SIST EN 17816:2024
(Main)Liming materials - Determination of physical and chemical properties and specific contaminants
Liming materials - Determination of physical and chemical properties and specific contaminants
This document specifies references to methods for the determination of the following physical and chemical properties and specific contaminants in liming materials:
--neutralizing value;
--Reactivity;
--Grain size/Granulometry;
--Total calcium oxide content (CaO);
--Total magnesium content (MgO);
--Cadmium content;
--Hexavalent chromium content;
--Mercury content;
--Nickel and lead content;
--Arsenic content;
--Total chromium content.
Kalkdünger - Bestimmung physikalischer und chemischer Eigenschaften und spezifischer Kontaminanten
Dieses Dokument ist anwendbar für Kalkdünger, die Oxide, Hydroxide, Carbonate oder Silikate der Nährstoffe Calcium (Ca) oder Magnesium (Mg) enthalten und deren Aufgabe darin besteht, die Bodenacidität zu korrigieren. Es ist anwendbar für Düngeprodukte, die als Kategorie PFC 2 oder als PFC 2 Komponente von PFC 7 aus Verordnung (EU) 2019/1009 [3] eingestuft sind.
ANMERKUNG Die in diesem Dokument erwähnten Verfahren wurden nicht für Düngeproduktemischungen (en. fertilizing product blends) (PFC 7) [3] getestet.
Dieses Dokument legt Verweisungen auf Verfahren zur Bestimmung der folgenden physikalischen und chemischen Eigenschaften und spezifischen Kontaminanten in Kalkdüngern fest:
- Bestimmung des Cadmiumgehalts;
- Bestimmung des Chrom-VI-Gehalts;
- Bestimmung des Quecksilbergehalts;
- Bestimmung des Nickelgehalts;
- Bestimmung des Bleigehalts;
- Bestimmung des Arsengehalts;
- Bestimmung des Gesamtchromgehalts;
- Bestimmung des Neutralisationswertes;
- Bestimmung der Reaktivität;
- Bestimmung der Korngröße/Granulometrie;
- Bestimmung des Gesamtgehalts an CaO;
- Bestimmung des Gesamtgehalts an MgO.
Dieses Dokument legt keine Verweisungen auf Verfahren zur Bestimmung der folgenden physikalischen und chemischen Eigenschaften und spezifischen Kontaminanten in Kalkdüngern fest, da sie von anderen Europäischen Normen abgedeckt werden:
- Bestimmung des Kupfer- und Zinkgehalts;
- Bestimmung des Chloridgehalts;
- Bestimmung der Menge (angegeben nach Masse oder Volumen);
- Bestimmung des Phosphonatgehalts.
Amendements minéraux basiques - Détermination des propriétés physiques et chimiques et des contaminants spécifiques
Le présent document s’applique aux amendements minéraux basiques qui contiennent des oxydes, des hydroxydes, des carbonates ou des silicates des éléments nutritifs calcium (Ca) ou magnésium (Mg) et dont la fonction est de corriger l’acidité du sol. Il s’applique aux fertilisants classés dans la catégorie PFC 2 ou au composant PFC 2 de la catégorie PFC 7 du règlement (UE) 2019/1009 [3].
NOTE Les méthodes citées dans ce document n'ont pas été testées pour les mélanges de produits fertilisants (PFC 7) [3].
Le présent document spécifie les références aux méthodes de détermination des propriétés physiques et chimiques suivantes et des contaminants spécifiques dans les amendements minéraux basiques :
- Détermination de la teneur en cadmium ;
- Détermination de la teneur en chrome VI ;
- Détermination de la teneur en mercure ;
- Détermination de la teneur en nickel ;
- Détermination de la teneur en plomb ;
- Détermination de la teneur en arsenic ;
- Détermination de la teneur en chrome total ;
- Détermination de la valeur neutralisante ;
- Détermination de la réactivité ;
- Détermination de la finesse de mouture/granulométrie ;
- Détermination de la teneur en CaO total ;
- Détermination de la teneur en MgO total.
