SIST EN 2267-009:2017
(Main)Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard
This European Standard specifies the characteristics of electrical lightweight wires DRA family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC electrical systems of aircraft at operating temperatures between 65 °C and 260 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115/200 V AC).
In addition, these cables may be suitable for use at 230/400 V AC in pressurised zones only when installed to take account of possible short circuit effects.
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen – 55 °C und 260 °C - Teil 009: DRA-Familie Ein-und mehradrige Leitungen - Produktnorm
Diese Europäische Norm legt die Eigenschaften von leichten elektrischen Leitungen der DRA-Familie zur Verwendung in elektrischen Wechselstrombordnetzen mit 115 V (Phase auf Neutral) oder 200 V (Phase auf Phase) von Luftfahrzeugen bei Betriebstemperaturen zwischen −65 °C und 260 °C fest. Diese Leitungen sind in den Größen AWG 26 bis AWG 14 (115/200 V AC) nachweislich lichtbogenfest.
Darüber hinaus können diese Leitungen zur Verwendung bei 230/400 V AC in druckbelüfteten Zonen nur geeignet sein, wenn bei der Installation eventuelle Kurzschlüsse berücksichtigt werden.
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Famille DRA, fil simple et éléments assemblés - Norme de produit
La présente Norme européenne spécifie les caractéristiques des câbles électriques légers de la famille DRA, utilisés dans les systèmes électriques de bord des aéronefs 115 V (entre phase et neutre) ou 200 V (entre phases) AC à des températures de fonctionnement comprises entre 65 °C et 260 °C. Ces câbles de taille 26 à 14 AWG (115/200 V AC) ont démontré leurs résistances aux arcs électriques.
De plus, les câbles peuvent être utilisés pour des tensions 230/400 V AC dans les zones pressurisées, uniquement quand l’installation tient compte des effets possibles des courts circuits.
Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 009. del: Družina DRA, snop enožilnih in večžilnih kablov - Standard za proizvod
Ta evropski standard določa karakteristike družine električnih kablov iz lahkih materialov iz družine DRA za uporabo na krovu v električnih sistemih letala s 115 V (faza, zvezana z nevtralno napetostjo) ali 200 V (faza, zvezana s fazo) pri temperaturi delovanja med –65 °C in 260 °C. Ti kabli so dokazano odporni proti obloku v velikostih od 26 do 14 AWG (115/200 V AC).
Poleg tega se lahko te kable uporablja pri 230/400 V AC v conah pod tlakom le, če so nameščeni, da se upoštevajo možni učinki kratkega stika.
General Information
- Status
- Published
- Publication Date
- 17-Aug-2017
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 17-Aug-2017
- Due Date
- 22-Oct-2017
- Completion Date
- 18-Aug-2017
Relations
- Effective Date
- 16-Aug-2017
- Effective Date
- 04-Feb-2015
Overview - EN 2267-009:2017 (DRA family)
EN 2267-009:2017 is a CEN aerospace product standard for the DRA family of lightweight electrical wires intended for aircraft AC systems. The title references operating temperatures between −55 °C and 260 °C, while the standard scope specifies −65 °C to 260 °C for on‑board use in 115 V (phase-to-neutral) or 200 V (phase-to-phase) AC systems. These DRA cables are arc resistant for conductor sizes AWG 26 to AWG 14 and may be used at 230/400 V AC in pressurised zones when installation accounts for short‑circuit effects.
Key topics and technical requirements
- Materials and construction
- Conductors: copper or copper alloy, nickel plated per EN 4434 / EN 2083.
- Insulation: defined to meet required characteristics in Clause 5.
- Single and multicore assemblies; colour coding and cabling per EN 2267-002 and EN 2235.
- Electrical and mechanical properties
- Suitable for aircraft AC distribution: 115/200 V AC (primary) and controlled use at 230/400 V AC in pressurised zones.
- Nominal conductor sections from very small AWG sizes up to large mm2 codes (tableed in the standard).
- Environmental and performance tests (reference EN 3475 series)
- Temperature endurance and accelerated ageing (up to 260–310 °C test regimes).
- Thermal shock and cold‑bend tests (including −65 °C exposure).
