SIST EN 16350:2014
(Main)Protective gloves - Electrostatic properties
Protective gloves - Electrostatic properties
This European Standard provides additional requirements for protective gloves that are worn in areas where flammable or explosive areas exist or might be present (see IEC 60079-32-1). It specifies a test method and requirements for performance, marking and information for electrostatic dissipative protective gloves to minimize explosion risks.
This European Standard does not cover:
- protection of electronic devices;
- protection against mains voltages;
- insulative protective gloves for live working (EN 60903);
- protective gloves for welders (EN 12477).
The requirements may not be sufficient in oxygen enriched flammable atmospheres.
This European Standard should be used with the specific standards applicable to the risks for which the glove is designed.
NOTE The electrostatic dissipative protective gloves are effective only if the wearer is earthed through a resistance lower than108 Ω.
Schutzhandschuhe - Elektrostatische Eigenschaften
Diese Europäische Norm stellt zusätzliche Anforderungen an Schutzhandschuhe auf, die in Bereichen getragen werden, in denen brennbare oder explosionsfähige Atmosphären existieren oder existieren können (siehe IEC 60079-32-1). Sie legt ein Prüfverfahren sowie Anforderungen an die Leistung, Kennzeichnung und Informationen zu elektrostatisch ableitfähigen Schutzhandschuhen fest, um das Risiko einer Explosion so gering wie möglich zu halten.
Diese Europäische Norm behandelt nicht:
- Schutz elektronischer Geräte;
- Schutz vor Netzspannungen;
- isolierende Schutzhandschuhe für Arbeiten unter Spannung (EN 60903);
- Schutzhandschuhe für Schweißer (EN 12477).
Die Anforderungen sind möglicherweise für mit Sauerstoff angereicherte, brennbare Atmosphären nicht ausreichend.
Diese Europäische Norm sollte gemeinsam mit den speziellen Normen angewendet werden, die auf die Risiken zutreffen, für die die Handschuhe entwickelt wurden.
ANMERKUNG Elektrostatisch ableitfähige Schutzhandschuhe sind nur wirksam, wenn der Träger über einen Wider-stand von weniger als 108 geerdet ist.
Gants de protection - Propriétés électrostatiques
La présente Norme européenne fournit des exigences supplémentaires pour les gants de protection qui sont portés dans un environnement comprenant ou susceptible de comprendre des zones inflammables ou explosives (voir IEC 60079-32-1). Elle spécifie une méthode d'essai et des exigences concernant les performances, le marquage et des informations applicables aux gants de protection à dissipation électrostatique pour réduire le plus possible les risques d'explosion.
La présente Norme européenne ne traite pas :
- de la protection des dispositifs électroniques ;
- de la protection contre les tensions du réseau ;
- des gants de protection isolants pour travaux sous tension (EN 60903) ;
- des gants de protection pour soudeurs (EN 12477).
Ces exigences peuvent se révéler insuffisantes dans les atmosphères inflammables enrichies en oxygène.
Il convient que la présente Norme européenne soit utilisée en association avec les normes spécifiques applicables aux autres risques pour lesquels le gant est conçu.
NOTE Les gants de protection à dissipation électrostatique ne sont efficaces que si le porteur est relié à la terre par une résistance inférieure à 108 Ω.
Varovalne rokavice - Elektrostatične lastnosti
Standard EN 16350 določa dodatne zahteve za zaščitne rokavice, ki se uporabljajo na območjih, kjer na določenih področjih morda obstaja nevarnost ognja ali eksplozije (glej IEC 60079-32-1). Določa preskusne metode in zahteve za lastnosti, označevanje in informacije za elektrostatične disipativne zaščitne rokavice za zmanjšanje nevarnosti eksplozije. Ta evropski standard ne zajema: - zaščite elektronskih naprav; - zaščite pred omrežnimi napetostmi; - izolacijske zaščitne rokavice za delo pod napetostjo (EN 60903); - zaščitne rokavice za varilce (EN 12477). Zahteve morda ne zadostujejo za področja, obogatena s kisikom in z vnetljivim ozračjem. Ta evropski standard naj se uporablja s posebnimi standardi, ki veljajo za nevarnosti, za katere so te rokavice zasnovane.
