iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50059:2001

(Main)

Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing

Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing

This European Standard specifies the constructional and test requirements for hand-held and hand-operated electrostatic spray guns and associated apparatus used to spray painting and finishing materials which are not flammable, with respect to the protection against high voltage electric shock. Note: the requirements for electrostatic hand-held spray guns and associated apparatus which are only to be used for flammable spraying materials are covered in European standard EN 50 050

Bestimmungen für elektrostatische Handsprüheinrichtungen für nichtbrennbare Sprühstoffe für Beschichtungen

Spécifications pour les équipements manuels de projection électrostatique de produits ininflammables pour peinture et finition

Specifikacija za ročno opremo za elektrostatično brizganje z nevnetljivimi materiali za barvanje in končno obdelavo

General Information

Status
Published
Publication Date
31-Jan-2001
ICS
87.100 - Paint coating equipment
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2001
Due Date
01-Feb-2001
Completion Date
01-Feb-2001
Ref Project
EN 50059:1990 - Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing

Relations

Revised
oSIST prEN 50059:2011 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
06-May-2014
Replaced By
SIST EN 50059:2018 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
31-Jul-2018
Revised
oSIST prEN 50059:2011 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
28-Jan-2023
Replaced By
SIST EN 50059:2018 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
07-Jun-2022
Revises
oSIST prEN 50059:2011 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
07-Jun-2022
Replaced By
oSIST prEN 50059:2011 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
13-May-2010
Revised
SIST EN 50059:2018 - Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials
Effective Date
09-Jul-2014

Buy Standard

EN 50059:2001EN 50059:2001
PreviousNext
Standard
EN 50059:2001
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50059:2001
01-februar-2001
6SHFLILNDFLMD]DURþQRRSUHPR]DHOHNWURVWDWLþQREUL]JDQMH]QHYQHWOMLYLPLPDWHULDOL
]DEDUYDQMHLQNRQþQRREGHODYR
Specification for electrostatic hand-held spraying equipment for non-flammable material
for painting and finishing
Bestimmungen für elektrostatische Handsprüheinrichtungen für nichtbrennbare
Sprühstoffe für Beschichtungen
Spécifications pour les équipements manuels de projection électrostatique de produits
ininflammables pour peinture et finition
Ta slovenski standard je istoveten z: EN 50059:1990
ICS:
87.100 Oprema za nanašanje Paint coating equipment
premazov
SIST EN 50059:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50059:2001

---------------------- Page: 2 -------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50223:2015(Main)
Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EN 50223:2015

1.1   This European Standard specifies requirements for automatic electrostatic flock application equipment which is designed for applying ignitable flock which may form explosive atmospheres in the flock application area. In this context a distinction is made between flock application devices which due to their type of construction comply with the requirements as laid down in EN 50050-3, as applicable, and those for which higher discharge energies are stipulated.
This European Standard also specifies the constructional requirements for a safe operation of the stationary equipment of flock application booths, including the electrical installations and the accessories.
This European Standard deals with all significant hazards, hazardous situations and events relevant to flock application booths, when they are used as intended and under conditions which are foreseeable as malfunction by the manufacturer (see Clause 4).
1.2   This European Standard considers three types of electrostatic flock systems. For more details, see Table 1.
1.3   This European Standard deals with those hazards occurring during stationary automatic electrostatic flocking. Among these hazards are, above all, ignition hazards of the generated explosive atmosphere and hazard to persons.
1.4   The stationary equipment dealt with in this European Standard is considered to be equipment of group II, category 3D for the use in areas with potential explosion hazards of zone 22.
1.5   This European Standard is not applicable for
-   flock systems in which mixtures of solvent vapours in air occur with a concentration of > 20 % of the LEL,
-   flock systems operated with AC voltage,
-   the application system for liquid or pasty substances (e.g. adhesives, primer),
-   the cleaning of flock application booths,
-   the storage and handling of ignitable substances outside the coating plant.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    51 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    55 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50050-2:2014(Main)
Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder
EN 50050-2:2013