- Flammability (method 1) - extinguishing time ≤ 3 s.
- Wet/dry arc tracking, wet short‑circuit and resistance to fluids.
- Mechanical tests: dynamic cut‑through, scrape abrasion, torsion, flexure endurance, and strippability.
- Smoke density and toxicity requirements.
- Quality, identification and delivery
- Quality assurance per EN 9133; designation, marking, packaging and delivery lengths referenced to EN 2084/EN 2267-002.
Practical applications
- Wiring harnesses and power distribution in commercial and military aircraft where lightweight, high‑temperature, arc‑resistant conductors are required.
- Avionics and onboard electrical systems operating at 115/200 V AC (and limited 230/400 V AC use in pressurised zones).
- Replacements, procurement specifications and supplier quality control for aerospace cable manufacturers.
Who should use this standard
- Aerospace cable manufacturers and material suppliers
- Aircraft OEMs, harness designers and electrical engineers
- Certification authorities, procurement and QA teams responsible for part qualification and compliance
Related standards
- EN 2083, EN 2084 (conductors and cable technical spec)
- EN 2235 (single/multicore screened/jacketed assemblies)
- EN 3475 series (test methods)
- EN 4434 (lightweight conductors), EN 2267-002 (general requirements), EN 9133 (qualification)
Keywords: EN 2267-009:2017, aerospace cables, DRA family, arc resistant wire, aircraft electrical systems, high temperature cables, AWG 26 to 14.
Frequently Asked Questions
SIST EN 2267-009:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard". This standard covers: This European Standard specifies the characteristics of electrical lightweight wires DRA family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC electrical systems of aircraft at operating temperatures between 65 °C and 260 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115/200 V AC). In addition, these cables may be suitable for use at 230/400 V AC in pressurised zones only when installed to take account of possible short circuit effects.
This European Standard specifies the characteristics of electrical lightweight wires DRA family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC electrical systems of aircraft at operating temperatures between 65 °C and 260 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115/200 V AC). In addition, these cables may be suitable for use at 230/400 V AC in pressurised zones only when installed to take account of possible short circuit effects.
SIST EN 2267-009:2017 is classified under the following ICS (International Classification for Standards) categories: 29.060.20 - Cables; 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2267-009:2017 has the following relationships with other standards: It is inter standard links to SIST EN 2267-009:2013, SIST EN 2267-009:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 2267-009:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen – 55 °C und 260 °C - Teil 009: DRA-Familie Ein-und mehradrige Leitungen - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Famille DRA, fil simple et éléments assemblés - Norme de produitAerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard49.060Aerospace electric equipment and systems29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 2267-009:2017SIST EN 2267-009:2017en,fr,de01-oktober-2017SIST EN 2267-009:2017SLOVENSKI
STANDARDSIST EN 2267-009:20131DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2267-009
August
t r s y ICS
v {ä r x r Supersedes EN
t t x yæ r r {ã t r s uEnglish Version
Aerospace series æ Cablesá electricalá for general purpose æ Operating temperatures between æ w w
¹C and
t x r
¹C æ Part
r r {ã DRA familyá single and multicore assembly æ Product standard Série aérospatiale æ Câblesá électriquesá d 5usage général æ Températures de fonctionnement comprises entre æ w w
¹C et
t x r
¹C æ Partie
r r {ã Famille DRAá fil simple et éléments assemblés æ Norme de produit
Luftæ und Raumfahrt æ Leitungená elektrischá für allgemeine Verwendung æ Betriebstemperaturen zwischen æ w w
¹C und
t x r
¹C æ Teil
r r {ã DRAæFamilie Einæund mehradrige Leitungen æ Produktnorm This European Standard was approved by CEN on
t r February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
t t x yæ r r {ã t r s y ESIST EN 2267-009:2017
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms, definitions, symbols and abbreviations . 4 4 Materials and construction . 4 5 Required characteristics . 5 6 Quality assurance . 9 7 Designation . 9 8 Identification and marking . 9 9 Packaging, labelling and delivery lengths . 9 10 Technical specification . 9
EN 2083, Aerospace series — Copper and copper alloys conductors for electrical cables — Product standard EN 2084, Aerospace series — Cables, electrical, general purpose,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...