General Information
- Status
- Published
- Public Enquiry End Date
- 19-Feb-2012
- Publication Date
- 30-Jun-2014
- Technical Committee
- OVP - Personal protecting equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 19-May-2014
- Due Date
- 24-Jul-2014
- Completion Date
- 01-Jul-2014
Overview
SIST EN 16350:2014 is a European Standard established by CEN that sets forth additional requirements and test methods for protective gloves with electrostatic dissipative properties. These gloves are designed specifically for use in environments where flammable or explosive atmospheres may exist, such as those outlined in IEC 60079-32-1. The standard aims to minimize explosion risks by ensuring gloves can safely dissipate electrostatic charges under controlled conditions.
This standard complements general protective glove standards by specifying performance, marking, and information requirements related to electrostatic properties. It excludes gloves intended for protection against mains voltages, welding, or live working (as covered in EN 60903 and EN 12477). SIST EN 16350:2014 is essential for manufacturers, safety professionals, and users working in hazardous atmospheric conditions where electrostatic discharge could trigger ignition.
Key Topics
Scope and Application:
SIST EN 16350:2014 applies to electrostatic dissipative protective gloves used in potentially explosive environments. It does not cover gloves for electronic device protection, welding, or electrical insulation for live work.Electrostatic Property Requirements:
Gloves must have a vertical electrical resistance (Rv) less than 1.0 × 10^8 ohms to qualify as electrostatic dissipative, tested following specific procedures.Material and Design Constraints:
Gloves should avoid electrically conductive connections such as metal rivets and must have permanently attached external components (labels, reflective stripes). Hook and loop adjustment systems are prohibited to prevent electrostatic hazards.Testing Methods:
Vertical resistance measurements are to be conducted on palm specimens under controlled environmental conditions (23 ± 1 °C temperature, 25 ± 5% relative humidity), using test apparatus compliant with EN 1149-2:1997 or EN 61340-2-3 standards.Marking and Manufacturer Information:
Markings follow EN 420 general glove requirements and must include warnings about proper earthing, restricted glove handling in explosive atmospheres, and limitations in oxygen-enriched environments. Manufacturers must provide vertical resistance test data and essential instructions for safe use.Safety Notes:
Electrostatic dissipative gloves are only effective if the wearer is properly earthed through a resistance less than 10^8 ohms, typically by combining glove use with appropriate footwear.
Applications
SIST EN 16350:2014 protective gloves are crucial in industries and settings such as:
Petrochemical and Chemical Plants:
Where flammable gases or vapors may form explosive atmospheres.Pharmaceutical Manufacturing:
Protecting workers handling volatile solvents and powders prone to ignition by static electricity.Fuel Stations and Storage Facilities:
Reducing ignition risks during fuel dispensing or storage operations.Paint Shops and Coating Operations:
Where electrostatic dissipation can prevent dangerous sparks.Mining and Explosive Handling:
Enhancing personnel safety in environments with combustible dust or gases.
Using gloves compliant with SIST EN 16350:2014 helps employers meet safety regulations and reduce fire and explosion hazards related to static electricity. Combined with suitable grounding and workplace protocols, these gloves safeguard workers and equipment in sensitive zones.
Related Standards
Users and manufacturers should consider SIST EN 16350:2014 alongside the following standards for comprehensive hand protection and electrostatic risk management:
EN 420: General requirements and test methods for protective gloves - foundational standard referenced for marking and basic glove performance.
EN 1149-2: Test methods for measuring electrical resistance through materials to evaluate electrostatic properties.
EN 60903: Standards for insulating gloves used in live electrical work - excluded from EN 16350 scope but important for electrical safety.
EN 12477: Protective gloves for welders, excluded due to different safety requirements.
IEC 60079-32-1: Guidance on electrostatic hazards in explosive atmospheres, providing context for electrostatic dissipative PPE.
Complying with SIST EN 16350:2014 in conjunction with these standards ensures robust protection against electrostatic discharge in various hazard-prone environments.
