SIST EN 12199:2020
(Main)Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
This European Standard specifies the characteristics of homogeneous and heterogeneous relief or studded rubber floor coverings, supplied in either tile or roll form.
This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.
Elastische Bodenbeläge - Spezifikation für homogene und heterogene profilierte Elastomer-Bodenbeläge
Dieses Dokument legt die Eigenschaften homogener und heterogener profilierter oder genoppter Elastomer-Bodenbeläge fest, die entweder in Form von Platten oder Rollen geliefert werden.
Dieses Dokument enthält ein Klassifizierungssystem auf der Grundlage der Nutzungsintensität, das zeigt, wo diese Bodenbeläge einen zufriedenstellenden Nutzen bieten (siehe EN ISO 10874). Dieses Dokument legt auch die Anforderungen zur Kennzeichnung fest.
Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et hétérogènes en caoutchouc à relief
Le présent document spécifie les caractéristiques des revêtements de sol homogènes et hétérogènes en caoutchouc à relief ou avec un relief structuré, fournis sous forme de dalles ou de rouleaux.
Le présent document inclut un système de classification basé sur l'intensité d'utilisation, qui indique l'endroit où il convient que ces revêtements de sol rendent un service satisfaisant (voir EN ISO 10874). Il spécifie également des exigences de marquage.
Netekstilne talne obloge - Specifikacija homogenih in heterogenih reliefnih gumenih talnih oblog
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12199:2020
01-julij-2020
Nadomešča:
SIST EN 12199:2010
Netekstilne talne obloge - Specifikacija homogenih in heterogenih reliefnih
gumenih talnih oblog
Resilient floor coverings - Specifications for homogeneous and heterogeneous relief
rubber floor coverings
Elastische Bodenbeläge - Spezifikation für homogene und heterogene profilierte
Elastomer-Bodenbeläge
Revêtements de sol résilients - Spécifications des revêtements de sol homogènes et
hétérogènes en caoutchouc à relief
Ta slovenski standard je istoveten z: EN 12199:2020
ICS:
97.150 Talne obloge Floor coverings
SIST EN 12199:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12199:2020
---------------------- Page: 2 ----------------------
SIST EN 12199:2020
EN 12199
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 12199:2010
English Version
Resilient floor coverings - Specifications for homogeneous
and heterogeneous relief rubber floor coverings
Revêtements de sol résilients - Spécifications des Elastische Bodenbeläge - Spezifikationen für homogene
revêtements de sol homogènes et hétérogènes en und heterogene profilierte Elastomer-Bodenbeläge
caoutchouc à relief
This European Standard was approved by CEN on 14 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12199:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12199:2020
EN 12199:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 General requirements . 5
5 Classification requirements . 7
6 Marking . 8
Annex A (informative) Optional properties . 9
Bibliography . 10
2
---------------------- Page: 4 ----------------------
SIST EN 12199:2020
EN 12199:2020 (E)
European foreword
This document (EN 12199:2020) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate coverings”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12199:2010.
In comparison with the previous edition, the following technical modifications have been made:
— references to standards in Table 1, Table 2 and Annex A.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 12199:2020
EN 12199:2020 (E)
1 Scope
This document specifies the characteristics of homogeneous and heterogeneous relief or studded
rubber floor coverings, supplied in either tile or roll form.
This document includes a classification system based on intensity of use, which shows where these
resilient floor coverings will give satisfactory service (see EN ISO 10874). It also specifies requirements
for marking.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12466, Resilient floor coverings — Vocabulary
EN ISO 105-B02:2014, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test (ISO 105-B02:2014)
EN ISO 10874, Resilient, textile and laminate floor coverings — Classification (ISO 10874)
EN ISO 239
...
SLOVENSKI STANDARD
oSIST prEN 12199:2019
01-julij-2019
Netekstilne talne obloge - Specifikacija homogenih in heterogenih reliefnih
gumenih talnih oblog
Resilient floor coverings - Specifications for homogeneous and heterogeneous relief
rubber floor coverings
Elastische Bodenbeläge - Spezifikation für homogene und heterogene profilierte
Elastomer-Bodenbeläge
Ta slovenski standard je istoveten z: prEN 12199
ICS:
97.150 Talne obloge Floor coverings
oSIST prEN 12199:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12199:2019
---------------------- Page: 2 ----------------------
oSIST prEN 12199:2019
DRAFT
EUROPEAN STANDARD
prEN 12199
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 97.150 Will supersede EN 12199:2010,
EN 1816:2010,
EN 1817:2010
English Version
Resilient floor coverings - Specifications for homogeneous
and heterogeneous relief rubber floor coverings
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12199:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12199:2019
prEN 12199:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General requirements . 5
5 Classification requirements . 6
6 Marking . 6
Annex A (informative) Optional properties . 7
Bibliography . 8
2
---------------------- Page: 4 ----------------------
oSIST prEN 12199:2019
prEN 12199:2019 (E)
European foreword
This document (prEN 12199:2019) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate coverings”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12199:2010.
In comparison with the previous edition, the following technical modifications have been made:
— references to standards in Table 1, Table 2 and Annex A.
3
---------------------- Page: 5 ----------------------
oSIST prEN 12199:2019
prEN 12199:2019 (E)
1 Scope
This document specifies the characteristics of homogeneous and heterogeneous relief or studded
rubber floor coverings, supplied in either tile or roll form.
This document includes a classification system based on intensity of use, which shows where these
resilient floor coverings will give satisfactory service (see EN ISO 10874). It also specifies requirements
for marking.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12466, Resilient floor coverings – Vocabulary
EN ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon
arc fading lamp test (ISO 105-B02)
EN ISO 10874, Resilient, textile and laminate floor coverings — Classification (ISO 10874)
EN ISO 23999, Resilient floor coverings — Determination of dimensional stability and curling after
exposure to heat (ISO 23999)
EN ISO 24340, Resilient floor coverings — Determination of the thickness of layers (ISO 24340)
EN ISO 24341, Resilient and textile floor coverings — Determination of length, w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.