iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60939-3:2016/AC:2018

(Corrigendum)

Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate (IEC 60939-3:2015/COR2:2018)

Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate (IEC 60939-3:2015/COR2:2018)

IEC - Corrected version

Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sind (IEC 60939-3:2015/COR2:2018)

Filtres passifs d’antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont appropriés (IEC 60939-3:2015/COR2:2018)

Pasivni filtri za dušenje elektromagnetnega motenja - 3. del: Pasivni filtri, za katere varnostni preskusi ustrezajo - Popravek AC (IEC 60939-3:2015/COR2:2018)

General Information

Status
Published
Publication Date
27-Sep-2018
ICS
31.160 - Electric filters
Technical Committee
I11 - Imaginarni 11
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Sep-2018
Due Date
12-Nov-2018
Completion Date
28-Sep-2018
Ref Project
EN 60939-3:2015/AC:2018-08 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

Relations

Corrects
SIST EN 60939-3:2016 - Passive Filter Units For Electromagnetic Interference Suppression - Part 3: Standard for passive filter units for which safety tests are appropriate
Effective Date
22-May-2018
Revised
SIST EN IEC 60939-3:2024 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate (IEC 60939-3:2024)
Effective Date
10-May-2022

Buy Standard

EN 60939-3:2016/AC:2018EN 60939-3:2016/AC:2018
PreviousNext
Corrigendum
EN 60939-3:2016/AC:2018
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pasivni filtri za dušenje elektromagnetnega motenja - 3. del: Pasivni filtri, za katere varnostni preskusi ustrezajo - Popravek AC (IEC 60939-3:2015/COR2:2018)Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sind (IEC 60939-3:2015/COR2:2018)Filtres passifs d’antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont
appropriés (IEC 60939-3:2015/COR2:2018)Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate (IEC 60939-3:2015/COR2:2018)31.160Electric filtersICS:Ta slovenski standard je istoveten z:EN 60939-3:2015/AC:2018-08SIST EN 60939-3:2016/AC:2018en01-november-2018SIST EN 60939-3:2016/AC:2018SLOVENSKI
STANDARD



SIST EN 60939-3:2016/AC:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 60939-3:2015/AC:2018-08
August 2018
ICS 31.160 English Version
Passive filter units for electromagnetic interference suppression -Part 3: Passive filter units for which safety tests are appropriate(IEC 60939-3:2015/COR2:2018)
Filtres passifs d'antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont
appropriés (IEC 60939-3:2015/COR2:2018)
Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sind (IEC 60939-3:2015/COR2:2018) This corrigendum becomes effective on 31 August 2018 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60939-3:2015/AC:2018-08 ESIST EN 60939-3:2016/AC:2018



EN 60939-3:2015/AC:2018-08
Endorsement notice
The text of the corri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60939-2:2005/A1:2024(Amendment)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements (IEC 60939-2:2005/AMD1:2023)
EN 60939-2:2005/A1:2023
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60939-3:2016/AC:2016(Corrigendum)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
EN 60939-3:2015/AC:2016-04

IEC corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60939-3:2016(Main)
Passive Filter Units For Electromagnetic Interference Suppression - Part 3: Standard for passive filter units for which safety tests are appropriate
EN 60939-3:2015

This specification covers passive filters used to attenuate unwanted radio-frequency signals
(such as noise or interference) generated from electromagnetic sources.
Both single and multi-channel filters within one enclosure or which are built on a printed
circuit board forming a compact entity are included within the scope of this specification.
Filters constructed of capacitive elements where the inductance is inherent in the construction
of the filter are within the scope of this specification. Similarly, filters constructed of inductive
elements where the capacitance is inherent in the construction of the filter are also within the
scope of this specification. It is up to the manufacturer to state whether a given component is
to be designed as a capacitor, an inductor or a filter. Filters can include also other
components like resistors and/or varistors or similar components
This specification applies to passive filter units for electromagnetic interference suppression
for which safety tests are appropriate. This implies that filters specified according to this
specification will either be connected to mains supplies, when compliance with the mandatory
tests of Table 3 is necessary, or used in other circuit positions where the equipment
specification prescribes that some or all of these safety tests are required.
This specification applies to passive filter units, which will be connected to an a.c. mains or
other supply (d.c. or a.c.) with a nominal voltage not exceeding 1 000 V a.c., with a nominal
frequency not exceeding 400 Hz, or 1 500 V d.c.
NOTE For a.c. use, IEC 60384-14 applies to capacitors which will be connected to a.c. mains with a nominal
frequency not exceeding 100 Hz.
This specification covers appliance filters (US) but does not cover facility filters, cordconnected
filters or direct plug-in filters. These other filters will be covered by another
sectional specification.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60862-1:2016(Main)
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
EN 60862-1:2015

This part of IEC 60862 specifies the methods of test and general requirements for SAW filters
of assessed quality using either capability approval or qualification approval procedures.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60862-2:2012(Main)
Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guide to the use
EN 60862-2:2012