Keywords: EN 16350, electrostatic dissipative gloves, protective gloves standard, flammable atmosphere PPE, explosion risk minimization, electrostatic properties, vertical resistance gloves, electrostatic safety gloves, CEN glove standard, protective handwear explosive areas.
Frequently Asked Questions
SIST EN 16350:2014 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Protective gloves - Electrostatic properties". This standard covers: This European Standard provides additional requirements for protective gloves that are worn in areas where flammable or explosive areas exist or might be present (see IEC 60079-32-1). It specifies a test method and requirements for performance, marking and information for electrostatic dissipative protective gloves to minimize explosion risks. This European Standard does not cover: - protection of electronic devices; - protection against mains voltages; - insulative protective gloves for live working (EN 60903); - protective gloves for welders (EN 12477). The requirements may not be sufficient in oxygen enriched flammable atmospheres. This European Standard should be used with the specific standards applicable to the risks for which the glove is designed. NOTE The electrostatic dissipative protective gloves are effective only if the wearer is earthed through a resistance lower than108 Ω.
This European Standard provides additional requirements for protective gloves that are worn in areas where flammable or explosive areas exist or might be present (see IEC 60079-32-1). It specifies a test method and requirements for performance, marking and information for electrostatic dissipative protective gloves to minimize explosion risks. This European Standard does not cover: - protection of electronic devices; - protection against mains voltages; - insulative protective gloves for live working (EN 60903); - protective gloves for welders (EN 12477). The requirements may not be sufficient in oxygen enriched flammable atmospheres. This European Standard should be used with the specific standards applicable to the risks for which the glove is designed. NOTE The electrostatic dissipative protective gloves are effective only if the wearer is earthed through a resistance lower than108 Ω.
SIST EN 16350:2014 is classified under the following ICS (International Classification for Standards) categories: 13.340.40 - Hand and arm protection. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 16350:2014 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 16350:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhandschuhe - Elektrostatische EigenschaftenGants de protection - Propriétés électrostatiquesProtective gloves - Electrostatic properties13.340.40Varovanje dlani in rokHand and arm protectionICS:Ta slovenski standard je istoveten z:EN 16350:2014SIST EN 16350:2014en,fr,de01-julij-2014SIST EN 16350:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16350
April 2014 ICS 13.340.40 English Version
Protective gloves - Electrostatic properties
Gants de protection - Propriétés électrostatiques
Schutzhandschuhe - Elektrostatische Eigenschaften This European Standard was approved by CEN on 20 March 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16350:2014 ESIST EN 16350:2014
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC .8 Bibliography .9
1 Scope This European Standard provides additional requirements for protective gloves that are worn in areas where flammable or explosive areas exist or might be present (see IEC 60079-32-1). It specifies a test method and requirements for performance, marking and information for electrostatic dissipative protective gloves to minimize explosion risks. This European Standard does not cover: — protection of electronic devices; — protection against mains voltages; — insulative protective gloves for live working (EN 60903); — protective gloves for welders (EN 12477). The requirements may not be sufficient in oxygen enriched flammable atmospheres. This European Standard should be used with the specific standards applicable to the risks for which the glove is designed. NOTE The electrostatic dissipative protective gloves are effective only if the wearer is earthed through a resistance lower than108 Ω. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 420, Protective gloves — General requirements and test methods EN 1149-2:1997, Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) EN 61340-2-3, Electrostatics — Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge
...
