SIST EN 302 288-2 V1.3.2:2009
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices - Road Transport and Traffic Telematics (RTTT) - Short range radar equipment operating in the 24 GHz range - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document applies to Short Range Devices (SRDs) in Road Transport and Traffic Telematics (RTTT) systems as described in the scope of EN 302 288-1 [1]:
- with an integral antenna;
- for ultra low power motion and distance monitoring radars for mobile applications only;
- operating in the 22 GHz to 26,65 GHz frequency range.
The applicability of the present document covers only the 24 GHz Short Range Radar (SRR) for road vehicles. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. NOTE: Member States of the European Union are required to prohibit the taking into service of equipment covered by the present document after a date defined in Commission Decision 2005/50/EC [i.4]. The present document covers transmitters intended to operate in a temporary frequency designation under the 24 GHz ECC decision ECC/DEC/(04)10 [i.5]. The application is also subject to the EU Commission decision on 24 GHz SRR EC 2005/50/EC [i.4]. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". The present document responds to the EC mandate M/329 [i.6] for Harmonized Standards covering Ultrawide band (UWB) applications.
- Status
- Published
- Publication Date
- 02-Mar-2009
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 17-Feb-2009
- Due Date
- 24-Apr-2009
- Completion Date
- 03-Mar-2009
- Mandate
- M/363
Buy Documents
ETSI EN 302 288-2 V1.3.2 (2008-09) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 288-2 V1.3.2 (2009-01) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
SIST EN 302 288-2 V1.3.2:2009 is the SIST adoption of the ETSI Harmonized European Standard for short range radar equipment used in Road Transport and Traffic Telematics (RTTT). It specifies the radio spectrum and electromagnetic compatibility requirements for 24 GHz Short Range Radar (SRR) equipment with an integral antenna, intended for mobile automotive use, so manufacturers and test laboratories can assess conformity under the R&TTE Directive.
What does SIST EN 302 288-2 V1.3.2:2009 specify?
SIST EN 302 288-2 V1.3.2:2009 applies to Short Range Devices (SRDs) in RTTT systems with an integral antenna, for ultra low power motion and distance monitoring radars for mobile applications only, operating in the 22 GHz to 26,65 GHz range. It covers only 24 GHz SRR for road vehicles and is tied to the article 3.2 essential requirement on efficient spectrum use and avoidance of harmful interference.
The document is organized as a short harmonized EN with:
- Scope, references, definitions and abbreviations
- Technical requirements specifications
- Testing for compliance with technical requirements
- Annex A harmonized requirements and test specifications table
- Annex B official-language EN title
- Annex C bibliography
What are the key requirements of SIST EN 302 288-2 V1.3.2:2009?
SIST EN 302 288-2 V1.3.2:2009 sets the compliance points that matter for spectrum use, unwanted emissions and test reporting. In practice, it tells a provider what has to be declared, measured and recorded to show that a 24 GHz automotive radar fits the harmonized limits.
- Declared environmental profile - Clause 4.1.1 requires the provider to declare the operational environmental profile, and the equipment has to comply within those boundary limits. This matters because the test conditions have to match the intended use.
- Transmit frequency and power in 22 GHz to 26,65 GHz - Clause 4.2.1.1 controls the permitted operating range, maximum radiated average power density and maximum radiated peak power density by reference to EN 302 288-1. This is the core spectrum-shaping part of the standard.
- Transmit limits in 24,050 GHz to 24,250 GHz - Clause 4.2.1.2 sets the permitted operating range and equivalent isotropically radiated power (e.i.r.p.) limits for the main 24 GHz band. This is the band most directly associated with road-vehicle SRR.
- Vertical plane emissions - Clause 4.2.1.3 limits emissions in the 23,6 GHz to 24,0 GHz range. That helps control radiation pattern effects that can increase interference risk in real installations.
- Unwanted emissions - Clause 4.2.1.4 covers transmitter spurious and out-of-band emissions, and clause 4.2.2.1 covers receiver spurious emissions. These checks matter because radios can interfere outside their intended band even when the main signal is within limits.
- Installation requirements - Clause 4.2.3 applies the installation requirements from EN 302 288-1, Annex D. This is important where the final vehicle installation affects compliance.
- Testing and uncertainty - Clause 5 requires testing at representative points within the declared environmental profile, and clause 5.3 requires measurement uncertainty to be reported in the test report. The uncertainty figures are calculated using TR 100 028, so test reports can be compared consistently.
