iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 17873:2024

(Main)

Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing

Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing

This document specifies instructions for mounting and fixing for reaction to fire testing of factory-made
underlays for discontinuous roof coverings and walls and contains provisions for direct and extended
application rules.
These mounting and fixing procedures are not intended to be used for flat roofed waterproofing
applications.

Abdichtungsbahnen - Unterdeck- und Unterspannbahnen für Dachdeckungen und Wände - Anleitung für Befestigung und Montage für die Prüfung zum Brandverhalten

Dieses Dokument legt Anleitungen für Befestigung und Montage für die Prüfung zum Brandverhalten von industriell gefertigten Unterdeck- und Unterspannbahnen für Dachdeckungen und Wände fest und enthält Festlegungen für direkte und erweiterte Anwendungsregeln.

Feuilles souples d'étanchéité - Écrans souples de sous-toiture pour couverture en petits éléments discontinus et écrans souples pour murs extérieurs - Instructions de montage et de fixation pour l’essai de réaction au feu

Le présent document spécifie des instructions de montage et de fixation pour l’essai de réaction au feu des écrans souples de sous-toiture pour couverture en petits éléments discontinus et des écrans souples de murs extérieurs manufacturés. Il contient également des dispositions relatives aux règles d’applications directe et étendue.

Hidroizolacijski trakovi - Podložne folije za strešne kritine in stene - Navodila za montažo in pritrditev za požarno testiranje

Ta dokument določa navodila za vgradnjo in pritrjevanje za požarno testiranje tovarniško izdelane folije za strešne kritine in stene in vsebuje določila za neposredna in razširjena navodila v zvezo z uporabo.
Ti postopki vgradnje in pritrjevanja niso namenjeni za uporabo pri hidroizolaciji ravne strehe.

General Information

Status
Published
Public Enquiry End Date
29-Sep-2022
Publication Date
12-Feb-2024
ICS
13.220.50 - Fire-resistance of building materials and elements
91.100.50 - Binders. Sealing materials
Technical Committee
VLA - Water proofing
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Jan-2024
Due Date
18-Mar-2024
Completion Date
13-Feb-2024
Ref Project
EN 17873:2023 - Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing

Buy Standard

EN 17873:2024EN 17873:2024
PreviousNext
Standard
EN 17873:2024
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17873:2024
01-marec-2024
Hidroizolacijski trakovi - Podložne folije za strešne kritine in stene - Navodila za
montažo in pritrditev za požarno testiranje
Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls -
Instructions for mounting and fixing for reaction to fire testing
Abdichtungsbahnen - Unterdeck- und Unterspannbahnen für Dachdeckungen und
Wände - Anleitung für Befestigung und Montage für die Prüfung zum Brandverhalten
Feuilles souples d'étanchéité - Écrans souples de sous-toiture pour couverture en petits
éléments discontinus et écrans souples pour murs extérieurs - Instructions de montage
et de fixation pour l’essai de réaction au feu
Ta slovenski standard je istoveten z: EN 17873:2023
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 17873:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17873:2024

---------------------- Page: 2 ----------------------
SIST EN 17873:2024


EN 17873
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 13.220.50; 91.100.50
English Version

Flexible sheets for waterproofing - Underlays for
discontinuous roof coverings and walls - Instructions for
mounting and fixing for reaction to fire testing
Feuilles souples d'étanchéité - Écrans souples de sous- Abdichtungsbahnen - Unterdeck- und
toiture pour couverture en petits éléments discontinus Unterspannbahnen für Dachdeckungen und Wände -
et écrans souples pour murs extérieurs - Instructions Anleitung für Befestigung und Montage für die Prüfung
de montage et de fixation pour l'essai de réaction au zum Brandverhalten
feu
This European Standard was approved by CEN on 20 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17873:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17873:2024
EN 17873:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 6
5 Instructions for mounting and fixing of test specimens . 7
5.1 General . 7
5.2 Product and installation parameters . 7
5.3 Mounting and fixing .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1366-4:2021(Main)
Fire resistance tests for service installations - Part 4: Linear joint seals
EN 1366-4:2021

This document specifies a method for determining the fire resistance of linear joint seals based on their intended end use. This document is used in conjunction with EN 1363-1.
The following tests are included in this document:
-   no mechanically induced movement;
-   mechanically induced movement.
This document does not provide quantitative information on the rate of leakage of smoke and/or hot gases, or on the transmission or generation of fumes.
The load-bearing capacity of a linear joint seal is not addressed in this document.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14187-7:2019(Main)
Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame
EN 14187-7:2019