This part of IEC 60862 gives practical guidance on the use of SAW filters which are used in telecommunications, measuring equipment, radar systems and consumer products. IEC 60862-1 should be referred to for general information, standard values and test conditions. SAW filters are now widely used in a variety of applications such as TV, satellite communications, optical fibre communications, mobile communications and so on. While these SAW filters have various specifications, many of them can be classified within a few fundamental categories. This part of IEC 60862 includes various kinds of filter configuration, of which the operating frequency range is from approximately 10 MHz to 3 GHz and the relative bandwidth is about 0,02 % to 50 % of the centre frequency. It is not the aim of this standard to explain theory, nor to attempt to cover all the eventualities which may arise in practical circumstances. This standard draws attention to some of the more fundamental questions, which should be considered by the user before he places an order for a SAW filter for a new application. Such a procedure will be the user's insurance against unsatisfactory performance. Standard specifications, given in IEC 60862 series, and national specifications or detail specifications issued by manufacturers, define the available combinations of nominal frequency, pass bandwidth, ripple, shape factor, terminating impedance, etc. These specifications are compiled to include a wide range of SAW filters with standardized performances. It cannot be over-emphasized that the user should, wherever possible, select his SAW filters from these specifications, when available, even if it may lead to making small modifications to his circuit to enable standard filters to be used. This applies particularly to the selection of the nominal frequency.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60939-1:2010
Passive filter units for electromagnetic interference suppression - Part 1: Generic specification (IEC 60939-1:2010)
EN 60939-1:2010

This generic specification relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. Filters constructed of capacitive elements where the inductance is inherent in the construction of the filter are within the scope of this specification. Similarly, filters constructed of inductive elements where the capacitance is inherent in the construction of the filter are also within the scope of this generic specification. The manufacturer should state whether a given component is to be designed as a capacitor, an inductor or a filter. The filter units within the scope of this generic specification are further distinguished as those for which safety tests are appropriate (e.g. those connected to mains supplies) and those for which such tests are not appropriate. A separate sectional specification covers the passive filter units for which safety tests are appropriate. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60939-3:2024(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate (IEC 60939-3:2024)
EN IEC 60939-3:2024

IEC 60939-3:2024 is available as IEC 60939-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60939-3:2024 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this document. This document applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this document will either be connected to mains supplies, when compliance with the mandatory tests of Table B.1 is necessary, or used in other circuit positions where the equipment specification specifies that some or all of these safety tests are required. This document applies to passive filter units, which will be connected to an AC mains or other supply (DC or AC) with a nominal voltage not exceeding 1 000 V AC, with a nominal frequency not exceeding 400 Hz, or 1 500 V DC. Note: For AC use, IEC 60384-14 applies to capacitors which will be connected to AC mains with a nominal frequency not exceeding 100 Hz. This document covers appliance filters (US) but does not cover facility filters, cord-connected filters or direct plug-in filters. These other filters will be covered by another sectional specification.
This edition includes the following significant technical changes with respect to the previous edition:
a) separated clauses for safety and performance tests;
b) added note for use of multiple X capacitors bridging basic insulation in 3 phase filters;
c) characteristics and conditions to substitute X and Y capacitors are now described in a separate Subclause 4.1;
d) creepage and clearance tables updated and in line with the latest editions of IEC 60938-2 and IEC 60664-1;
e) allowing voltage measurement for inductance measurements (7.3);
f) added requirements for marking depending on remaining energy after disconnection;
g) added content of CTL DSH 2044:2016 for temperature test of IEC filters;
h) added note about temperature rise required specimens for safety testing;
i) changed index of capacitors in Annex A to avoid confusion between index name and capacitor class;
j) moved tests from group 1A to 2. Now, samples in group 1A need to be submitted without potting;
k) revision of all parts of the document has taken place based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents. Annex X contains all cross-references of changes in clause/subclause numbers.

  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60939-2:2005/A1:2024(Amendment)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements (IEC 60939-2:2005/AMD1:2023)
EN 60939-2:2005/A1:2023
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50065-4-4:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
EN 50065-4-4:2023

This standard applies to impedance filters in a mains communication system intended for utility networks or household and similar fixed installation including residential, commercial and light industrial buildings. These filters are used to set a suitable impedance, in the nominal frequency range of the mains signalling system, at any point of the low voltage mains network where a low impedance equipment is connected, in order to allow reliable operation of mains signalling system. Impedance filters can be used either in utility or consumer networks. They may also be used in conjunction with incoming filters and segmentation filters.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50065-4-3:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-3: Low voltage decoupling filter - Incoming filter
EN 50065-4-3:2023

This standard applies to incoming filters used to control the coupling of signals between the utility area and the consumer area. The standard defines: the minimum impedance in the relevant frequency bands at both Utility port and Consumer port, the minimum attenuation of unwanted signals transmitted from the utility side to the consumer side and vice versa. This standard applies to incoming filters designed for single or multiphase installations.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day