kSIST FprEN 1717:2024
(Main)Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow
Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow
This document specifies a methodology for protecting potable water in potable water installations within and outside buildings but within premises from the risk of pollution by backflow of non-potable water and gives recommendations on the design, risk analysis, backflow prevention devices and their installation methods.
This methodology is also intended to be used outside premises for all potable water systems connected to a potable water distribution system up to and including the point of use.
The product standards for the specific backflow prevention devices or arrangements are intended to be used in conjunction with this document. In the absence of a product standard, this document is intended to be used as a reference to draw up a specification for the development of new devices or arrangements.
Schutz des Trinkwassers vor Verunreinigungen in Trinkwasser-Installationen und allgemeine Anforderungen an Sicherungseinrichtungen zur Verhütung von Trinkwasserverunreinigungen durch Rückfließen
Dieses Dokument legt eine Methodik fest, um Trinkwasser in Trinkwasser-Installationen innerhalb von Gebäuden und außerhalb von Gebäuden, aber innerhalb von Grundstücken vor dem Risiko von Verunreinigungen durch das Rückfließen von Nichttrinkwasser zu schützen, und es gibt Empfehlungen zur Konstruktion, zur Risikoanalyse, zu Sicherungseinrichtungen gegen Rückfließen und zu deren Einbauverfahren.
Diese Methodik ist auch zur Anwendung außerhalb von Grundstücken bei allen Trinkwasser-Installationen gedacht, die mit einem Trinkwasser-Verteilungssystem verbunden sind, bis einschließlich der Entnahmestelle.
Es ist vorgesehen, die Produktnormen für die jeweiligen Armaturen oder Vorrichtungen zur Verhinderung des Rückfließens zusammen mit diesem Dokument zu verwenden. Falls keine Produktnormen vorhanden sind, ist dieses Dokument dazu vorgesehen, als Grundlage für die Beschreibung neuentwickelter Armaturen oder Vorrichtungen zu dienen.
Protection contre la pollution de l’eau destinée à la consommation humaine dans les installations d’eau potable et exigences générales applicables aux dispositifs de protection contre la pollution par retour
Le présent document spécifie une méthode de protection de l’eau potable dans des installations d’eau potable à l’intérieur et à l’extérieur des bâtiments, mais aussi dans les locaux, contre le risque de pollution par retour de l’eau non potable. Il donne également des recommandations sur la conception, l’analyse des risques, les dispositifs de protection contre les retours et leurs méthodes d’installation.
Cette méthode est également destinée à être utilisée en dehors des locaux, dans tous les réseaux d’eau potable raccordés à un réseau de distribution d’eau potable jusqu’au point d’utilisation inclus.
Les normes de produits concernant les dispositifs ou les systèmes de protection contre les retours spécifiques sont destinées à être utilisées conjointement avec le présent document. En l’absence d’une norme de produit, le présent document est destiné à être utilisé comme référence pour établir une spécification pour le développement de nouveaux dispositifs ou systèmes.
Varovanje pitne vode pred onesnaževanjem v napeljavah za pitno vodo in splošne zahteve za varovala za preprečitev onesnaževanja pitne vode zaradi povratnega toka
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1717:2023
01-julij-2023
Varovanje pitne vode pred onesnaževanjem v napeljavah za pitno vodo in splošne
zahteve za varovala za preprečitev onesnaževanja pitne vode zaradi povratnega
toka
Protection against pollution of water intended for human consumption in potable water
installations and general requirements for devices to prevent pollution by backflow
Schutz des Trinkwassers vor Verunreinigungen in Trinkwasser-Installationen und
allgemeine Anforderungen an Sicherungseinrichtungen zur Verhütung von
Trinkwasserverunreinigungen durch Rückfließen
Protection contre la pollution de l’eau destinée à la consommation humaine dans les
installations d’eau potable et exigences générales applicables aux dispositifs de
protection contre la pollution par retour
Ta slovenski standard je istoveten z: prEN 1717
ICS:
13.060.20 Pitna voda Drinking water
91.140.60 Sistemi za oskrbo z vodo Water supply systems
oSIST prEN 1717:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 1717:2023
oSIST prEN 1717:2023
DRAFT
EUROPEAN STANDARD
prEN 1717
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 13.060.20; 91.140.60 Will supersede EN 1717:2000
English Version
Protection against pollution of water intended for human
consumption in potable water installations and general
requirements for devices to prevent pollution by backflow
Protection contre la pollution de l'eau potable dans les Schutz des Trinkwassers vor Verunreinigungen in
réseaux intérieurs et exigences générales des Trinkwasser-Installationen und allgemeine
dispositifs de protection contre la pollution par retour Anforderungen an Sicherungseinrichtungen zur
Verhütung von Trinkwasserverunreinigungen durch
Rückfließen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 164.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1717:2023 E
worldwide for CEN national Members.