Annex A is especially important because it links each requirement to its test specification and marks whether the test is part of the Essential Radio Test Suite.
What terms does SIST EN 302 288-2 V1.3.2:2009 define?
- Short Range Devices (SRDs) - Radio devices intended for short-distance operation within the scope of RTTT.
- Road Transport and Traffic Telematics (RTTT) - The transport and traffic context in which these short range radar devices are used.
- Short range radar (SRR) - The 24 GHz radar equipment covered by this standard for road vehicles.
- equivalent isotropically radiated power (e.i.r.p.) - A way to express radiated transmitter power against a reference isotropic radiator.
- environmental profile - The declared range of environmental conditions in which the equipment has to meet the technical requirements.
- Essential Radio Test Suite - The test set identified in Annex A as essential for demonstrating conformity.
- Ultrawide band (UWB) - The wider application family mentioned in the mandate context for this harmonized standard.
Who uses SIST EN 302 288-2 V1.3.2:2009?
SIST EN 302 288-2 V1.3.2:2009 is used by manufacturers and suppliers of automotive short range radar equipment, test laboratories, and compliance or quality teams assessing radio performance. It is also useful for buyers and technical reviewers who need to check whether a 24 GHz radar product is designed for the RTTT use case and the harmonized article 3.2 test approach.
Which standards are used with SIST EN 302 288-2 V1.3.2:2009?
- ETSI EN 302 288-1 V1.4.1 - Provides the technical requirements and methods of measurement that this part references for limits, symbols and test procedures.
- ETSI TR 100 028 V1.4.1 (all parts) - Provides the uncertainty calculation approach used for measurement uncertainty reporting.
What does the SIST EN 302 288-2 V1.3.2:2009 document contain?
SIST EN 302 288-2 V1.3.2:2009 contains the scope, references, definitions, technical requirements, compliance test suites and the harmonized requirements table in Annex A. Clause 5 covers environmental conditions for testing, transmitter and receiver test suites, installation checks, and interpretation of results. Annex A cross-references each requirement to its test specification and identifies whether the test is essential or other. Annex B gives the EN title in the official languages, and Annex C lists background references for EMC, low-voltage equipment and SRD use.
Buy Documents
ETSI EN 302 288-2 V1.3.2 (2008-09) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 288-2 V1.3.2 (2009-01) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
NYCE
Mexican standards and certification body.
ANCE
Mexican certification and testing association.
Sponsored listings
Frequently Asked Questions
SIST EN 302 288-2 V1.3.2:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices - Road Transport and Traffic Telematics (RTTT) - Short range radar equipment operating in the 24 GHz range - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document applies to Short Range Devices (SRDs) in Road Transport and Traffic Telematics (RTTT) systems as described in the scope of EN 302 288-1 [1]: - with an integral antenna; - for ultra low power motion and distance monitoring radars for mobile applications only; - operating in the 22 GHz to 26,65 GHz frequency range. The applicability of the present document covers only the 24 GHz Short Range Radar (SRR) for road vehicles. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. NOTE: Member States of the European Union are required to prohibit the taking into service of equipment covered by the present document after a date defined in Commission Decision 2005/50/EC [i.4]. The present document covers transmitters intended to operate in a temporary frequency designation under the 24 GHz ECC decision ECC/DEC/(04)10 [i.5]. The application is also subject to the EU Commission decision on 24 GHz SRR EC 2005/50/EC [i.4]. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". The present document responds to the EC mandate M/329 [i.6] for Harmonized Standards covering Ultrawide band (UWB) applications.
The present document applies to Short Range Devices (SRDs) in Road Transport and Traffic Telematics (RTTT) systems as described in the scope of EN 302 288-1 [1]: - with an integral antenna; - for ultra low power motion and distance monitoring radars for mobile applications only; - operating in the 22 GHz to 26,65 GHz frequency range. The applicability of the present document covers only the 24 GHz Short Range Radar (SRR) for road vehicles. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. NOTE: Member States of the European Union are required to prohibit the taking into service of equipment covered by the present document after a date defined in Commission Decision 2005/50/EC [i.4]. The present document covers transmitters intended to operate in a temporary frequency designation under the 24 GHz ECC decision ECC/DEC/(04)10 [i.5]. The application is also subject to the EU Commission decision on 24 GHz SRR EC 2005/50/EC [i.4]. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". The present document responds to the EC mandate M/329 [i.6] for Harmonized Standards covering Ultrawide band (UWB) applications.
