SIST EN 1340:2003/AC:2006
(Amendment)Concrete kerb units - Requirements and test methods
Concrete kerb units - Requirements and test methods
This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs.
Bordsteine aus Beton - Anforderungen und Prüfverfahren
Bordures en béton - Prescriptions et méthodes d'essai
Betonski robniki - Zahteve in preskusne metode
General Information
- Status
- Published
- Publication Date
- 30-Nov-2006
- Technical Committee
- BBB - Concrete, reinforced concrete and prestressed concrete
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2006
- Due Date
- 01-Dec-2006
- Completion Date
- 01-Dec-2006
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
SIST EN 1340:2003/AC:2006 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Concrete kerb units - Requirements and test methods". This standard covers: This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs.
This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs.
SIST EN 1340:2003/AC:2006 is classified under the following ICS (International Classification for Standards) categories: 91.100.30 - Concrete and concrete products; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1340:2003/AC:2006 has the following relationships with other standards: It is inter standard links to SIST EN 1340:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1340:2003/AC:2006 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/119, M/122. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 1340:2003/AC:2006 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Betonski robniki - Zahteve in preskusne metodeBordsteine aus Beton - Anforderungen und PrüfverfahrenBordures en béton - Prescriptions et méthodes d'essaiConcrete kerb units - Requirements and test methods93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 1340:2003/AC:2006SIST EN 1340:2003/AC:2006en01-december-2006SIST EN 1340:2003/AC:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1340:2003/ACMay 2006Mai 2006Mai 2006ICS 93.080.20English versionVersion FrançaiseDeutsche FassungConcrete kerb units - Requirements and test methodsBordures en béton - Prescriptions etméthodes d'essaiBordsteine aus Beton - Anforderungen undPrüfverfahrenThis corrigendum becomes effective on 17 May 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 17 mai 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 17.Mai 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 1340:2003/AC:2006 D/E/FSIST EN 1340:2003/AC:2006
English version
Title page
In the French title, delete 'de trottoir'.
Contents
Insert the sub-clause numbers and indent the titles in clause 6.1 and D.7.
Delete the second 'Annex ZA' in the title of this annex.
Foreword
Move the last paragraph above 'No existing European Standard is superseded', to become the fifth paragraph.
Clause 3.1
Amend the definition to read:
concrete curb unit
precast concrete unit, individually or in combination with other units, intended to separate surfaces of the same or of different levels to provide physical or visual delineation or containment and separation between areas submitted to different kinds of traffic'.
Clause 3.12
Amend the definition to read:
secondary processing manufacturing process to texture the whole kerb or any surface, carried out after basic manufacture before or after hardening
Clause 5.2.3.2
At the end of the first paragraph, insert '(see Figure 5)'.
Clause 5.3.1
In the second paragraph, last line, replace 'confirming to' with 'complying with'.
Table 2.1
In the second row, delete 'as a mean'.
Clause 5.3.4.2
Amend the title of this sub-clause to read: 'Performance and classes'.
Clause 6
Delete 'criteria' in the title of this clause.
Table 6
In the third and fifth row, in the column 'Conformity criteria', add 'for the declared class'.
At the end of sub-clause B, add a new paragraph to read: 'If the sample and the corresponding production are not accepted, 6.3.7 applies.'
Clause 6.3.8.3
Sub-clause A, item b), second line, insert after 'declared class': 'but not lower than the minimum value of Table 3 for the declared class
...
제목: SIST EN 1340:2003/AC:2006 - 콘크리트 경계 유닛 - 요구 사항과 시험 방법 내용: 이 유럽 표준은 도로 피로 경계 영역 및 지붕 재료에 사용되는 미철강, 시멘트 결합 사전 주조 콘크리트 경계 유닛, 채널 및 보완 부품에 대한 재료, 특성, 요구 사항 및 시험 방법을 명시합니다. 이 유닛은 분리, 물리적 또는 시각적 구분, 배수 제공 또는 포장된 영역이나 기타 표면의 함유를 위해 사용됩니다. 스터드 타이어를 규칙적으로 사용하는 경우 추가 요구 사항이 때때로 필요합니다. 이 표준은 제품 표시 및 제품이 이 유럽 표준에 대해 준수성을 평가하기 위한 규정을 제공합니다. 허용 공차를 제외하고,이 표준에는 단면, 모양 및 치수에 대한 요구 사항이 포함되어 있지 않습니다. 이 표준은 경계의 신체감 또는 가시성에 대해 다루지 않습니다.