oSIST prEN 1717:2023
prEN 1717:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Pollution of potable water: general observations . 9
4.1 General. 9
4.2 Backflow of non-potable water . 9
4.3 Cross-connection . 9
4.4 External influences . 9
4.5 Materials . 9
4.6 Stagnation . 9
4.7 Inadequate or improper maintenance . 9
5 Analysis method of the pollution risks and choice of protection . 10
5.1 General remarks . 10
5.2 Determination of fluid categories . 10
5.2.1 General. 10
5.2.2 Category 1 . 10
5.2.3 Category 2 . 10
5.2.4 Category 3 . 10
5.2.5 Category 4 . 10
5.2.6 Category 5 . 10
5.2.7 Mixture of fluids . 11
5.3 Determination of the installation characteristics . 11
5.3.1 General. 11
5.3.2 Pressure . 11
5.3.3 Connections . 11
5.3.4 Risk attenuation . 12
5.4 Separation by single or double walls . 12
5.4.1 General. 12
5.4.2 Rules . 12
5.4.3 Leakage test on double-wall-separation . 12
5.5 Air break to drain . 13
5.6 Installation matrix . 13
5.7 Protection units . 13
5.7.1 Generalities . 13
5.7.2 Functional requirements for protection units against pollution . 14
5.7.3 Description and installation requirements of the protection units . 15
5.8 Matrix of the protection units appropriate to fluid categories . 15
5.9 Summary of analysis method . 16
6 Protection of equipment installed at the draw off point (Point-of-Use systems) . 16
6.1 General. 16
6.2 Special provisions for domestic Point-of-Use systems . 17
oSIST prEN 1717:2023
prEN 1717:2023 (E)
7 Protection at the connection point to the public potable water system . 17
8 Air break to drain . 17
Annex A (informative) Reference list of the protection units . 19
Annex B (informative) Guide table for determining the fluid category from which
protection is required . 54
Annex C (informative) Example for the selection of protection devices for the domestic and
non-domestic use . 56
C.1 Example – Care lift bath . 56
C.2 Example – Utilization of rain water . 57
C.3 Example – Detergent dosing system . 59
C.4 Example – Filling station for heating systems . 61
C.5 Example – Animal drinking trough . 62
C.6 Example – Flushing compressor for sewages systems . 63
C.7 Example – Tank filling for vehicles with water tanks . 64
Bibliography . 66
oSIST prEN 1717:2023
prEN 1717:2023 (E)
European foreword
This document (prEN 1717:2023) has been prepared by Technical Committee CEN/TC 164 “Water
supply”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
The UK Matrix of the protection units appropriate to fluid categories (Table 2) and the determination of
fluid categories (5.2) differs to that detailed within the body of this document. The British Standard
version of EN 1717 therefore contains an A deviation to cover the limited technical deviations to ensure
compliance with the Water Supply (fittings) Regulations 1999.
This document supersedes EN 1717:2000.
The main changes compared to the previous edition are listed below:
a) the scope has been made more precise, extended and revised;
b) terms and definitions have been amended;
c) all Figures have been updated and re-drawn;
d) Table 2 has been updated;
e) Clause “Air break to drain” has been revised;
f) Annex A and Annex B have been completely revised;
g) Annex C has been revised and provides application examples.
oSIST prEN 1717:2023
prEN 1717:2023 (E)
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption, caused
by the products covered by this document:
1) this document provides no information as to whether the products may be used without restriction
in any of the Member state of the EU or EFTA;
2) it should be noted that, while awaiting the adoption of verifiable European criteria, existing
national regulations concerning the use and/or the characteristics of these products remain in
force.
Annex A, Annex B and Annex C of this document are informative.
oSIST prEN 1717:2023
prEN 1717:2023 (E)
1 Scope
This document specifies a methodology for protecting potable water in potable water installations
within and outside buildings but within premises from the risk of p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.