SIST EN 15773:2018
(Main)Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
This European Standard specifies the agreements to be made between the client, the galvanizer / sherardizer, the chemical suppliers and the applicators of the pre-treatment and the powder organic coating systems (if they are not one and the same). It also specifies the quality of the galvanized or sherardized articles to which the powder organic coatings are to be applied and for the pre-treatment and powder organic coatings intended for application to the galvanized or sherardized articles.
This standard applies to the application of hot dip galvanized, sherardized and powder organic coatings by controlled industrial processes to articles consisting of or manufactured from steel. The standard applies to hot dip galvanized products, galvanized in accordance with EN ISO 1461 and EN 10240 or products sherardized in accordance with EN ISO 17668, as well as parts of these products manufactured from continuously galvanized sheet and strip galvanized in accordance with EN 10346, which, after the galvanizing and/or assembly, or sherardizing, will have a powder organic coating system applied. This standard also applies to products which have been hot dip galvanized or sherardized according to specific product standards to which powder organic systems are applied.
This standard might also be useful when supplying other organic coating systems (excluding wet paint systems).
Industrielle Pulverbeschichtung von feuerverzinkten und sherardisierten Stahlartikeln [Duplex-Systeme] - Spezifikationen, Empfehlungen und Leitlinien
Diese Europäische Norm legt Angaben für Verein¬barungen, die zwischen dem Kunden und dem Verzinker/Sherardisierer, den Chemikalienlieferanten sowie den Ausführenden für die Vorbehandlung und die Pulverbeschichtungssysteme (falls diese nicht identisch sind) zu treffen sind, fest. Sie legt auch die Qualität für die verzinkten oder sherardisierten Gegenstände, auf die Pulverbeschichtungssysteme aufzutragen sind, sowie für die Vorbehandlung und die Pulver¬beschichtungssysteme, die für verzinkte oder sherardisierte Artikel vorgesehen sind, fest.
Diese Norm gilt für das Aufbringen von feuerverzinkten und sherardisierten Überzügen sowie von Pulver-beschichtungen durch gesteuerte industrielle Prozesse auf Gegenstände, die aus Stahl bestehen oder aus Stahl hergestellt sind. Die Norm gilt sowohl für feuerverzinkte Erzeugnisse, verzinkt nach EN ISO 1461 und EN 10240, oder für Erzeugnisse, sherardisiert nach EN ISO 17668, als auch für Teile aus diesen Erzeugnissen, hergestellt aus Blechen und Bändern, die nach EN 10346 kontinuierlich feuerverzinkt oder bandverzinkt sind, auf die nach dem Verzinken und/oder dem Zusammenbau oder nach dem Sherardisieren ein Pulverbeschichtungssystem aufgetragen wird. Diese Norm gilt auch für Erzeugnisse, die nach spezifischen Produktnormen feuerverzinkt oder sherardisiert wurden und auf die Systeme zur Pulverbeschichtung angewendet werden.
Application industrielle de revêtements en poudre organiques à des produits en acier galvanisés à chaud ou shérardisés [systèmes duplex] - Spécifications, recommandations et lignes directrices
La présente Norme européenne spécifie les accords à passer entre le client, le galvanisateur/shérardiseur, les fournisseurs de composés chimiques et les applicateurs du prétraitement et des systèmes de revêtement de poudre organiques (s'ils ne sont pas une seule et même personne). Elle spécifie également la qualité des produits galvanisés ou shérardisés sur lesquels des revêtements de poudre organiques doivent être appliqués et concerne aussi le traitement préalable et les revêtements de poudre organiques destinés à l'application sur des produits galvanisés ou shérardisés.
La présente Norme concerne l'application de revêtements galvanisés à chaud, shérardisés et organiques en poudre par des procédés industriels contrôlés sur des produits en acier ou fabriqués à partir d'acier. Cette norme s'applique aux produits galvanisés à chaud, conformément aux EN ISO 1461 et EN 10240 ou aux produits shérardisés conformément à l'EN ISO 17668, ainsi qu'aux parties de ces produits fabriquées à partir de tôles ou de fils galvanisés en continu conformément à l'EN 10346, sur lesquels sera appliqué, après galvanisation et/ou assemblage ou shérardisation, un système de revêtement de poudre organique. Elle s'applique également aux produits ayant été galvanisés à chaud ou shérardisés selon des normes de produit spécifiques auxquelles les systèmes organiques en poudre s'appliquent.
