SIST-TS CLC/TS 62367:2005
(Main)Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)
Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)
This technical specification addresses the safety implications of having xDSL signals on circuits in equipment connected to a TELECOMMUNICATION NETWORK, and gives rules for dealing with such equipment in the context of the EN 60950 series
Sicherheitsaspekte für xDSL-Signale in Stromkreisen für den Anschluss an Telekommunikationsnetze (DSL: digitale Teilnehmerleitung)
Aspects de sécurité pour signaux xDSL sur circuits connectés aux réseaux de télécommunication (DSL: ligne d'abonné numérique)
This technical specification addresses the safety implications of having xDSL signals on circuits in equipment connected to a TELECOMMUNICATION NETWORK, and gives rules for dealing with such equipment in the context of the EN 60950 series
Varnostni vidiki za signale xDSL v tokokrogih za povezavo v telekomunikacijska omrežja (DSL: digitalne naročniške linije (digital subscriber line)) (IEC/TS 62367:2004)
General Information
This May Also Interest You
This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat-resisting alloy tubes. It is presupposed to be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a method of determining the attenuation variation of an optical cable during mechanical bending under load at the maximum and minimum operating temperatures.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat-resisting alloy wires. It is presupposed to be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
- Standard32 pagesEnglish languagesale 10% offe-Library read for×1 day
This part of IEC 62271 provides guidance to suppliers, manufacturers, users, and waste operators of high-voltage switchgear and controlgear as well as their assemblies having a rated voltage above 1 kV AC and 1,5 kV DC, together with their associated auxiliary equipment, on environmentally conscious design, and on assessing environmental impacts when used in systems. This document also gives guidance on effective communication of environmental information throughout the entire life cycle.
This document provides guidance on the process and general aspects to select UN sustainable development goals (UN sustainable development goals (SDG)), especially those dealing with health and environmental impacts and their assessments, represented respectively by:
• SDG 3-Good Health and Well-being;
• SDG 6-Clean Water and Sanitation;
• SDG 7-Affordable and Clean Energy;
• SDG 12-Responsible Consumption and Production;
• SDG 13-Climate Action;
• SDG 14-Life Below Water;
• SDG 15-Life on Land.
This document gives guidance on the process and general aspects to implement environmentally conscious product design (ECD) principles, as given in IEC 62430, essential
for high-voltage electrical power equipment and power control equipment.
This document gives guidance on executing the life cycle assessment (LCA) based on product category rules (PCR) in accordance with IEC 63366, ISO 14040 and ISO 14044 and on applying the Type III environmental declaration in accordance with ISO 14025, both for high-voltage switchgear and controlgear. This guidance provides standardized product specific rules (PSR) summarized as follows:
1) Common rules for the LCA process describing functional units, system boundaries, life cycle inventory analysis, scenarios, environmental impact categories;
2) Common rules for communicating information about the presence of regulated substances and the materials contained in the product, according to IEC 62474;
3) Common rules for communicating information about the end-of-life treatment of the product including material efficiency.
This document does not address the environmental declaration programme, however it can be used by program operators.
This document focuses on describing the LCA process referring to the functional unit, system boundary, scenarios, etc.
Owing to variability of influencing factors, such as flows, allocations, not balanced and timestable energy mix under different programmes, equipment customization, durability related to environmental conditions, it is not possible to compare two similar high-voltage switchgear and controlgear analysed in different contexts.
This document does not address by-products from arcing which are generated in sufficiently small quantities such that their environmental impact can be neglected. Any by-product generated by arcing during the use of equipment is strongly dependent on operating conditions and cannot a priori be qualified nor quantified. However, they are not expected to be released in air and will be managed at end-of-life by a dedicated process.
EXAMPLE
During the use of high-voltage switchgear and controlgear the handlings of normally arced gas are covered by IEC 62271-4. When the volume of gaseous by-product is below 1 % of normally arced gas, it is not considered compared to the cut-off rules specified in this document. The scenarios related to the system boundary do not take into account leakages from failures except if an agreement is reached on this between user and manufacturer (see Table 7, item h).
Power transformers, low-voltage switchgear and controlgear, and the interconnections with such equipment are not covered by this document. Therefore, assemblies according to IEC 62271-202 or IEC 62271-212 comprising any of the above equipment are not within the scope of this document.
This document supports material efficiency for circular economy. However, one of the major issues related to remanufacturing is the consideration of used parts
- Technical specification112 pagesEnglish languagesale 10% offe-Library read for×1 day
This document is a part of a package of standards: EN 12080, EN 12081, EN 12082-1 and EN 12082-2.
This document specifies the principles and methods for deployment of the system of axlebox rolling bearing(s), housing, seal(s) and grease, required for reliable operation of trains on European networks.
It covers the conformity assessment with respect to design requirements on the rolling bearing(s) according EN 12080 and grease according EN 12081 as well as the performance of (rig) tests according to EN 12082-1. This document is historically developed for outboard applications with rotating inner rings, but can be used for vehicles with inboard bearing arrangements with rotation inner rings.
The present document describes the complete deployment procedure for new axleboxes and it specifies the necessary type and extent of testing. For certain cases and based on a documented risk assessment, a reduced deployment procedure is described.
This document only applies to axleboxes equipped with rolling bearings and greases according to EN 12080 and EN 12081.
It is not within the scope of EN 12082-2 to specify the technical details of the testing procedures, these are covered by EN 12082-1.
It is not within the scope of EN 12082-2 to define the validation procedure of box housings, sleeves or coves from a structural point of view. The relevance of these parts in the scope of this document is limited to the interaction with the axle box rolling bearing with respect to the required service.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Nov-2024
- 22-Dec-2025
- 45.040
- 2016/797/EU
- M/591
- IŽNP
- Amendment12 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Jun-2024
- 22-Dec-2025
- 25.100.01
- 25.140.20
- 2006/42/EC
- M/396
- VGA
This document is a part of a package of standards: EN 12080, EN 12081, EN 12082-1 and EN 12082-2. This document specifies the quality parameters of axlebox rolling bearings supporting the load of the vehicle, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also specifies methods for quality assurance and non-destructive testing of the products.
- Standard51 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies the conditions for the determination of the tensile creep deformation and failure behaviour of single filaments of ceramic fibres at high temperature and under test conditions that prevent changes to the material as a result of chemical reaction with the test environment.
This document applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strains to fracture less than or equal to 5 %.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see Clause 2).
- Standard8 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 61169-74:2025, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for series HN RF coaxial connectors with screw coupling with a characteristic impedance of 50 Ω.
This document prescribes mating face dimensions for high performance connectors (grade 2), dimensional details of standard test connectors (grade 0), gauging information and tests selected from IEC 61169-1, applicable to all Detail Specifications relating to series HN RF connectors.
This document indicates recommended performance characteristics which are considered when writing a Detail Specification and it covers test schedules and inspection requirements for assessment levels M and H.
The series HN connectors are intended to be used in microwave transmission systems and can be connected with all kinds of RF cables and microstrips. The operating frequency is up to 6 GHz.
- Standard29 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...