SIST EN ISO 22721:2023
(Main)Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2023)
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2023)
This document specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for use in underground mines and disposed on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183-1. This document does not include requirements for plastics covers. These are agreed upon by the manufacturer and purchaser, taking into account the type of plastics to be used. Related items that are not requirements of this document, but which it is recommended be agreed upon by the manufacturer and purchaser, are included in Annex A. Details recommended to be supplied by the purchaser of belting with an enquiry are given in Annex B. The ability of a belt to run straight cannot be assessed until the belt is installed. Requirements for this are, therefore, outside the scope of this document; nevertheless, recommendations for lateral drift are
given in Annex C.
Attention is drawn to local regulations for safety which might be in place where the belts are to be used.
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-Deckplatten für Anwendungen unter Tage (ISO 22721:2023)
Dieses Dokument legt Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-Deckplatten für Anwendungen in untertätigen Bergwerken und auf geraden oder gemuldeten Rollen fest. Es gilt nicht für leichte Fördergurte nach ISO 21183 1.
Dieses Dokument enthält keine Anforderungen an Kunststoffabdeckungen. Diese werden zwischen dem Hersteller und dem Käufer unter Berücksichtigung der Art des zu verwendenden Kunststoffs vereinbart.
Verwandte Punkte, die keine Anforderungen dieses Dokuments darstellen, die aber zwischen Hersteller und Käufer vereinbart werden sollten, sind in Anhang A enthalten.
In Anhang B sind Einzelheiten enthalten, die der Käufer der Gurte zusammen mit einer Anfrage angeben sollte.
Die Fähigkeit eines Gurtes richtungsstabil zu laufen, kann nicht beurteilt werden, solange der Gurt nicht eingebaut ist. Diesbezügliche Anforderungen sind deshalb nicht Teil des Anwendungsbereiches dieses Dokuments, sind jedoch in Anhang C als Empfehlungen für die seitliche Drift aufgeführt.
Es wird auf lokale Sicherheitsvorschriften hingewiesen, die dort vorhanden sind, wo die Gurte verwendet werden.
Courroies transporteuses - Spécification pour courroies transporteuses à structure textile recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines (ISO 22721:2023)
L'ISO 22721:2007 spécifie les exigences relatives aux courroies transporteuses à structure textile recouvertes de caoutchouc ou de plastique pour utilisation dans les mines souterraines, disposées sur rouleaux plats ou en auge. Elle ne s'applique pas aux courroies transporteuses légères. L'ISO 22721:2007 n'inclut pas les exigences relatives aux revêtements plastiques.
Naprave za kontinuirni transport - Trakovi tračnih transportejev - Zahteve za tračne transportne trakove z gumeno ali plastično oblogo ter tekstilnim vložkom za podzemno rudarstvo (ISO 22721:2023)
Ta dokument določa zahteve za tračne transportne trakove z gumeno ali plastično oblogo ter tekstilnim vložkom za uporabo v podzemnem rudarstvu na ravnih ali koritastih tleh. Ne uporablja se za lahke trakove tračnih transporterjev iz standarda ISO 21183-1. Dokument ne vključuje zahtev za plastične obloge. O tem se dogovorita proizvajalec in kupec ob upoštevanju vrste plastike, ki bo uporabljena. Povezani elementi, ki niso zajeti v zahtevah tega dokumenta, vendar je priporočljivo, da se o njih dogovorita proizvajalec in kupec, so zajeti v dodatku A. Podrobnosti, za katere je priporočljivo, da jih kupec trakov priloži poizvedbi, so podane v dodatku B. Zmožnost traku, da deluje v ravni liniji, je mogoče oceniti šele po njegovi namestitvi. Zahteve v zvezi s tem zato ne spadajo na področje uporabe tega dokumenta; ne glede na to so v dodatku C podana priporočila za prečni odmik.
Opozoriti je treba na lokalne predpise glede varnosti, ki lahko veljajo na mestu uporabe trakov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22721:2023
01-december-2023
Naprave za kontinuirni transport - Trakovi tračnih transportejev - Zahteve za tračne
transportne trakove z gumeno ali plastično oblogo ter tekstilnim vložkom za
podzemno rudarstvo (ISO 22721:2023)
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile
construction for underground mining (ISO 22721:2023)
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-
Deckplatten für Anwendungen unter Tage (ISO 22721:2023)
Courroies transporteuses - Spécification pour courroies transporteuses à structure textile
recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines
(ISO 22721:2023)
Ta slovenski standard je istoveten z: EN ISO 22721:2023
ICS:
53.040.20 Deli za transporterje Components for conveyors
73.100.40 Oprema za vleko in dviganje Haulage and hoisting
equipment
SIST EN ISO 22721:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22721:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 22721:2023
EN ISO 22721
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 53.040.20 Supersedes EN ISO 22721:2007
English Version
Conveyor belts - Specification for rubber- or plastics-
covered conveyor belts of textile construction for
underground mining (ISO 22721:2023)
Courroies transporteuses - Spécification pour Fördergurte - Anforderungen an Textilfördergurte mit
courroies transporteuses à structure textile Gummi- oder Kunststoff-Deckplatten für
recouvertes de caoutchouc ou de plastique, pour Anwendungen unter Tage (ISO 22721:2023)
utilisation dans les mines souterraines (ISO
22721:2023)
This European Standard was approved by CEN on 27 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22721:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22721:2023
EN ISO 22721:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22721:2023
EN ISO 22721:2023 (E)
European foreword
This document (EN ISO 22721:2023) has been prepared by Technical Committee ISO/TC 41 "Pulleys
and belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts”
the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 22721:2007.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy
...
SLOVENSKI STANDARD
oSIST prEN ISO 22721:2022
01-december-2022
Naprave za kontinuirni transport - Trakovi tračnih transportejev - Zahteve za tračne
transportne trakove z gumeno ali plastično oblogo ter tekstilnim vložkom za
podzemno rudarstvo (ISO/DIS 22721:2022)
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile
construction for underground mining (ISO/DIS 22721:2022)
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-
Deckplatten für Anwendungen unter Tage (ISO/DIS 22721:2022)
Courroies transporteuses - Spécification pour courroies transporteuses à structure textile
recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines
(ISO/DIS 22721:2022)
Ta slovenski standard je istoveten z: prEN ISO 22721
ICS:
53.040.20 Deli za transporterje Components for conveyors
73.100.40 Oprema za vleko in dviganje Haulage and hoisting
equipment
oSIST prEN ISO 22721:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22721:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22721:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22721
ISO/TC 41/SC 3 Secretariat: SAC
Voting begins on: Voting terminates on:
2022-10-10 2023-01-02
Conveyor belts — Specification for rubber- or plastics-
covered conveyor belts of textile construction for
underground mining
Courroies transporteuses — Spécification pour courroies transporteuses à structure textile recouvertes de
caoutchouc ou de plastique, pour utilisation dans les mines souterraines
ICS: 73.100.40; 53.040.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 22721:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22721:2022
ISO/DIS 22721:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22721
ISO/TC 41/SC 3 Secretariat: SAC
Voting begins on: Voting terminates on:
Conveyor belts — Specification for rubber- or plastics-
covered conveyor belts of textile construction for
underground mining
Courroies transporteuses — Spécification pour courroies transporteuses à structure textile recouvertes de
caoutchouc ou de plastique, pour utilisation dans les mines souterraines
ICS: 73.100.40; 53.040.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 22721:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22721:2022
ISO/DIS 22721:2022(E)
Contents Page
Foreword .iv
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.