Industrijska uporaba praškastih organskih premazov za izdelke iz vroče galvaniziranega ali difuzijsko pocinkanega jekla [sistemi dupleks] - Specifikacije, priporočila in smernice
Ta evropski standard določa pogodbe, ki jih morajo skleniti stranka, osebje, ki izvaja galvaniziranje/difuzijsko cinkanje, dobavitelji kemikalij ter osebje, ki izvaja predhodno obdelavo in nanos praškastih organskih sistemov premazov (če niso ista oseba). Določa tudi kakovost galvaniziranih ali difuzijsko pocinkanih izdelkov, na katere bodo naneseni praškasti organski premazi, ter predhodne obdelave in praškastih organskih premazov za galvanizirane ali difuzijsko pocinkane izdelke.
Ta standard se uporablja za nanos vroče galvaniziranih in difuzijsko pocinkanih premazov ter praškastih organskih premazov na jeklene izdelke z nadzorovanimi industrijskimi postopki. Standard se uporablja za vroče galvanizirane izdelke, skladne s standardoma EN ISO 1461 in EN 10240, ali difuzijsko pocinkane izdelke, skladne s standardom EN ISO 17668, ter za dele teh izdelkov, izdelane iz neprekinjeno galvaniziranih plošč in galvaniziranih trakov, skladnih s standardom EN 10326 ali EN 10327, na katere se po galvaniziranju in/ali sestavljanju ali difuzijskem cinkanju nanese praškasti organski premazni sistem. Ta standard se uporablja tudi za izdelke, ki so bili vroče galvanizirani ali difuzijsko pocinkani skladno z določenimi standardi za izdelek in na katere se nanesejo praškasti organski premazni sistemi.
Ta standard je lahko uporaben pri nanosih drugih organskih premaznih sistemov (razen mokrih barv).
General Information
- Status
- Published
- Public Enquiry End Date
- 07-Aug-2016
- Publication Date
- 13-Feb-2018
- Technical Committee
- IBLP - Paints and varnishes
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 23-Jan-2018
- Due Date
- 30-Mar-2018
- Completion Date
- 14-Feb-2018
Relations
- Effective Date
- 01-Mar-2018
Overview
EN 15773:2018 - "Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems]" is a CEN European Standard that defines specifications, recommendations and guidelines for producing durable duplex systems. It sets out the contractual and technical agreements between the client, galvanizer/sherardizer, chemical suppliers and applicators when applying powder organic coatings onto hot dip galvanized or sherardized steel using controlled industrial processes.
Key topics and technical requirements
- Scope and parties: Defines roles and required agreements between client, designer, galvanizer/sherardizer, chemical pre-treatment suppliers and powder applicators (Clause 1, 4).
- Ordering and information: Details information to be supplied at quotation and order stage, including surface quality, coating system and acceptance criteria (Clause 4).
- Fabrication: Requirements for steel surface condition, raw material composition, welds and markings that affect duplex performance (Clause 5).
- Zinc coating and surface: Acceptable zinc coatings (hot dip galvanizing per EN ISO 1461/EN 10240 and sherardizing per EN ISO 17668), cooling, inspection, and recommendations for surface smoothing prior to coating (Clause 6).
- Pre-treatment: Guidance on chemical pre-treatment and mechanical pre-treatment (e.g., sweep blasting) tailored to galvanized or sherardized substrates (Clause 7; Annex D).
- Powder organic coating layers: Specification, selection, application and repair of powder coatings intended for galvanized/sherardized steel (Clause 8).
- Handling and logistics: Packaging, storage, transport and on-site installation considerations to avoid damage or corrosion before and after coating (Clauses 6, 9, 10).
- Inspection, health & safety: Acceptance checks, inspection of finished products and applicable H&S considerations (Clauses 11, 12).
