 8407:2021/oprA1:2024
DRAFT
ISO 8407:2021/DAM 1:2024(en)
Amendment
ISO 8407:2021/
DAM 1
ISO/TC 156
Corrosion of metals and alloys —
Secretariat: SAC
Removal of corrosion products from
corrosion test specimens
Voting begins on:
AMENDMENT 1
Voting terminates on:
Corrosion des métaux et alliages — Élimination des produits de
corrosion sur les éprouvettes d'essai de corrosion
AMENDEMENT 1
ICS: 77.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO 8407:2021/DAM 1:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
SIST EN ISO 8407:2021/oprA1:2024
ISO 8407:2021/DAM 1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical st
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10062:2023(Main)
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
EN ISO 10062:2022

ISO 10062:2006 specifies tests which are intended to determine the influence of one or more flowing polluting gas(es) at volume fractions less than or equal to 0,000001 on test samples and/or articles of metals and alloys with or without corrosion protection under determined conditions of temperature and relative humidity.
These tests apply to metals and their alloys, metallic coatings (anodic and cathodic), metals with conversion coatings, metals with anodic oxide coatings, and metals with organic coatings.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9227:2023(Main)
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
EN ISO 9227:2022

This document specifies the apparatus, the reagents and the procedure to be used in conducting the
neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray
(CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent
or temporary corrosion protection.
It also describes the method employed to evaluate the corrosivity of the test cabinet environment.
It does not specify the dimensions or types of test specimens, the exposure period to be used for a
particular product, or the interpretation of results. Such details are provided in the appropriate product
specifications.
The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects,
in certain metallic, organic, anodic oxide and conversion coatings.
The NSS test is particularly applicable to:
— metals and their alloys;
— metallic coatings (anodic and cathodic);
— conversion coatings;
— anodic oxide coatings;
— organic coatings on metallic materials.
The AASS test is especially useful for testing decorative coatings of copper + nickel + chromium, or
nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The CASS test is useful for testing decorative coatings of copper + nickel + chromium, or nickel +
chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The salt spray methods are all suitable for checking that the quality of a metallic material, with or
without corrosion protection, is maintained. They are not intended to be used for comparative testing
as a means of ranking different materials relative to each other with respect to corrosion resistance or
as means of predicting long-term corrosion resistance of the tested material.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21207:2022(Main)
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
EN ISO 21207:2022

This International Standard defines two accelerated corrosion test methods to be used in assessing the
corrosion resistance of products with metals in environments where there is a significant influence of
chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of
corrosion-promoting gases from industrial or traffic air pollution.
This International Standard specifies both the test apparatus and test procedures to be used in
executing the accelerated corrosion tests.
The methods are especially suitable for assessing the corrosion resistance of sensitive products with
metals, e.g. electronic components, used in traffic and industrial environments.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22479:2022(Main)
Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
EN ISO 22479:2022

This document specifies a method for assessing the resistance of materials or products to a humid
atmosphere containing sulfur dioxide.
This method is applicable to testing metals and alloys, metallic and non-organic coatings and organic
coatings.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16539:2022(Main)
Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013)
EN ISO 16539:2022

This document specifies two accelerated corrosion test procedures, Methods A and B, for the evaluation of corrosion behaviour of surface-treated metals and their alloys with and without paint on them in atmospheric environments. It also specifies the apparatus used. The two tests involve salt deposition and dry/wet conditions at a constant absolute humidity.
Method A applies to: metals and their alloys (including corrosion-resistance alloys)
Method B applies to: metals and their alloys; metals and their alloys with coatings [including metallic coatings (anodic or cathodic), organic coatings, and conversion coatings]

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24656:2022(Main)
Cathodic protection of offshore wind structures (ISO 24656:2022)
EN ISO 24656:2022

This European Standard will address the external and internal cathodic protection for offshore wind farm structures. It will be applicable for structures and appurtenances in contact with seawater or seabed environments.  This Standard addresses:
•   Design and implementation of cathodic protection systems for new structures,
•   Assessment of residual lifetime of existing cathodic protection systems,
•   Design and implementation of retrofit cathodic protection systems for improvement of the protection level or for life extension of the protection,
•   Inspection and performance monitoring of cathodic protection systems installed on existing structures,
•   Guidance on cathodic protection of reinforced concrete structures

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12696:2022(Main)
Cathodic protection of steel in concrete (ISO 12696:2022)
EN ISO 12696:2022

