53.040.20 - Components for conveyors

ISO 433:2017 specifies the marking of conveyor belts, i.e.  
- the indications to be marked;
- the dimensions of the marks;
- the position of the marks.
ISO 433:2017 does not apply to light conveyor belts as described in ISO 21183‑1.

This document specifies test methods for determining the electrical resistances of light conveyor belts
according to ISO 21183-1. The resistances are surface resistance, volume resistance perpendicular
to the belt plane, and longitudinal and transverse volume resistance parallel to the belt plane. This
document also specifies two test methods for determining the surface resistivity and the volume
resistivity.

This European Standard describes a method of test to determine the propensity of a conveyor belt to generate heat flame or glow when held stationary under a given tension, in surface contact around a rotating driven steel drum.
Means of varying the belt tension are described.
NOTE   For certain belt types, due to their construction, it may not be possible to conduct this test due to the inability of the belt to comply with the requirements of 6.2.3.

This document establishes a list of equivalent terms relating to light conveyor belts.
NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this
document gives the equivalent terms in German, Spanish, Italian and Japanese; these are published under the
responsibility of the member bodies for Germany (DIN), Spain (AENOR), Italy (UNI) and Japanese (JISC). However,
only the terms given in the official languages can be considered as ISO terms.

ISO 20238:2018 specifies a method of testing to determine the propensity of a conveyor belt to generate heat flame or glow when held stationary, under a given tension, in surface contact around a rotating driven steel drum.
ISO 20238:2018 describes means of varying the conveyor belt tension.
NOTE For conveyor belts containing steel reinforcement, it may not be possible to conduct this test in full due to the inability of the conveyor belt to comply with the requirements of 7.2. In this case, p...view more

This document establishes a list of equivalent terms relating to light conveyor belts.
NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German, Spanish, Italian and Japanese; these are published under the responsibility of the member bodies for Germany (DIN), Spain (AENOR), Italy (UNI) and Japanese (JISC). However, only the terms given in the official languages can be considered as ISO terms.

This document establishes a list of equivalent terms relating to light conveyor belts. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German, Spanish, Italian and Japanese; these are published under the responsibility of the member bodies for Germany (DIN), Spain (AENOR), Italy (UNI) and Japanese (JISC). However, only the terms given in the official languages can be considered as ISO terms.

This document specifies three methods for the measurement of total belt thickness and the thickness of
covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the
measurement of both total belt thickness and cover thickness.
Method B (optical method) is intended for the measurement of cover thickness only. It is not suitable if
there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.

This document specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts.
Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness.
Method B (optical method) is intended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.

This document specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts. Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness. Method B (optical method) is intended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.

This document specifies a method of test for the measurement of the propagation resistance of an initial
tear in textile conveyor belts, either in full thickness or of the carcass only.
This test is intended for application to textile belts in installations where there is a risk of longitudinal
tearing.

ISO 20238:2018 specifies a method of testing to determine the propensity of a conveyor belt to generate heat flame or glow when held stationary, under a given tension, in surface contact around a rotating driven steel drum. ISO 20238:2018 describes means of varying the conveyor belt tension. NOTE For conveyor belts containing steel reinforcement, it may not be possible to conduct this test in full due to the inability of the conveyor belt to comply with the requirements of 7.2. In this case, pre...view more

ISO 505:2017 specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only.
This test is intended for application to textile belts in installations where there is a risk of longitudinal tearing.

ISO 433:2017 specifies the marking of conveyor belts, i.e. - the indications to be marked; - the dimensions of the marks; - the position of the marks. ISO 433:2017 does not apply to light conveyor belts as described in ISO 21183‑1.

ISO 505:2017 specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only. This test is intended for application to textile belts in installations where there is a risk of longitudinal tearing.

This document specifies the performance and constructional requirements applicable to conveyor
belts for underground mining having steel cords in the longitudinal direction as reinforcement. The
requirements for design and construction apply to the design of single belts, as well as the design of
complete type series such as those covered in ISO 15236-2.
Steel cord belts in accordance with this document are intended for use underground in coal mines and
in other applications where the highe...view more

ISO 15236-3:2017 specifies the performance and constructional requirements applicable to conveyor belts for underground mining having steel cords in the longitudinal direction as reinforcement. The requirements for design and construction apply to the design of single belts, as well as the design of complete type series such as those covered in ISO 15236‑2.
Steel cord belts in accordance with this document are intended for use underground in coal mines and in other applications where the highes...view more

ISO 15236-3:2017 specifies the performance and constructional requirements applicable to conveyor belts for underground mining having steel cords in the longitudinal direction as reinforcement. The requirements for design and construction apply to the design of single belts, as well as the design of complete type series such as those covered in ISO 15236‑2. Steel cord belts in accordance with this document are intended for use underground in coal mines and in other applications where the highest...view more