SIST EN 13446:2004
(Main)Wood-based panels - Determination of withdrawal capacity of fasteners
Wood-based panels - Determination of withdrawal capacity of fasteners
This European Standard specifies a test method for determining the withdrawal capacity of nails, screws and staples inserted into wood-based panels.
This test method can be used for any combination of fastener type and wood-based panel product.
NOTE This method differs from EN 320 which characterises fibreboards in terms of their resistance to the withdrawal load of only a single type of screw.
Holzwerkstoffe - Bestimmung des Haltevermögens von Verbindungsmitteln
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung des Haltevermögens von Nägeln, Schrauben und Klammern fest, die in Holzwerkstoffe eingetrieben wurden.
Dieses Prüfverfahren kann für jegliche Kombination von Verbindungsmittel mit einem Holzwerkstoff angewendet werden.
ANMERKUNG Dieses Verfahren weicht von EN 320 ab, die nur für den Ausziehwiderstand einer bestimmten Schraube in Faserplatten gilt.
Panneaux a base de bois - Détermination de la capacité a l'arrachement d'éléments de fixation
La présente Norme européenne spécifie une méthode d'essai permettant de déterminer la capacité a l'arrachement des clous, vis et agrafes insérés dans des panneaux a base de bois.
Il est possible d'utiliser la présente méthode d'essai avec toutes les combinaisons de tout type d'éléments de fixation et de tout type de produits en panneaux a base de bois.
NOTE La présente méthode est différente de celle de l'EN 320 qui caractérise les panneaux en fibres de bois grâce a la détermination de leur résistance a la force d'arrachement d'un seul type de vis.
Lesne plošče – Ugotavljanje izvlečne sile žebljev, sponk in vijakov
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RYHolzwerkstoffe - Bestimmung des Haltevermögens von VerbindungsmittelnPanneaux a base de bois - Détermination de la capacité a l'arrachement d'éléments de fixationWood-based panels - Determination of withdrawal capacity of fasteners79.060.01Wood-based panels in generalICS:Ta slovenski standard je istoveten z:EN 13446:2002SIST EN 13446:2004en01-januar-2004SIST EN 13446:2004SLOVENSKI
STANDARD
SIST EN 13446:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13446May 2002ICS 79.060.01English versionWood-based panels - Determination of withdrawal capacity offastenersPanneaux à base de bois - Détermination de la capacité àl'arrachement d'éléments de fixationHolzwerkstoffe - Bestimmung des Haltevermögens vonVerbindungsmittelnThis European Standard was approved by CEN on 25 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13446:2002 ESIST EN 13446:2004
EN 13446:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Symbols.44.1Fastener characteristic.44.2Test characteristics.45Principle.56Apparatus.56.1Testing machine.56.2Grip.56.3Test jig.56.4Measuring instrument.66.5Conditioning equipment.67Test pieces.67.1Sampling.67.2Dimensions.77.3Conditioning.77.4Insertion of fasteners.78Test procedure.88.1Thickness and density.88.2Fastener penetration.88.3Application of load.88.4Measurement of maximum load.89Expression of result.810Test report.9Bibliography.10SIST EN 13446:2004
EN 13446:2002 (E)3ForewordThis document EN 13446:2002 has been prepared by Technical Committee CEN/TC 112 “Wood-based panels”,the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.The standard is partly based EN 1382.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13446:2004
EN 13446:2002 (E)41 ScopeThis European Standard specifies a test method for determining the withdrawal capacity of nails, screws andstaples inserted into wood-based panels.This test method can be used for any combination of fastener type and wood-based panel product.NOTEThis method differs from EN 320 which characterises fibreboards in terms of their resistance to the withdrawal loadof only a single type of screw.2 Normative referencesThis Euro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.