SIST EN 3475-512:2021

SLOVENSKI STANDARD
SIST EN 3475-512:2021
01-maj-2021
Nadomešča:
SIST EN 3475-512:2004
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Metode preskušanja -
512. del: Upogibna trdnost
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure
endurance
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung -
Wechselbiegefestigkeit - Teil 512: Wechselbiegefestigkeit
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 512 : Résistance à la flexion
Ta slovenski standard je istoveten z: EN 3475-512:2021
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3475-512:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3475-512:2021

---------------------- Page: 2 ----------------------
SIST EN 3475-512:2021


EN 3475-512
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2021
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3475-512:2002
English Version

Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 512: Flexure endurance
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 512 : Luftfahrtverwendung - Prüfverfahren - Teil 512:
Résistance à la flexion Wechselbiegefestigkeit
This European Standard was approved by CEN on 2 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3475-512:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3475-512:2021
EN 3475-512:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens and principle of test . 4
5 Apparatus and installation of specimens . 4
6 Procedure . 5
7 Requirement . 6

2

---------------------- Page: 4 ----------------------
SIST EN 3475-512:2021
EN 3475-512:2021 (E)
European foreword
This document (EN 3475-512:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2021, and conflicting national standards shall
be withdrawn at the latest by September 2021.
Attention i
...