SIST EN 3733-108:2008
(Main)Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard
This standard specifies the characteristics of cable support boots for single channel fibre optic plug and receptacle connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 °C.
Connector interface dimensions, table of tests and qualification approval requirements are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.
Luft- und Raumfahrt - Optischer Rundsteckverbinder einpolig Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 108: Kabelzugentlastung - Produktnorm
Diese Norm legt die Eigenschaften von Kabeltüllen für einpolige freie und feste LWL-Steckverbinder für
einadrige optische Kabel nach EN 4532 zur Anwendung in der Luft- und Raumfahrt, Betriebstemperatur bis
150 °C, fest.
Die Maße des Steckgesichts, eine Tabelle mit Prüfungen sowie Anforderungen für die Bauartzulassung sind
in den Technischen Lieferbedingungen EN 3733-001 enthalten. EN 3733-002, Übersicht über die Produktnormen,
enthält ein Verzeichnis der Bauarten, ihre Kodierung und zulässige Bauteilekombinationen.
Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 108 : Manchon de protection - Norme de produit
Aeronavtika - Konektor, optični, okrogli, enokanalni, priključen s samozaklepnim obročkom, stalna delovna temperatura do 150 °C - 108. del: Obojka za kabel - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 25-May-2008
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 09-May-2008
- Due Date
- 14-Jul-2008
- Completion Date
- 26-May-2008
Overview
SIST EN 3733-108:2008 is the CEN product standard that defines the characteristics of cable support boots used with aerospace series, single-channel circular optical connectors coupled by a self-locking ring. The standard covers boots intended for single-core optical cable in accordance with EN 4532 and for continuous operation up to 150 °C.
This part (Part 108) focuses on physical characteristics, materials and application combinations rather than interface test tables or qualification procedures, which are referenced in the technical specification EN 3733-001.
Key Topics
- Scope and purpose: Specification of cable support boots for single-channel fibre optic plug and receptacle connectors in aerospace applications (operational temperature up to 150 °C).
- Materials: Boots are specified to be made of fluorosilicone, selected for high-temperature resistance and compatibility with aerospace environments.
- Dimensions and mass: Dimensions are given graphically (Figures 1 and 2) in millimetres; the maximum mass is 1.2 g. Either illustrated boot variant may be used.
- Application combinations: Supplied as integral parts of connector products conforming to EN 3733-003, EN 3733-004, EN 3733-005 and EN 3733-006; also available as deliverable spare parts.
- Designation and marking: Example designations are provided (e.g., EN3733-108B). Marking is specified as not applicable for this component.
- Qualification: The cable support boot is qualified as part of the complete connector assembly when the assembly is tested to the qualification requirements specified in EN 3733-001 and the related product standards.
Applications
This product standard is intended for engineers, procurement specialists and quality teams working with aerospace optical interconnects. Typical practical uses include:
- Strain relief and cable routing for single-core fibre optic connectors in aircraft and space systems.
- Replacement and spare part specification for connector assemblies built to EN 3733 product standards.
- Design guidance when integrating EN 4532 single-core optical cable into circular optical connectors that must tolerate continuous service temperatures up to 150 °C.
Benefits of following SIST EN 3733-108:2008:
- Ensures component compatibility with established EN 3733 product family.
- Specifies material and mass limits to support predictable mechanical and thermal behaviour.
- Simplifies procurement by providing a standard designation and clear application combinations.
Related Standards
- EN 3733-001 - Technical specification (connector interfaces, tests, qualification requirements)
- EN 3733-002 - List of product standards (product types, codification and combinations)
- EN 3733-003 / EN 3733-004 / EN 3733-005 / EN 3733-006 - Product standards for plugs and receptacles that use this boot
- EN 4532 - Aerospace series single-core optical cable specification
- EN 2591-100 - Test methods (elements of electrical and optical connection)
For implementation, reference the figures and notes within SIST EN 3733-108:2008 for exact dimensioning, and use EN 3733-001 for qualification and testing when incorporating the boot into assemblies.
Frequently Asked Questions
SIST EN 3733-108:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard". This standard covers: This standard specifies the characteristics of cable support boots for single channel fibre optic plug and receptacle connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 °C. Connector interface dimensions, table of tests and qualification approval requirements are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.
This standard specifies the characteristics of cable support boots for single channel fibre optic plug and receptacle connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 °C. Connector interface dimensions, table of tests and qualification approval requirements are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.
SIST EN 3733-108:2008 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3733-108:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standardSérie aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 108 : Manchon de protection - Norme de produitLuft- und Raumfahrt - Optischer Rundsteckverbinder einpolig Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 108: Kabelzugentlastung - Produktnorm49.060Aerospace electric equipment and systemsICS:SIST EN 3733-108:2008enTa slovenski standard je istoveten z:EN 3733-108:200801-julij-2008SIST EN 3733-108:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3733-108
April 2008 ICS 49.060 English Version
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard
Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 108 : Manchon de protection - Norme de produit
Luft- und Raumfahrt - Optischer Rundsteckverbinder einpolig Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 108: Kabelzugentlastung - Produktnorm This European Standard was approved by CEN on 19 January 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3733-108:2008: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...