SIST EN 14219:2004
(Main)Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
This European Standard specifies the characteristics of hexagon bolts with flange with metric fine pitch thread, small series, with product grade A, with nominal thread diameters from 8 mm up to and including 16 mm and property classes 8.8, 9.8, 10.9, 12.9 and A2-70.
If, in special cases, specifications other than those listed in this European Standard are required, they shall be selected from existing European and International Standards, for example ISO 261 ISO 724, ISO 888, EN ISO 898-1, ISO 965-2, EN ISO 3506-1.
Sechskantschrauben mit Flansch mit Feingewinde - Leichte Reihe (ISO 15072:1999, modifiziert)
Diese Europäische Norm legt die Eigenschaften von Sechskantschrauben mit Flansch mit metrischem Feingewinde, leichte Reihe, mit Produktklasse A, mit Gewinde-Nenndurchmessern von 8 mm bis 16 mm und mit Festigkeitsklassen 8.8, 10.9, 12.9 und A2-70 fest.
Wenn, in besonderen Fällen, andere Festlegungen als die in dieser Europäischen Norm benötigt werden, sollten sie den bestehenden Europäischen und Internationalen Normen, z. B. ISO 724, ISO 888,
EN ISO 898-1, ISO 965-2, EN ISO 3506-1, entnommen werden.
Vis a tete hexagonale a embase cylindro-tronçonique a pas fin - Série étroite (ISO 15072:1999, modifiée)
Šestroba glava vijaka s krajcem in metričnim finim navojem - Lahka izvedba (ISO 15072:1999, dopolnjen)
General Information
- Status
- Published
- Publication Date
- 31-Dec-2003
- Technical Committee
- ISEL - Mechanical elements
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-2004
- Due Date
- 01-Jan-2004
- Completion Date
- 01-Jan-2004
Relations
- Effective Date
- 06-Jul-2007
Overview
SIST EN 14219:2004 is a European Standard established by CEN that specifies the technical characteristics and dimensions of hexagon bolts with flange featuring metric fine pitch threads, particularly for small series production. These bolts adhere to product grade A and cover nominal thread diameters ranging from 8 mm to 16 mm. The standard includes property classes 8.8, 9.8, 10.9, 12.9, and A2-70, catering to various mechanical strength and corrosion resistance requirements.
This standard is based on and modifies ISO 15072:1999, adapting critical dimensions and options-such as a wider wrench size for M12 bolts and an additional coating alternative under ISO 10683. It applies across CEN member countries including Austria, Germany, France, the United Kingdom, and many others, ensuring harmonized manufacturing and quality expectations for hexagon flange bolts with fine metric threads.
Key Topics
Product Scope
Covers hexagon flange bolts with metric fine pitch threads designed for small batch production. Size range: M8 to M16 thread diameter.Mechanical Properties and Grades
Specifies property classes 8.8, 9.8 (with some deletions in modifications), 10.9, 12.9, and stainless steel grade A2-70 for corrosion resistance.Dimensional Tolerances and Thread Specifications
Dimensions follow exact figures and tolerances detailed in the standard, referencing EN 20225 for symbols and ISO 261, ISO 724, and ISO 965-2 for metric thread profiles and limits.Surface Finish and Coatings
Included finishes are plain, black oxide (chemical or thermal), and non-electrolytically applied zinc flake coatings per ISO 10683, providing options for corrosion protection.Gauging and Inspection
Annex A provides normative guidelines for accurate gauging of flange head dimensions to ensure compliance with height, thickness, and correct fit.Compatibility and Cross-reference Standards
Includes references and alignment with ISO standards like ISO 898-1 for mechanical properties, EN ISO 3506-1 for stainless steels, and EN ISO 3269 for acceptance inspection processes.