This draft European Standard specifies a test method for determination of the resistance to flame of cold applied joint sealants for use in joints in roads, air fields and other trafficked areas.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15882-4:2012(Main)
Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
EN 15882-4:2012

This European standard prescribes the methodology and specifies rules for the preparation of extended application reports for linear joint sealing systems tested in accordance with EN 1366-4. The field of the extended application reports is additional to the direct field of application given within EN 1366-4 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application.
Mechanical metal seals are not part of the scope of this European standard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 14187-7:2014(Main)
Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame
prEN 14187-7

This European Standard specifies a test method for determination of the resistance to flame of cold applied joint sealants for use in joints in roads, air fields and other trafficked areas.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 45545-3:2024

This part of EN 45545 specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this part of EN 45545, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this part of EN 45545. It is not within the scope of this part of EN 45545 to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CEN/CLC Guide 25:2024(Main)
The concept of Cooperation with European Organizations and other stakeholders
CEN/CLC Guide 25:2024
  • Guide
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-716:2024(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations - ELV DC power distribution over information and communications technology (ICT) cable infrastructure (IEC 60364-7-716:2023)
HD 60364-7-716:2023

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61970-302:2024(Main)
Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) dynamics (IEC 61970-302:2024)
EN IEC 61970-302:2024

IEC 61970-302:2024 specifies a Dynamics package which contains part of the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability) or transient stability of a power system as defined by IEEE / CIGRE, Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions.
The model descriptions in this document provide specifications for each type of dynamic model as well as the information that needs to be included in dynamic case exchanges between planning/study applications.
The scope of the CIM Dynamics package specified in this document includes:
• standard models: a simplified approach to describing dynamic models, where models representing dynamic behaviour of elements of the power system are contained in predefined libraries of classes which are interconnected in a standard manner. Only the names of the selected elements of the models along with their attributes are needed to describe dynamic behaviour.
• proprietary user-defined models: an approach providing users the ability to define the parameters of a dynamic behaviour model representing a vendor or user proprietary device where an explicit description of the model is not provided by this document. The same libraries and standard interconnections are used for both proprietary user-defined models and standard models. The behavioural details of the model are not documented in this document, only the model parameters.
• A model to enable exchange of models’ descriptions. This approach can be used to describe user defined and standard models.
• A model to enable exchange of simulation results.
This second edition cancels and replaces the first edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The majority of issues detected in IEC 61970-302:2018 are addressed;
b) IEEE 421.5-2016 on Excitation systems is fully covered;
c) The IEEE turbine report from 2013 was considered and as a result a number of gas, steam and hydro turbines/governors are added;
d) IEC 61400-27-1:2020 on wind turbines is fully incorporated;
e) WECC Inverter-Based Resource (IBR) models, Hybrid STATCOM models and storage models are added;
f) The user defined models are enhanced with a model which enables modelling of detailed dynamic model;
g) A model to enable exchange of simulation results is added;
h) The work on the HVDC models is not complete. The HVDC dynamics models are a complex domain in which there are no models that are approved or widely recognised on international level, i.e. there are only project-based models. At this stage IEC 61970-302:2022 only specifies some general classes. However, it is recognised that better coverage of HVDC will require a further edition of this document;
i) Models from IEEE 1547-2018 "IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces" are added.
j) Statements have been added to certain figures, tables, schemas, and enumerations throughout the document that indicate that they are reproduced with the permission of the UCA International User Group (UCAIug). These items are derived from the CIM.

  • Standard
    894 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-2-23:2024(Main)
Optical fibre cables - Part 2-23: Indoor cables - Detail specification for multi-fibre cables for use in MPO connector terminated cable assemblies (IEC 60794-2-23:2024)
EN IEC 60794-2-23:2024

IEC 60794-2-23: 2024 is a detail specification and specifies indoor multi-fibre cables for use in MPO (multi-fibre push on) connector terminated cable assemblies.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-1-311:2024(Main)
Optical fibre cables - Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, Method G11A (IEC 60794-1-311:2024)
EN IEC 60794-1-311:2024

IEC 60794-1-311:2024 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property – tensile strength and elongation at break. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.
This document partially cancels and replaces IEC 60794-1-23:2019. This edition includes the following significant technical changes with respect to IEC 60794‑1‑23:2019:
a) The information about dumb-bells is removed because this is not used for testing cable elements;
b) the parameters strain at yield and E modulus are added in 5.7.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day