SIST EN 2713-011:2009
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
This standard specifies the characteristics of UV laser printable, single and multicore silver plated copper screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 011: Versilbertes Kupfer, geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - Produktnorm
Diese Norm legt die Eigenschaften von UV Laser bedruckbaren, ein und mehradrigen, geschirmten (Umseilung) und ummantelten elektrischen Leitungen aus versilbertem Kupfer fest, die zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen 55 °C und 200 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung oder Tintenstrahldruck zu kennzeichnen. Diese Kennzeichnungen müssen EN 3838 entsprechen.
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 011 : Cuivre argenté, blindés (guipés) et gainés, marquables au laser UV - Norme de produit
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 200 °C - 011. del: Posrebren baker, oklopljen (spirala) in oplaščen, z možnostjo UV-laserskega tiskanja - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 19-Apr-2009
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Apr-2009
- Due Date
- 11-Jun-2009
- Completion Date
- 20-Apr-2009
Overview
SIST EN 2713-011:2009 is a European aerospace standard developed by CEN that specifies the requirements for single and multicore electrical cables with silver-plated copper screening and specialized jackets. Designed for use in the on-board electrical systems of aircraft, these cables operate reliably at extreme temperatures ranging from -55 °C up to 200 °C. A key feature of this standard is the requirement for cables to be UV laser printable, allowing precise and durable marking essential for aerospace applications. The standard also supports marking by hot stamp or ink jet printing in accordance with EN 3838, ensuring traceability and compliance with identification protocols.
Key Features
- Electrical cable types: Single and multicore cables with 1 to 4 cores, spiral silver-plated copper stranded screening, and protective outer jackets.
- Operating temperature range: Suitable for extreme environments, functioning between -55 °C and 200 °C.
- Materials and construction:
- Core conductors use dispersion fluorocarbon top coat insulation per EN 2266-003.
- Silver-plated copper spiral screen strands meet EN 2083 criteria.
- Outer jacket constructed with polyimide layers coated with fluorocarbon to enable UV laser marking.
- Marking compatibility:
- UV laser printable surface for clear, durable cable identification.
- Also compatible with hot stamp printing and ink jet printing technologies following EN 3838.
- Testing and requirements: Compliant with extensive tests including electrical resistance, insulation, flammability, abrasion resistance, and adherence of plating per EN 3475 series.
- Quality assurance measures: Guided by aerospace quality management and part qualification processes per EN 9133.
Practical Applications
EN 2713-011 cables are essential components in aerospace electrical systems where reliability, precision, and traceability are paramount. Applications include:
- Aircraft wiring harnesses: Ensuring safe, stable power distribution and signal transmission in critical flight systems.
- On-board avionics: Providing robust electrical connections with minimal interference due to effective spiral screening.
- High-temperature zones: Suitable for installation near engines or heat-emitting components where standard cables would fail.
- Maintenance and inspection: UV laser printable surface supports long-lasting, legible markings that improve identification during routine servicing, upgrades, or troubleshooting.
- Custom aerospace builds: The standard's strict material and construction requirements support system designers in conforming to rigorous aerospace regulations.
Related Standards
- EN 3838: Defines requirements and tests for user-applied markings on aerospace electrical cables.
- EN 2266-003: Product standard for ink jet printable general-purpose cables similar in temperature rating but different marking techniques.
- EN 2235: Technical specification for screened and jacketed aerospace cables.
- EN 2083: Product standard for copper and copper alloy conductors used in aerospace cables.
- EN 3475 series: Test methods covering electrical, mechanical, and environmental endurance for aerospace cables.
- EN 9133: Quality management system and qualification procedures for aerospace standard parts.
This standard sets a robust framework for aerospace cable manufacturers and designers seeking to meet advanced electrical performance, environmental resistance, and marking traceability requirements. Its emphasis on UV laser printability and thermal endurance up to 200 °C makes SIST EN 2713-011:2009 a critical reference for high-performance, general-purpose electrical cables in the aviation sector.
Frequently Asked Questions
SIST EN 2713-011:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard". This standard covers: This standard specifies the characteristics of UV laser printable, single and multicore silver plated copper screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
This standard specifies the characteristics of UV laser printable, single and multicore silver plated copper screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
SIST EN 2713-011:2009 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2713-011:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RGLuft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 011: Versilbertes Kupfer, geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 011 : Cuivre argenté, blindés (guipés) et gainés, marquables au laser UV - Norme de produitAerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2713-011:2006SIST EN 2713-011:2009en,de01-junij-2009SIST EN 2713-011:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2713-011
July 2006 ICS 49.060 English Version
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 011 : Cuivre argenté, blindés (guipés) et gainés, marquables au laser UV - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 011: Versilbertes Kupfer, geschirmt (Umseilung) und ummantelt, UV Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 6 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2713-011:2006: ESIST EN 2713-011:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...