SIST EN 302 288-2 V1.3.2:2009 is classified under the following ICS (International Classification for Standards) categories: 33.060.99 - Other equipment for radiocommunications; 33.100.01 - Electromagnetic compatibility in general; 35.240.60 - IT applications in transport. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 288-2 V1.3.2:2009 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC; Standardization Mandates: M/363. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 288-2 V1.3.2:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI EN 302 288-2 V1.3.2 (2008-09)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices;
Road Transport and Traffic Telematics (RTTT);
Short range radar equipment operating in the 24 GHz range;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 Final draft ETSI EN 302 288-2 V1.3.2 (2008-09)
Reference
REN/ERM-TG31B-050-2
Keywords
radar, radio, regulation, RTTT, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI EN 302 288-2 V1.3.2 (2008-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental conditions . 7
4.1.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Limits for transmitters in the range from 22,0 GHz to 26,65 GHz . 7
4.2.1.1.1 Permitted range of operating frequencies . 7
4.2.1.1.2 Maximum radiated average power density (e.i.r.p.) . 7
4.2.1.1.3 Maximum radiated peak power density (e.i.r.p.) . 7
4.2.1.2 Limits for transmitters in the range from 24,050 GHz to 24,250 GHz . 7
4.2.1.2.1 Permitted range of operating frequencies . 7
4.2.1.2.2 Equivalent isotropically radiated power (e.i.r.p.) . 7
4.2.1.3 Vertical plane emission limits in the range from 23,6 GHz to 24,0 GHz . 7
4.2.1.4 Transmitter spurious and out-of-band emissions . 8
4.2.2 Receiver requirements . 8
4.2.2.1 Receiver spurious emissions . 8
4.2.3 Installation requirements . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Transmitters operating in the 22,0 GHz to 26,65 GHz band . 8
5.2.1.1.1 Permitted range of frequencies . 8
5.2.1.1.2 Maximum radiated average power density (e.i.r.p.) . 8
5.2.1.1.3 Maximum radiated peak power density (e.i.r.p.) . 8
5.2.1.2 Transmitters operating in the 24,050 GHz to 24,250 GHz band . 8
5.2.1.2.1 Permitted range of frequencies . 8
5.2.1.2.2 Equivalent isotropically radiated power (e.i.r.p.) . 8
5.2.1.3 Vertical plane transmitter emissions . 9
5.2.1.4 Transmitter spurious and out-of-band emissions . 9
5.2.2 Receiver test suites. 9
5.2.2.1 Receiver spurious emissions . 9
5.2.3 Installation requirements . 9
5.3 Interpretation of results and measurement uncertainty . 9
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 10
Annex B (informative): The EN title in the official languages . 12
Annex C (informative): Bibliography . 13
History . 14
ETSI
4 Final draft ETSI EN 302 288-2 V1.3.2 (2008-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards One-
step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices, Road Transport and Traffic Telematics (RTTT); Short range radar equipment
operating in the 24 GHz range, as identified below:
Part 1: "Technical requirements and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex .
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
5 Final draft ETSI EN 302 288-2 V1.3.2 (2008-09)
1 Scope
The present document applies to Short Range Devices (SRDs) in Road Transport and Traffic Telematics (RTTT)
systems as described in the scope of EN 302 288-1 [1]:
• with an integral antenna;
• for ultra low power motion and distance monitoring radars for mobile applications only;
• operating in the 22 GHz to 26,65 GHz frequency range.
The applicability of the present document covers only the 24 GHz Short Range Radar (SRR) for road vehicles. The
present document does not necessarily include all the characteristics which may be required by a user, nor does it
necessarily represent the optimum performance achievable.
NOTE: Member States of the European Union are required to prohibit the taking into service of equipment
covered by the present document after a date defined in Commission Decision 2005/50/EC [i.4].
The present document covers transmitters intended to operate in a temporary frequency designation under the 24 GHz
ECC decision ECC/DEC/(04)10 [i.5]. The application is also subject to the EU Commission decision on 24 GHz SRR
EC 2005/50/EC [i.4].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
The present document responds to the EC mandate M/329 [i.6] for Harmonized Standards covering Ultrawide band
(UWB) applications.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full networ
...
