SIST EN 818-4:1999
(Main)Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
This European Standard specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings assembled by: a) mechanical joining devices; b) welding. using short link grade 8 medium tolerance lifting chain conforming to EN 818-2 together with the appropriate range of components of the same grade. Note: Instructions for use and maintenance of chain slings are covered by prEN 818-6. The hazards covered by this European Standard are identified in clause 4. Bases for the calculation of working load limits are given in Annex B. Annex C gives an example of a designation system for chain slings.
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 4: Anschlagketten - Güteklasse 8
Diese Europäische Norm legt Anforderungen in bezug auf Sicherheit, Einstufungsmethoden und Prüfverfahren für ein-, zwei-, drei- und viersträngige Anschlagketten und für Kranzketten in a) montierter Bauart und in b) geschweißter Bauart fest, unter Benutzung von Rundstahlketten der Güteklasse 8 nach prEN 818-2 zusammen mit zugeordneten Bauteilen der gleichen Güteklasse. Anmerkung: Gebrauch und Instandhaltung von Anschlagketten ist durch prEN 818-6 abgedeckt.
Chaînes de levage a maillons courts - Sécurité - Partie 4: Elingues en chaînes - Classe 8
La présente norme européenne définit les prescriptions relatives à la sécurité, les méthodes de détermination de la charge d'utilisation et d'essai des élingues en chaînes à un, deux, trois et quatre brin(s) ainsi que les élingues sans fin assemblées par: a) dispositifs d'assemblage mécanique; b) soudage utilisant une chaîne de levage à maillons courts de classe 8, de tolérance moyenne, conforme au prEN 812-2, associée à une gamme d'accessoires adaptée de même classe. Note: Les instructions pour l'utilisation et l'entretien des élingues en chaînes sont couvertes par le prEN 818-6.
Kratkočlene okrogle verige za dvigovalne namene - Varnost - 4. del: Obešalne verige - Kakovostni razred 8
General Information
- Status
- Withdrawn
- Publication Date
- 31-Mar-1999
- Withdrawal Date
- 18-Aug-2010
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 9900 - Withdrawal (Adopted Project)
- Start Date
- 17-Aug-2010
- Due Date
- 09-Sep-2010
- Completion Date
- 19-Aug-2010
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 01-Sep-2010
- Consolidated By
SIST EN 818-4:1999+A1:2008 - Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 - Effective Date
- 18-Jan-2023
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
SIST EN 818-4:1999 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8". This standard covers: This European Standard specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings assembled by: a) mechanical joining devices; b) welding. using short link grade 8 medium tolerance lifting chain conforming to EN 818-2 together with the appropriate range of components of the same grade. Note: Instructions for use and maintenance of chain slings are covered by prEN 818-6. The hazards covered by this European Standard are identified in clause 4. Bases for the calculation of working load limits are given in Annex B. Annex C gives an example of a designation system for chain slings.
This European Standard specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings assembled by: a) mechanical joining devices; b) welding. using short link grade 8 medium tolerance lifting chain conforming to EN 818-2 together with the appropriate range of components of the same grade. Note: Instructions for use and maintenance of chain slings are covered by prEN 818-6. The hazards covered by this European Standard are identified in clause 4. Bases for the calculation of working load limits are given in Annex B. Annex C gives an example of a designation system for chain slings.
SIST EN 818-4:1999 is classified under the following ICS (International Classification for Standards) categories: 53.020.30 - Accessories for lifting equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 818-4:1999 has the following relationships with other standards: It is inter standard links to SIST EN 818-4:1999+A1:2008, SIST EN 818-4:1999+A1:2008, SIST EN 818-4:1999/oprA1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 818-4:1999 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/91/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 818-4:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1999
.UDWNRþOHQHRNURJOHYHULJH]DGYLJRYDOQHQDPHQH9DUQRVWGHO 2EHãDOQH
YHULJH.DNRYRVWQLUD]UHG
Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 4: Anschlagketten -
Güteklasse 8
Chaînes de levage a maillons cour
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...