SIST EN 62018:2005
(Main)Power consumption of information technology equipment - Measurement methods
Power consumption of information technology equipment - Measurement methods
This International Standard defines the test methods used to measure power consumption of information technology equipment (ITE) under various modes of operation for the purpose of energy management. ITE includes the products identified in the scope of EN 60950-1.
Energieverbrauch von Einrichtungen der Informationstechnik - Messverfahren
Consommation d'énergie des matériels de traitement de l'information - Méthodes de mesure
La présente Norme internationale définit les méthodes d'essai utilisées pour mesurer la consommation d'énergie des appareils de traitement de l'information (ATI) dans différents modes de fonctionnement, dans le but de la gestion de l'énergie. Les appareils de traite-ment de l'information comprennent les produits identifiés dans le domaine d'application de la EN 60950-1.
Poraba energije pri opremi za informacijsko tehnologijo – Merilne metode (IEC 62018:2003)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62018:2005
01-november-2005
Poraba energije pri opremi za informacijsko tehnologijo – Merilne metode (IEC
62018:2003)
Power consumption of information technology equipment - Measurement methods
Energieverbrauch von Einrichtungen der Informationstechnik - Messverfahren
Consommation d'énergie des matériels de traitement de l'information - Méthodes de
mesure
Ta slovenski standard je istoveten z: EN 62018:2003
ICS:
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
SIST EN 62018:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62018:2005
---------------------- Page: 2 ----------------------
SIST EN 62018:2005
EUROPEAN STANDARD EN 62018
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003
ICS 35.020; 35.260
English version
Power consumption of information technology equipment –
Measurement methods
(IEC 62018:2003)
Consommation d'énergie des matériels Energieverbrauch von Einrichtungen
de traitement de l'information – der Informationstechnik –
Méthodes de mesure Messverfahren
(CEI 62018:2003) (IEC 62018:2003)
This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62018:2003 E
---------------------- Page: 3 ----------------------
SIST EN 62018:2005
EN 62018:2003 - 2 -
Foreword
The text of document 108/65/FDIS, future edition 1 of IEC 62018, prepared by IEC TC 108, Safety of
electronic equipment within the field of audio/video, information technology and communication
technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62018 on 2003-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62018:2003 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 62018:2005
- 3 - EN 62018:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60950-1 - Information technology equipment - EN 60950-1 2001
(mod) Safety
Part 1: General requirements
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 62018:2005
---------------------- Page: 6 ----------------------
SIST EN 62018:2005
NORME CEI
INTERNATIONALE IEC
62018
INTERNATIONAL
Première édition
STANDARD
First edition
2003-06
Consommation d'énergie des matériels
de traitement de l'information –
Méthodes de mesure
Power consumption of information
technology equipment –
Measurement methods
IEC 2003 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
G
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 62018:2005
62018 IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .7
1 Scope . 9
2 Normative references. 9
3 Terms and definitions. 9
4 Test procedure.9
4.1 Measuring equipment. 9
4.2 Configuration .11
4.3 Temperature and humidity.11
4.4 Power source for test .11
4.4.1 Frequency and waveform .11
4.4.2 Voltage .11
4.5 Power measurements .11
4.5.1 Full-on mode.11
4.5.2 Energy saving mode.11
5 Records of results of measurements .13
---------------------- Page: 8 ----------------------
SIST EN 62018:2005
62018 IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWER CONSUMPTION OF INFORMATION
TECHNOLOGY EQUIPMENT –
MEASUREMENT METHODS
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.