- Supporting guidance: Annexes provide practical guidance on design for galvanizing, surface chemistry, cooling and pre-treatment procedures (Annexes A–D).
Practical applications and users
EN 15773:2018 is used by:
- Galvanizers and sherardizers preparing articles for duplex finishes
- Powder coating applicators specifying pre-treatment and application parameters
- Specifiers, designers and clients who require durable aesthetic and corrosion performance from duplex systems
- Chemical suppliers and quality inspectors to ensure consistent, verifiable processes
Typical applications include structural steel, architectural components and continuously galvanized sheet/strip parts that require a powder organic topcoat for enhanced aesthetics and corrosion protection.
Related standards
Key complementary standards referenced:
- EN ISO 1461, EN 10240 (hot dip galvanizing)
- EN ISO 17668 (sherardizing)
- EN 13438 (powder organic coatings for galvanized/sherardized steel)
- EN 10346 (continuously hot-dip coated sheet/strip)
- EN ISO 14713 series (guidance on zinc coatings)
EN 15773:2018 helps ensure coordinated contractual arrangements and consistent technical practices for reliable duplex systems combining zinc coatings with powder organic coatings.
Frequently Asked Questions
SIST EN 15773:2018 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines". This standard covers: This European Standard specifies the agreements to be made between the client, the galvanizer / sherardizer, the chemical suppliers and the applicators of the pre-treatment and the powder organic coating systems (if they are not one and the same). It also specifies the quality of the galvanized or sherardized articles to which the powder organic coatings are to be applied and for the pre-treatment and powder organic coatings intended for application to the galvanized or sherardized articles. This standard applies to the application of hot dip galvanized, sherardized and powder organic coatings by controlled industrial processes to articles consisting of or manufactured from steel. The standard applies to hot dip galvanized products, galvanized in accordance with EN ISO 1461 and EN 10240 or products sherardized in accordance with EN ISO 17668, as well as parts of these products manufactured from continuously galvanized sheet and strip galvanized in accordance with EN 10346, which, after the galvanizing and/or assembly, or sherardizing, will have a powder organic coating system applied. This standard also applies to products which have been hot dip galvanized or sherardized according to specific product standards to which powder organic systems are applied. This standard might also be useful when supplying other organic coating systems (excluding wet paint systems).
This European Standard specifies the agreements to be made between the client, the galvanizer / sherardizer, the chemical suppliers and the applicators of the pre-treatment and the powder organic coating systems (if they are not one and the same). It also specifies the quality of the galvanized or sherardized articles to which the powder organic coatings are to be applied and for the pre-treatment and powder organic coatings intended for application to the galvanized or sherardized articles. This standard applies to the application of hot dip galvanized, sherardized and powder organic coatings by controlled industrial processes to articles consisting of or manufactured from steel. The standard applies to hot dip galvanized products, galvanized in accordance with EN ISO 1461 and EN 10240 or products sherardized in accordance with EN ISO 17668, as well as parts of these products manufactured from continuously galvanized sheet and strip galvanized in accordance with EN 10346, which, after the galvanizing and/or assembly, or sherardizing, will have a powder organic coating system applied. This standard also applies to products which have been hot dip galvanized or sherardized according to specific product standards to which powder organic systems are applied. This standard might also be useful when supplying other organic coating systems (excluding wet paint systems).