Applications
Mechanical Engineering and Assembly
Ideal for precision assemblies requiring fine threading, such as automotive, aerospace, and heavy machinery components, where small production runs are common.Corrosion-Resistant Fastening
Stainless steel variants (A2-70) suit environments demanding high corrosion resistance, such as marine or chemical industry applications.Custom Bolt Solutions
The standard permits modified designs like reduced shank versions or undercut heads, providing flexibility for special engineering requirements.Quality Assurance in Manufacturing
Adoption of EN 14219 ensures consistent quality through defined properties, dimensional accuracy, and reliable inspection procedures, crucial for supply chain standardization.
Related Standards
ISO 15072:1999
Original international standard governing hexagon flange bolts with metric fine pitch thread, modified within EN 14219 to accommodate European needs.ISO 261, ISO 724, ISO 965-2
Standards related to metric screw thread dimensions, pitches, and tolerances, forming the foundation for thread specification in EN 14219.EN ISO 898-1
Specifies mechanical properties for carbon and alloy steel bolts, screws, and studs, referenced for property classification.EN ISO 3506-1
Focuses on mechanical properties for corrosion-resistant stainless steel fasteners.EN ISO 10683
Covers non-electrolytically applied zinc flake coatings used as a surface treatment option per EN 14219.EN ISO 3269
Provides acceptance inspection procedures to ensure product conformity based on sampling and gauging practices.
By complying with SIST EN 14219:2004, manufacturers and users of hexagon bolts with flange and metric fine pitch threads can ensure harmonized quality and performance across European markets and beyond. This standard enhances interoperability, supports precise mechanical applications, and offers a robust basis for both small series production and specialized fastening solutions.
Frequently Asked Questions
SIST EN 14219:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)". This standard covers: This European Standard specifies the characteristics of hexagon bolts with flange with metric fine pitch thread, small series, with product grade A, with nominal thread diameters from 8 mm up to and including 16 mm and property classes 8.8, 9.8, 10.9, 12.9 and A2-70. If, in special cases, specifications other than those listed in this European Standard are required, they shall be selected from existing European and International Standards, for example ISO 261 ISO 724, ISO 888, EN ISO 898-1, ISO 965-2, EN ISO 3506-1.
This European Standard specifies the characteristics of hexagon bolts with flange with metric fine pitch thread, small series, with product grade A, with nominal thread diameters from 8 mm up to and including 16 mm and property classes 8.8, 9.8, 10.9, 12.9 and A2-70. If, in special cases, specifications other than those listed in this European Standard are required, they shall be selected from existing European and International Standards, for example ISO 261 ISO 724, ISO 888, EN ISO 898-1, ISO 965-2, EN ISO 3506-1.
SIST EN 14219:2004 is classified under the following ICS (International Classification for Standards) categories: 21.040.10 - Metric screw threads; 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14219:2004 has the following relationships with other standards: It is inter standard links to SIST EN 14219:2004/AC:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14219:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sechskantschrauben mit Flansch mit Feingewinde - Leichte Reihe (ISO 15072:1999, modifiziert)Vis a tete hexagonale a embase cylindro-tronçonique a pas fin - Série étroite (ISO 15072:1999, modifiée)Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studs21.040.10Metrski navojiMetric screw threadsICS:Ta slovenski standard je istoveten z:EN 14219:2003SIST EN 14219:2004en01-januar-2004SIST EN 14219:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14219April 2003ICS 21.060.10English versionHexagon bolts with flange with metric fine pitch thread - Smallseries (ISO 15072:1999, modified)Vis à tête hexagonale à embase cylindro-tronçonique à pasfin - Série étroite (ISO 15072:1999, modifiée)Sechskantschrauben mit Flansch mit Feingewinde - LeichteReihe (ISO 15072:1999, modifiziert)This European Standard was approved by CEN on 14 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14219:2003 ESIST EN 14219:2004
Symbols and designations of dimensions are specified in EN 20225.KeyaThe top of the head shall be either full form or indented at the manufacturer's discretion option and shall be either cham-fered or rounded. The minimum diameter of the chamfer circle or start of rounding shall be equal to the maximum width across flats minus 15 %. If the top of the head is indented, the periphery may be rounded.bEdge contour opti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...