SIST EN ISO 7625:2014
(Main)Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
This International Standard specifies methods for preparing a sample from one or more sintered parts to be analysed for free or total carbon content. Combined carbon is determined as the difference between total and free carbon. This standard covers the preparation of samples for the determination of carbon by a chemical method, i.e. combustion in oxygen and measurement of the carbon dioxide produced, in accordance with ISO 437. It does not cover the preparation of samples for carbon determination by physical methods, such as metallography or spectroscopy.
Sintermetalle, ausgenommen Hartmetalle - Vorbereitung von Proben für die chemische Analyse zur Bestimmung des Kohlenstoffgehaltes (ISO 7625:2012)
Diese Internationale Norm legt Verfahren für die Vorbereitung einer Probe aus einem oder mehreren Sinterteilen aus Materialien fest, die auf den ungebundenen oder gesamten Kohlenstoffgehalt zu analysieren sind. Gebundener Kohlenstoff wird als Differenz zwischen dem gesamten und dem ungebundenen Kohlenstoff bestimmt. Diese Norm enthält die Vorbereitung von Proben für die Bestimmung des Kohlenstoffes durch ein chemisches Verfahren, d. h. Verbrennung in Sauerstoff und Messung des auftretenden Kohlendioxids nach ISO 437. Sie enthält nicht die Vorbereitung von Proben für die Bestimmung des Kohlenstoffes durch physikalische Verfahren, wie z. B. Metallographie oder Spektroskopie.
Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des échantillons pour analyse chimique en vue du dosage du carbone (ISO 7625:2012)
L'ISO 7625:2012 spécifie une méthode de préparation d'un échantillon à partir d'un ou de plusieurs fragments frittés de matériaux à analyser en vue de la détermination de leur teneur en carbone libre ou total. Le carbone combiné est déterminé par différence entre la teneur en carbone total et celle en carbone libre. L'ISO 7625:2012 concerne la préparation des échantillons pour le dosage du carbone au moyen d'une méthode chimique, à savoir par combustion dans l'oxygène et mesurage de la quantité de dioxyde de carbone formé, conformément à l'ISO 437. Elle ne concerne pas la préparation d'échantillons en vue du dosage du carbone par des méthodes physiques, telles que la métallographie ou la spectroscopie.
Sintrane kovine brez trdin - Priprava vzorcev za kemično analizo za določevanje ogljika (ISO 7625:2012)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7625:2014
01-marec-2014
1DGRPHãþD
SIST EN ISO 7625:2010
6LQWUDQHNRYLQHEUH]WUGLQ3ULSUDYDY]RUFHY]DNHPLþQRDQDOL]R]DGRORþHYDQMH
RJOMLND,62
Sintered metal materials, excluding hardmetals - Preparation of samples for chemical
analysis for determination of carbon content (ISO 7625:2012)
Sintermetalle, ausgenommen Hartmetalle - Vorbereitung von Proben für die chemische
Analyse zur Bestimmung des Kohlenstoffgehaltes (ISO 7625:2012)
Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des
échantillons pour analyse chimique en vue du dosage du carbone (ISO 7625:2012)
Ta slovenski standard je istoveten z: EN ISO 7625:2012
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 7625:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7625:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 7625:2014
EUROPEAN STANDARD
EN ISO 7625
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2012
ICS 77.160 Supersedes EN ISO 7625:2010
English Version
Sintered metal materials, excluding hardmetals - Preparation of
samples for chemical analysis for determination of carbon
content (ISO 7625:2012)
Matériaux métalliques frittés, à l'exclusion des métaux-durs Sintermetalle, ausgenommen Hartmetalle - Vorbereitung
- Préparation des échantillons pour analyse chimique en von Proben für die chemische Analyse zur Bestimmung
vue du dosage du carbone (ISO 7625:2012) des Kohlenstoffgehaltes (ISO 7625:2012)
This European Standard was approved by CEN on 1 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7625:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7625:2014
EN ISO 7625:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7625:2014
EN ISO 7625:2012 (E)
Foreword
This document (EN ISO 7625:2012) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the
latest by May 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7625:2010.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7625:2012 has been approved by CEN as a EN ISO 7625:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 7625:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 7625:2014
INTERNATIONAL ISO
STANDARD 7625
Third edition
2012-11-15
Sintered metal materials, excluding
hardmetals — Preparation of
samples for chemical analysis for
determination of carbon content
Matériaux métalliques frittés, à l’exclusion des métaux-durs —
Préparation des échantillons pour analyse chimique en vue du
dosage du carbone
Reference number
ISO 7625:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 7625:2014
ISO 7625:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7625:2014
ISO 7625:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7625 was prepared by Technical Committee ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.