This document specifies performance requirements for cathodic protection of steel in cement-based
concrete, in both new and existing structures. It covers building and civil engineering structures,
including carbon steel reinforcement and prestressed reinforcement embedded in the concrete. It is
applicable to uncoated steel reinforcement and to organic-coated steel reinforcement. It is not applicable
to reinforced concrete containing electrically conductive fibres (e.g. carbon or steel).
This document applies to steel embedded in atmospherically exposed, buried, immersed and tidal
elements of buildings or structures.
This document is only applicable to the applications of cathodic protection to steel in concrete which
are designed with the intention to, and can be demonstrated to, meet the criteria of protection specified
in 8.6. This requires the provision of sufficient performance monitoring systems as specified in 6.3 to
all parts of the structure intended to be protected, in order to assess the extent to which the criteria in
8.6 are met.
This document does not apply to galvanic anodes or systems applied into patch repairs to reduce the
effects of ‘incipient anodes’. This document does also not apply to any form of cathodic protection
systems or other electrochemical treatments that either cannot meet the requirements of 8.6 or are not
provided with the performance monitoring systems (see 6.3) that are necessary to assess whether the
criteria of protection specified in 8.6 are met.
NOTE 1 Annex A gives guidance on the principles of cathodic protection and its application to steel in concrete.
NOTE 2 This document, while not specifically intended to address cathodic protection of steel in any
electrolyte except concrete, can be applied to cathodic protection of steel in other cementitious materials such as
are found, for example, in early 20th century steel-framed masonry, brick and terracotta clad buildings. In such
applications, additional considerations specific to these structures are required in respect of design, materials
and installation of cathodic protection; however, the requirements of this document can be applied to these
systems

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15112:2022(Main)
External cathodic protection of well casings
EN 15112:2022

This document specifies methods used to evaluate the external corrosion hazards of well casings, as well as cathodic protection means and devices to be implemented in order to prevent corrosion of the external part of these wells in contact with the soil.
This document applies to any gas, oil or water well with metallic casing, whether cemented or not.
However, in special conditions (shallow casings: e.g. 50 m, and homogeneous soil), EN 12954 can be used to achieve the cathodic protection and assess its efficiency.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10270:2022(Main)
Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
EN ISO 10270:2022

This document specifies:
a) the determination of mass gain;
b) the surface inspection of products of zirconium and its alloys when corrosion is tested in water at
360 °C or in steam at or above 400 °C;
c) the performance of tests in steam at 10,3 MPa.
This document is applicable to wrought products, castings, powder metallurgy products and weld
metals.
This method has been widely used in the development of new alloys, heat-treating practices and for
the evaluation of welding techniques. It is applicable for use in its entirety to the extent specified for a
product acceptance test, rather than merely a means of assessing performance in service.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21857:2021(Main)
Petroleum, petrochemical and natural gas industries - Prevention of corrosion on pipeline systems influenced by stray currents (ISO 21857:2021)
EN ISO 21857:2021

This document establishes the general principles to be adopted to minimize the effects of stray current
corrosion caused by direct-current (d.c.) on buried or immersed pipeline systems. A brief description of
alternating current (a.c.) effects is provided.
The document is intended to offer guidance for:
— the design of cathodic protection systems which may produce stray currents;
— the design of pipeline systems, or elements of pipeline systems, which are to be buried or immersed and which may be subject to stray current corrosion;
— the selection of appropriate protection or mitigation measures.
The effects of a.c. induced voltages are not dealt with in detail in this document because they are
covered in ISO 18086. General principles and guidelines are, however, provided.
Stray current corrosion can also occur internally in systems containing a conducting electrolyte e.g.
near insulating joints or high resistance pipe joints in pipelines transporting conductive fluids.
Internal corrosion risks from stray currents are not dealt with in detail in this document but principles
and measures described here can be applicable for minimizing the interference effects.
Stray currents can also cause other effects such as overheating. These other effects are not covered in
this document.
A.C. currents can induce unacceptable touch voltages on above-ground appurtenances of pipeline
systems. These are not covered in detail in this document. They are covered in EN 50443, EN 61140,
IEC 60364-4-41, IEC TS 60479-1, IEC 60364-5-52, IEC /TS 61201, and IEC TR 60479-5.
Systems which may be affected by stray currents include buried or immersed metal structures such as:
a) pipeline systems;
b) metal sheathed cables;
c) tanks and vessels;
d) earthing systems;
e) steel reinforcement in concrete;
f) sheet steel piling.
This document provides details only for pipeline systems although the principles can be applied to
other buried structures. The EN 50162 series of standards also provide guidance for railway related
structures.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day