SIST EN 15773:2018 is classified under the following ICS (International Classification for Standards) categories: 25.220.60 - Organic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 15773:2018 has the following relationships with other standards: It is inter standard links to SIST EN 15773:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 15773:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YURþHIndustrielle Pulverbeschichtung von feuerverzinkten und sherardisierten Stahlartikeln [Duplex-Systeme] - Spezifikationen, Empfehlungen und LeitlinienApplication industrielle de revêtements en poudre organiques à des produits en acier galvanisés à chaud ou shérardisés [systèmes duplex] - Spécifications, recommandations et lignes directricesIndustrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 15773:2018SIST EN 15773:2018en,fr,de01-marec-2018SIST EN 15773:2018SLOVENSKI
STANDARDSIST EN 15773:20091DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15773
January
t r s z ICS
t wä t t rä { { Supersedes EN
s w y y uã t r r {English Version
Industrial application of powder organic coatings to hot dip galvanized or sherardiommendations and guidelinesApplication industrielle de revêtements en poudre organiques à des produits en acier galvanisés à chaud recommandations et lignes directrices
Industrielle Pulverbeschichtung von feuerverzinkten Spezifikationená Empfehlungen und Leitlinien This European Standard was approved by CEN on
x November
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w y y uã t r s z ESIST EN 15773:2018
Considerations when designing and fabricating items for galvanizing or sherardizing and subsequent application of powder organic coatings . 18 Annex B (informative)
Guidance on the influence of steel surface chemistry on the surface condition and pre-treatment of galvanized or sherardized articles prior to application of powder organic coatings . 19 SIST EN 15773:2018
Guidance on treatment of hot dip galvanized or sherardized articles prior to pre-treatment for application of powder organic coatings . 21 C.1 Cooling . 21 C.2 Prominent welds and sharp points on the zinc coating . 21 C.3 Avoidance of condensation during storage, packaging and transport after galvanizing or sherardizing . 21 Annex D (informative)
Guidance on pre-treatment of hot dip galvanized or sherardized articles prior to the application of powder organic coatings . 22 D.1 General . 22 D.2 Mechanical pre-treatment . 22 Bibliography . 23 SIST EN 15773:2018
EN ISO 14713-2 and
«3 also provide useful information on design for galvanizing and sherardizing respectively. Good communications in place and agreements made between the client and the company applying the powder organic coating regarding general quality requirements of the powder organic coating. Good communications in place and agreements made between client, galvanizer or sherardizer and applicator of the powder organic coating regarding quality requirements for duplex systems in relation to quality of zinc coating, the pre-treatment and powder organic coating.
EN ISO 14713-2 —
EN ISO 14713-3 —
EN ISO 1461 —
EN ISO 17668 Order Client Fabricator Builder Construction company Galvanizer / sherardizer Powder manufacturer Pre-treatment chemical supplier Applicator Clause 4 —
EN 10021 —
EN 10130 —
EN ISO 1461 —
EN 10346 —
EN ISO 17668 —
EN 13438 Fabrication Client Fabricator Construction company Clause 5 —
EN 10021 —
EN 10163–1 —
EN 10163 «2 —
EN 10163 «3 —
EN 10221 —
EN ISO 1461 —
EN ISO 5817 —
EN ISO 14713-2 —
EN ISO 14713-3 Hot dip galvanizing / sherardizing Client Galvanizer / sherardizer Clause 6 —
EN ISO 1461 —
EN 10240 —
EN ISO 17668 —
EN ISO 14713-2 —
EN ISO 14713-3 Transport and storage of galvanized or sherardized articles Client Galvanizer / sherardizer Transporter / applicator 6.3 Pre-treatment Galvanizer / sherardizer Chemical supplier and applicator Clause 7 —
EN 13438 Organic coating Client Galvanizer / sherardizer Applicator(s) 6.3 and Clause 8 —
EN 13438 —
EN ISO 1461 SIST EN 15773:2018
EN 10240 —
EN ISO 17668 Inspection Client Applicator and Galvanizer / sherardizer Clause 11 —
EN 13438 —
EN ISO 1461 —
EN ISO 17668 —
ISO 9223 Transport and storage of duplex coated articles in transit and on site Client Applicator Transporter Clauses 9 and 10 and —
EN 13438 Installation Client Construction company 8.3 and Clauses 9 and 10 4.2 Request for quotation In its request for quotation to the galvanizer or the sherardizer, the client shall state to all relevant parties (see Table 1) that the hot dip galvanized or sherardized products shall be subsequently provided with a powder organic coating. In the event that the client has not submitted a request for quotation, the client shall state, upon delivery of the products to be hot dip galvanized or sherardized that a powder organic coating system is subsequently to be applied to these products. Requests for quotation shall also include the following: a) the class or classes of coating powders app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...