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices;
Road Transport and Traffic Telematics (RTTT);
Short range radar equipment operating in the 24 GHz range;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 288-2 V1.3.2 (2009-01)
Reference
REN/ERM-TG31B-050-2
Keywords
radar, radio, regulation, RTTT, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 288-2 V1.3.2 (2009-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 7
4.1 Environmental conditions . 7
4.1.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Limits for transmitters in the range from 22 GHz to 26,65 GHz . 7
4.2.1.1.1 Permitted range of operating frequencies . 7
4.2.1.1.2 Maximum radiated average power density (e.i.r.p.) . 7
4.2.1.1.3 Maximum radiated peak power density (e.i.r.p.) . 7
4.2.1.2 Limits for transmitters in the range from 24,050 GHz to 24,250 GHz . 7
4.2.1.2.1 Permitted range of operating frequencies . 7
4.2.1.2.2 Equivalent isotropically radiated power (e.i.r.p.) . 7
4.2.1.3 Vertical plane emission limits in the range from 23,6 GHz to 24,0 GHz . 7
4.2.1.4 Transmitter spurious and out-of-band emissions . 7
4.2.2 Receiver requirements . 8
4.2.2.1 Receiver spurious emissions . 8
4.2.3 Installation requirements . 8
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.2 Essential radio test suites . 8
5.2.1 Transmitter test suites . 8
5.2.1.1 Transmitters operating in the 22 GHz to 26,65 GHz band . 8
5.2.1.1.1 Permitted range of frequencies . 8
5.2.1.1.2 Maximum radiated average power density (e.i.r.p.) . 8
5.2.1.1.3 Maximum radiated peak power density (e.i.r.p.) . 8
5.2.1.2 Transmitters operating in the 24,050 GHz to 24,250 GHz band . 8
5.2.1.2.1 Permitted range of frequencies . 8
5.2.1.2.2 Equivalent isotropically radiated power (e.i.r.p.) . 8
5.2.1.3 Vertical plane transmitter emissions . 8
5.2.1.4 Transmitter spurious and out-of-band emissions . 9
5.2.2 Receiver test suites. 9
5.2.2.1 Receiver spurious emissions . 9
5.2.3 Installation requirements . 9
5.3 Interpretation of results and measurement uncertainty . 9
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 10
Annex B (informative): The EN title in the official languages . 12
Annex C (informative): Bibliography . 13
History . 14
ETSI
4 ETSI EN 302 288-2 V1.3.2 (2009-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices, Road Transport and Traffic Telematics (RTTT); Short range radar equipment
operating in the 24 GHz range, as identified below:
Part 1: "Technical requirements and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates
Date of adoption of this EN: 22 January 2009
Date of latest announcement of this EN (doa): 30 April 2009
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2009
Date of withdrawal of any conflicting National Standard (dow): 31 October 2010
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
5 ETSI EN 302 288-2 V1.3.2 (2009-01)
1 Scope
The present document applies to Short Range Devices (SRDs) in Road Transport and Traffic Telematics (RTTT)
systems as described in the scope of EN 302 288-1 [1]:
• with an integral antenna;
• for ultra low power motion and distance monitoring radars for mobile applications only;
• operating in the 22 GHz to 26,65 GHz frequency range.
The applicability of the present document covers only the 24 GHz Short Range Radar (SRR) for road vehicles. The
present document does not necessarily include all the characteristics which may be required by a user, nor does it
necessarily represent the optimum performance achievable.
NOTE: Member States of the European Union are required to prohibit the taking into service of equipment
covered by the present document after a date defined in Commission Decision 2005/50/EC [i.4].
The present document covers transmitters intended to operate in a temporary frequency designation under the 24 GHz
ECC decision ECC/DEC/(04)10 [i.5]. The application is also subject to the EU Commission decision on 24 GHz SRR
EC 2005/50/EC [i.4].