This European Standard specifies the requirements for hand-held or hand-operated electrostatic spraying equipment for ignitable coating powders within a temperature range from 5 °C to 40 °C to be used in explosive atmospheres generated by their own spray cloud. This European Standard deals with all electrical hazards significant for the electrostatic spraying of coating powders, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere. This European Standard specifies the design-related and test requirements for electrostatic spraying equipment of type A-P according to Table 1 of EN 50177:2009. With regard to explosion protection and prevention measures, this standard also applies to ionisators with corona charging. Ionisators used together with or under similar conditions as electrostatic spraying equipment for ignitable coating powders are considered to be equipment of group II, category 2D for use in potentially explosive areas of zone 21 or 22. All other parts of ionisators are considered to be equipment of category 3D if they are installed or used in potentially explosive areas of zone 22, see Annex D. Electrostatic applicators are considered to be equipment of group II, category 2D for use in potentially explosive areas of zone 21 or 22, which have been generated by the equipment itself. All other parts of hand-held electrostatic spraying equipment are considered to be equipment of category 3D if they are installed or used in potentially explosive areas of zone 22. All other significant hazards relevant for applicators (e.g. ejection of powder, mechanical strength, electrical hazards (apart from the electrostatic hazards)), noise, explosion, contract with or inhalation of dangerous substances, ergonomics) are covered by EN 1953. This European Standard also gives details regarding quality assurance systems for electrostatic spraying equipment, see Annex C. Additional requirements may be applicable to equipment designed for use in food and pharmaceutical industry.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50050-3:2014(Main)
Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
EN 50050-3:2013

This European Standard specifies the requirements for hand-held or hand-operated electrostatic spraying equipment for ignitable flock within a temperature range from 5 °C to 40 °C to be used in explosive atmospheres generated by their own spray cloud. This European Standard deals with all electrical hazards significant for the electrostatic spraying of flock, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere. This European Standard specifies the design-related and test requirements for electrostatic spraying equipment of type A-F and type B-F according to Table 1 of EN 50223:2010. Electrostatic applicators are considered to be equipment of group II, category 3D for use in potentially explosive areas of zone 22. All other parts of hand-held electrostatic spraying equipment are considered to be equipment of category 3D if they are installed or used in potentially explosive areas of zone 22.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50050-1:2014(Main)
Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
EN 50050-1:2013

This European Standard specifies the requirements for hand-held or hand-operated electrostatic spraying equipment for ignitable liquid coating materials to be used in explosive atmospheres generated by their own spray cloud within a temperature range from 5 °C to 40 °C. This European Standard deals with all hazards significant for the electrostatic spraying of liquid coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere. This European Standard specifies the design-related and test requirements for electrostatic spraying equipment of type A-L according to Table 1 of EN 50176:2009. With regard to explosion protection and prevention measures, this European Standard also applies to ionisators with high voltage corona charging. Ionisators in conformity with EN 50050-1 provide equipment category 2G. Parts of ionisators, which are intended to be used or installed in Zone 2, provide equipment category 3G in conformity with EN 50050-1:2013.Electrostatic applicators are considered to be equipment of group II, category 2G for use in potentially explosive areas of zone 1 or 2, which have been generated by the equipment itself. All other parts of hand-held electrostatic spraying equipment are considered to be equipment of category 3G if they are installed or used in potentially explosive areas of zone 2. All other significant hazards relevant for applicators (e.g. ejection of fluids, mechanical strength, electrical hazards (apart from the electrostatic hazards), noise, explosion, contact with or inhalation of dangerous substances, ergonomics) are covered by EN 1953.This European Standard also gives details regarding quality assurance systems for electrostatic spraying equipment. Additional requirements may be applicable to equipment designed for use in food and pharmaceutical industry.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50177:2010/A1:2012(Amendment)
Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
EN 50177:2009/A1:2012

This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable coating powders to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050:2001 and spraying systems designed for higher discharge energies and/or currents. The charging of ignitable coating powder can be achieved by applying high voltage or triboelectrically. This European Standard also specifies the design-related requirements for a safe operation of the stationary equipment including its electrical installation. This European Standard considers three types of electrostatic spraying systems; see 5.1 for more details. This European Standard deals with all hazards significant for the electrostatic spraying of coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere, and the protection of persons from electric shocks. This stationary equipment is classified as equipment of group II, category 2D or category 3D for use in potentially explosive areas of zone 21 or 22, respectively.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50176:2010(Main)
Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 50176:2009

This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable liquid coating materials and for hard to ignite liquid coating materials to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050 and spraying systems designed for higher discharge energies and/or currents. This European Standard also specifies the design-related requirements for a safe operation of the stationary equipment including its electrical installation. 1.2 This European Standard considers four types of electrostatic spraying systems; see 5.1 for more details. 1.3 This European Standard deals with all hazards significant for the electrostatic spraying of coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere, and the protection of persons from electric shocks. 1.4 This stationary equipment is classified as equipment of group II, category 2G or category 3G for use in potentially explosive areas of zone 1 or 2, respectively.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50177:2010(Main)
Stationary electrostatic application equipment for ignitable coating powder - Safety requirements
EN 50177:2009