Le présent document ne spécifie pas les références aux méthodes de détermination des propriétés physiques et chimiques suivantes et des contaminants spécifiques dans les amendements minéraux basiques, car ils sont couverts dans d'autres normes européennes :
- Détermination de la teneur en cuivre et en zinc ;
- Détermination de la teneur en chlorure ;
- Détermination de la quantité (indiquée en masse ou volume) ;
- Détermination de la teneur en phosphonates.
Sredstva za apnjenje - Določanje fizikalnih in kemijskih lastnosti ter specifičnih onesnaževal
Ta dokument navaja metode za določanje naslednjih fizikalnih in kemijskih lastnosti ter specifičnih onesnaževal v sredstvih za apnenje:
– nevtralizacijska vrednost;
– reaktivnost;
– velikost zrna/granulometrija;
– skupna vsebnost kalcijevega oksida (CaO);
– skupna vsebnost magnezija (MgO);
– vsebnost kadmija;
– vsebnost šestvalentnega kroma;
– vsebnost živega srebra;
– vsebnost niklja in svinca;
– vsebnost arzena;
– skupna vsebnost kroma.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Sredstva za apnjenje - Določanje fizikalnih in kemijskih lastnosti ter specifičnih
onesnaževal
Liming materials - Determination of physical and chemical properties and specific
contaminants
Kalkdünger - Bestimmung physikalischer und chemischer Eigenschaften und
spezifischer Kontaminanten
Amendements minéraux basiques - Détermination des propriétés physiques et
chimiques et des contaminants spécifiques
Ta slovenski standard je istoveten z: EN 17816:2023
ICS:
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17816
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 65.080
English Version
Liming materials - Determination of physical and chemical
properties and specific contaminants
Amendements minéraux basiques - Détermination des Kalkdünger - Bestimmung physikalischer und
propriétés physiques et chimiques et des contaminants chemischer Eigenschaften und spezifischer
spécifiques Kontaminanten
This European Standard was approved by CEN on 27 February 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17816:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 7
4 Sampling and sample preparation . 7
4.1 Sampling . 7
4.2 Sample preparation . 7
5 Requirements . 7
5.1 General. 7
5.2 Determination of physical and chemical properties . 7
5.2.1 Neutralizing value. 7
5.2.2 Reactivity . 7
5.2.3 Grain size/Granulometry . 7
5.2.4 Total calcium oxide (CaO) content . 7
5.2.5 Total magnesium oxide (MgO) content . 7
5.3 Determination of specific contaminants . 8
5.3.1 Cadmium content . 8
5.3.2 Hexavalent chromium content . 8
5.3.3 Mercury content . 8
5.3.4 Nickel content . 8
5.3.5 Lead content . 8
5.3.6 Arsenic content . 8
5.3.7 Total chromium content . 8
Annex ZA (informative) Relationship of this European Standard and the essential
requirements of Regulation (EU) 2019/1009 making available on the market of EU
fertilizing products aimed to be covered . 9
Bibliography . 11
European foreword
This document (EN 17816:2023) has been prepared by Technical Committee CEN/TC 260 “Fertilizers
and liming materials” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2023, and conflicting national standards shall
be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral part
of this document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
Regulation (EU) 2019/1009 [3] lays down the rules on the making available on the market of EU
fertilizing products and the specific safety, quality and labelling requirements for the defined product
function categories (PFCs). Liming materials have been classified as PFC 2.
In this document the normative references of the test methods to be used for liming materials (PFC 2) are
defined in order to measure the compliance with the related requirement in Regulation
(EU) 2019/1009 [3].
Supplementary denominations and specifications widely used in Europe are given in EN 14069 [2].
1 Scope
This document is applicable to liming materials, which contain oxides, hydroxides, carbonates or silicates
of the nutrients calcium (Ca) or magnesium (Mg) and the function of which is to correct soil acidity. It is
applicable to fertilizing products, which are classified as PFC 2 or the PFC 2 component in PFC 7 of
Regulation (EU) 2019/1009 [3].
NOTE The methods referred to in this document have not been tested for fertilizing product blends (PFC 7) [3].
This document specifies references to the methods for the determination of the following physical and
chemical properties and specific contaminants in liming materials:
— Determination of the cadmium content;
— Determination of the chromium VI content;
— Determination of the mercury content;
— Determination of the nickel content;
— Determination of the lead content;
— Determination of the arsenic content;
— Determination of the total chromium content;
— Determination of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.