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
The present document responds to the EC mandate M/329 [i.6] for Harmonized Standards covering Ultrawide band
(UWB) applications.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publica
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices - Road Transport and Traffic Telematics (RTTT) - Short range radar equipment operating in the 24 GHz range - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and trade33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 302 288-2 Version 1.3.2SIST EN 302 288-2 V1.3.2:2009en01-april-2009SIST EN 302 288-2 V1.3.2:2009SLOVENSKI
STANDARD
ETSI ETSI EN 302 288-2 V1.3.2 (2009-01) 2
Reference REN/ERM-TG31B-050-2 Keywords radar, radio, regulation, RTTT, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 288-2 V1.3.2:2009
ETSI ETSI EN 302 288-2 V1.3.2 (2009-01) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Introduction . 4 1 Scope . 5 2 References . 5 2.1 Normative references . 5 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 6 3.1 Definitions . 6 3.2 Symbols . 6 3.3 Abbreviations . 6 4 Technical requirements specifications . 7 4.1 Environmental conditions . 7 4.1.1 Environmental profile . 7 4.2 Conformance requirements . 7 4.2.1 Transmitter requirements . 7 4.2.1.1 Limits for transmitters in the range from 22 GHz to 26,65 GHz . 7 4.2.1.1.1 Permitted range of operating frequencies . 7 4.2.1.1.2 Maximum radiated average power density (e.i.r.p.) . 7 4.2.1.1.3 Maximum radiated peak power density (e.i.r.p.) . 7 4.2.1.2 Limits for transmitters in the range from 24,050 GHz to 24,250 GHz . 7 4.2.1.2.1 Permitted range of operating frequencies . 7 4.2.1.2.2 Equivalent isotropically radiated power (e.i.r.p.) . 7 4.2.1.3 Vertical plane emission limits in the range from 23,6 GHz to 24,0 GHz . 7 4.2.1.4 Transmitter spurious and out-of-band emissions . 7 4.2.2 Receiver requirements . 8 4.2.2.1 Receiver spurious emissions . 8 4.2.3 Installation requirements . 8 5 Testing for compliance with technical requirements . 8 5.1 Environmental conditions for testing . 8 5.2 Essential radio test suites . 8 5.2.1 Transmitter test suites . 8 5.2.1.1 Transmitters operating in the 22 GHz to 26,65 GHz band . 8 5.2.1.1.1 Permitted range of frequencies . 8 5.2.1.1.2 Maximum radiated average power density (e.i.r.p.) . 8 5.2.1.1.3 Maximum radiated peak power density (e.i.r.p.) . 8 5.2.1.2 Transmitters operating in the 24,050 GHz to 24,250 GHz band . 8 5.2.1.2.1 Permitted range of frequencies . 8 5.2.1.2.2 Equivalent isotropically radiated power (e.i.r.p.) . 8 5.2.1.3 Vertical plane transmitter emissions . 8 5.2.1.4 Transmitter spurious and out-of-band emissions . 9 5.2.2 Receiver test suites. 9 5.2.2.1 Receiver spurious emissions . 9 5.2.3 Installation requirements . 9 5.3 Interpretation of results and measurement uncertainty . 9 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 10 Annex B (informative): The EN title in the official languages . 12 Annex C (informative): Bibliography . 13 History . 14 SIST EN 302 288-2 V1.3.2:2009
ETSI ETSI EN 302 288-2 V1.3.2 (2009-01) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive") [i.2]. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices, Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range, as identified below: Part 1: "Technical requirements and methods of measurement"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates Date of adoption of this EN: 22 January 2009 Date of latest announcement of this EN (doa): 30 April 2009 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 October 2009 Date of withdrawal of any conflicting National Standard (dow): 31 October 2010
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 302 288-2 V1.3.2:2009
ETSI ETSI EN 302 288-2 V1.3.2 (2009-01) 5 1 Scope The present document applies to Short Range Devices (SRDs) in Road Transport and Traffic Telematics (RTTT) systems as described in the scope of EN 302 288-1 [1]: • with an integral antenna; • for ultra low power motion and distance monitoring radars for mobile applications only; • operating in the 22 GHz to 26,65 GHz frequency range. The applicability of the present document covers only the 24 GHz Short Range Radar (SRR) for road vehicles. The present document does not necessarily include all the characteristics which may be required by a user, nor does it necessarily represent the optimum performance achievable. NOTE: Member States of the European Union are required to prohibit the taking into service of equipment covered by the present document after a date defined in Commission Decision 2005/50/EC [i.4]. The present document covers transmitters intended to operate in a temporary frequency designation under the 24 GHz ECC decision ECC/DEC/(04)10 [i.5]. The application is also subject to the EU Commission decision on 24 GHz SRR EC 2005/50/EC [i.4]. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". The present document responds to the EC mandate M/329 [i.6] for Harmonized Standards covering Ultrawide band (UWB) applications. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent
...