The article discusses the European Standard SIST EN 1340:2003/AC:2006, which outlines the requirements and test methods for cement bound precast concrete kerb units. These units are used for separation, delineation, drainage, and containment in paved areas. The standard covers materials, properties, marking, and conformity evaluation, but does not address cross-sections, shapes, dimensions, tactility, or visibility of the kerbs. Additional requirements may be necessary for use with studded tires.
記事のタイトル:SIST EN 1340:2003/AC:2006 - コンクリート縁石ユニット-要件と試験方法 記事の内容:この欧州規格では、交通路で使用する未強化のセメント固定のプレキャストコンクリートの縁石ユニット、チャネル、補完部品の材料、特性、要件、試験方法について規定しています。これらのユニットは、分離、物理的または視覚的な区別、排水の提供、舗装されたエリアや他の表面の封鎖などの目的で使用されます。スタッドタイヤを定期的に使用する場合、追加の要件が必要な場合があります。この規格では、製品のマーキング、およびこの欧州規格への製品の適合性評価を提供しています。公差を除いて、この規格には断面形状や寸法の要件は含まれていません。また、縁石の触感や見え方については扱っていません。
기사 제목: SIST EN 1340:2003/AC:2006 - 콘크리트 경계 유닛 - 요구 사항과 시험 방법 기사 내용: 이 유럽 표준은 교통이 많은 포장된 지역과 지붕 커버링에 사용되는 무보강 시멘트 결합 프리캐스트 콘크리트 경계 유닛, 채널 및 보완 부속품에 대한 재료, 속성, 요구 사항 및 시험 방법을 명시합니다. 이 유닛은 분리, 물리적 또는 시각적 윤곽선, 배수 또는 포장된 지역 또는 기타 표면의 포함 등을 충족하기 위해 사용됩니다. 스터드 타이어의 정기적인 사용의 경우, 추가 요구 사항이 때때로 필요합니다. 이 표준은 제품 표시 및 제품의 이 유럽 표준에 대한 일치성 평가를 위한 것입니다. 허용한계를 제외하고 이 표준에는 단면, 모양 및 크기에 대한 요구 사항이 포함되어있지 않습니다. 이 표준은 경계의 촉감 또는 가시성에 대해 다루지 않습니다.
記事のタイトル:SIST EN 1340:2003/AC:2006 - コンクリート舗装ブロック - 要件とテスト方法 記事の内容:この欧州標準は、交通量の多い舗装エリアや屋根のカバーに使用される補強なしのセメント結合プリキャストコンクリート舗装ブロック、チャネル、および補完部品の材料、特性、要件、およびテスト方法を指定しています。これらのブロックは、分離、物理的または視覚的区別、排水、舗装エリアまたは他の表面の制約を満たすために使用されます。スタッドタイヤの定期的な使用には、追加の要件が必要な場合があります。この基準では、製品のマーキングとこの欧州標準への製品の適合性評価について規定しています。許容範囲を除き、この基準には断面形状や寸法に関する要件は含まれていません。また、基準では舗装ブロックの触感や視認性については取り扱っていません。
The article discusses the requirements and test methods for precast concrete kerb units in trafficked paved areas and roof coverings. It specifies the materials, properties, and test methods for these kerb units, which are used for separation, delineation, drainage, or containment purposes. Additional requirements may be needed for use with studded tyres. The article also mentions product marking and evaluation of conformity to this European standard. However, it does not cover requirements for cross-sections, shapes, dimensions, tactility, or visibility of kerbs.










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...