SIST EN 16350:2014는 전자기적 성질을 가진 보호 장갑에 대한 유럽 표준으로, 화재나 폭발 위험이 있는 지역에서 착용하는 보호 장갑에 대한 추가 요구사항을 제공합니다. 이 표준은 IEC 60079-32-1에 기반하여 설계되었으며, 전자기적으로 방전되는 보호 장갑의 성능, 마킹, 정보 제공을 위한 시험 방법과 요구 사항을 명시하고 있습니다. 이 표준의 중요한 강점 중 하나는 폭발 위험을 최소화하기 위한 명확한 시험 방법과 성능 요구 사항을 포함하고 있다는 것입니다. 전자기 방전이 필요한 상황에서 사용자와 장갑 사이의 전기적 저항이 108Ω 이하일 때 효과적이라는 점은, 이러한 보호 장갑이 제대로 작동하기 위해 반드시 고려되어야 할 요소입니다. SIST EN 16350:2014은 특정 위험에 대해 설계된 다른 표준과 함께 활용되어야 한다는 점에서 그 적용 범위의 중요성이 강조됩니다. 또한 이 표준은 전자 장치 보호, 주 전압 보호, Live 작업을 위한 절연 장갑 또는 용접사 보호 장갑과 같은 특정 요구를 다루지 않음을 명확히 하고 있어, 사용자가 필요에 따라 적절한 표준을 선택하는 데 도움을 줍니다. 이로 인해 표준의 적합성과 신뢰성이 한층 높아집니다. 결론적으로, SIST EN 16350:2014는 전자기 방전 보호 장갑의 안전성과 효율성을 보장하기 위한 필수적인 문서로, 화재 및 폭발 위험이 존재하는 환경에서 필수적으로 고려되어야 할 표준입니다.
SIST EN 16350:2014は、可燃性または爆発性のある環境で使用される保護手袋に関する重要な欧州規格です。この規格は、静電気放散特性を有する保護手袋のための追加要件を提供し、爆発リスクを最小限に抑えることを目的としています。この文書は、特に試験方法や性能要件、マーキングおよび情報提供に関する詳細を規定しており、静電気放散保護手袋の重要性を強調しています。 この標準の強みは、静電気の影響を受ける可能性がある作業環境において、効果的に保護を提供するための明確なガイダンスを提供する点です。特に、手袋の設計において、着用者が抵抗値108 Ω以下で接地されている必要があることを明記しており、適切な使用条件を明確にしています。これは、使用者の安全を確保するために重要な要素であり、セーフティスタンダードとしての信頼性を高めています。 ただし、この規格は全ての危険に対応できるわけではなく、電子機器の保護や主電圧に対する保護、電力作業に使用される絶縁手袋、溶接作業者向けの保護手袋には適用されません。また、酸素濃度が高い可燃性の雰囲気においては、要件が不十分である可能性がある点についても明確に警告されています。これにより、利用者は特定のリスクに適した基準と併用する必要があることを認識できます。 SIST EN 16350:2014の関連性は、爆発性環境での安全性の向上に密接に結びついており、保護手袋の選定において重要な基準となります。特に、業界内での安全基準を遵守するためには、この規格が基盤となることが求められます。静電気放散保護手袋の必要性が高まる現代の作業環境において、SIST EN 16350:2014は非常に重要な役割を果たしています。
The SIST EN 16350:2014 standard, titled "Protective gloves - Electrostatic properties," offers a critical framework for safety in environments where flammable or explosive atmospheres may exist. The scope of this European Standard delineates specific requirements for protective gloves, focusing particularly on their electrostatic properties. This characteristic is paramount for minimizing explosion risks, especially in industrial settings that utilize flammable materials. One of the key strengths of this standard is its comprehensive delineation of performance requirements, testing methods, and marking protocols for electrostatic dissipative protective gloves. These provisions ensure that gloves not only meet safety benchmarks but also provide essential guidance for manufacturers and users regarding proper use and application contexts. By specifying that electrostatic dissipative protective gloves are only effective if worn with a resistance less than 10^8 Ω, it addresses a crucial factor in safety compliance. The standard’s relevance is underscored by its clear boundaries regarding what it does not cover. By excluding protective measures for electronic devices, mains voltages, insulative gloves for live working, and welding gloves, the standard emphasizes its specialized focus. This targeted approach allows stakeholders to clearly understand the specific applications addressed by the side, while also guiding them toward appropriate standards for other safety needs. Furthermore, the statement regarding the requirements being potentially insufficient in oxygen-enriched flammable atmospheres emphasizes the need for cautious application and consultation of other relevant standards that may address such specific risks, hence promoting a holistic understanding of safety. Overall, SIST EN 16350:2014 serves as a vital resource for industries that operate in hazardous environments, ensuring that the use of electrostatic dissipative protective gloves enhances safety and reduces explosion risks effectively. The precision and clarity of this standard are crucial for making informed decisions regarding protective gear in potentially explosive settings.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...