This European Standard specifies the requirements for stationary electrostatic application equipment for ignitable coating powders to be used in explosive atmospheres generated by their own spray cloud. A distinction is made between spraying systems corresponding to EN 50050:2001 and spraying systems designed for higher discharge energies and/or currents. The charging of ignitable coating powder can be achieved by applying high voltage or triboelectrically. This European Standard also specifies the design-related requirements for a safe operation of the stationary equipment including its electrical installation. This European Standard considers three types of electrostatic spraying systems; see 5.1 for more details. This European Standard deals with all hazards significant for the electrostatic spraying of coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. In particular, this includes ignition hazards resulting from the generated explosive atmosphere, and the protection of persons from electric shocks. This stationary equipment is classified as equipment of group II, category 2D or category 3D for use in potentially explosive areas of zone 21 or 22, respectively.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50176:2021(Main)
Automatic electrostatic application systems for ignitable coating materials - Safety requirements
FprEN 50176

1.1   This document specifies the electrical requirements for the design of automatic electrostatic application systems for liquid coating materials which can be ignited in an atomised state, used within a temperature range from 5 °C to 40 °C.
This document considers automatic electrostatic application systems for processing ignitable liquid coating materials, where the conductivity of the complete system is limited up to 50 nS/cm. Together with additional measures like e.g. potential separation systems, these requirements can also be applied to ignitable liquid coating materials, where the conductivity of the complete system is limited up to 2 000 μS/cm.
Ignition hazards related to the generated explosive atmosphere and the protection of persons against electric shock are considered.
1.2   This document specifies requirements for interfaces to and additional requirements for machinery according to EN 16985:2018, prEN 12621:2020 and prEN 1953:2020.
1.3   This document also specifies requirements for a safe operation of electrostatic application systems, including the electrical installation. The requirements consider both the processing of coating materials and the cleaning and purge processes.
1.4   This document considers three types of spraying systems; see 5.1.
Spraying systems are classified as equipment of group II, category 2G or category 3G.
Only electrostatic spraying systems operating with a d.c. sinusoidal ripple of not more than 10 % of the r.m.s. value are considered.
1.5   For electrostatic spraying equipment used in food and pharmaceutical industry, additional requirements could apply.
1.6   This document is not applicable to:
—   liquid electrostatic application equipment for non ignitable liquid coating material, see EN 50348:2010 ;
—   electrostatic hand-held spraying equipment, see EN 50050 1:2013, EN 50050 2:2013 and EN 50050 3:2013 as well as prEN 50059:2021;
—   potential separation systems;
—   cleaning systems for spraying devices;
—   selection, installation and application of other electrical and non-electrical equipment in areas with explosion hazard, see EN 60079 14:2014 and EN 16985:2018;
—   quality assurance systems for electrostatic spraying equipment (see EN ISO/IEC 80079 34:2020, ZB.11).
1.7   This document is not applicable to equipment manufactured before the date of its publication as a European Standard.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16985:2019(Main)
Spray booths for organic coating material - Safety requirements
EN 16985:2018

This European Standard deals with all significant hazards, hazardous situations and hazardous events (see clause 4) relevant to spray booths for the application of organic liquid and powder coating materials, when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse.
NOTE 1   For classification of spray booths see clause 3.
NOTE 2   For elements of spray booths see clause 3.
Interfaces between spray booths and other equipment used in coating application are given in figure 1.
The specific significant risks related to the use of this machinery with foodstuff and pharmaceutical products are not dealt with in this standard.
This European Standard is not applicable to:
-   spraying areas (spaces for application of organic coating materials which are limited only by one side wall used for extraction of exhaust ventilation);
-   platforms attached to spray booths (e.g. for touch-up coating jobs);
-   the walls of spray booths, if they are parts of a building;
NOTE   national regulations may apply for the integration of walls into a spray booth.
-   flock booth (see EN 50223).
This European Standard is not applicable to machinery manufactured before the date of its publication as EN.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4619:2019(Main)
Driers for paints and varnishes (ISO 4619:2018)
EN ISO 4619:2018

This document specifies the requirements and the corresponding test methods for driers for paints,
varnishes and related products. It applies to driers in the solid or liquid form. It does not apply to
emulsifiable driers.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day