SIST EN 15010:2007
(Main)Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
This European Standard defines the critical dimensions of the location of the 25,4 mm aperture relative to the base of aerosol cans for clinching with valve cups.
The specification of the fundamental dimensions in this standard, relates to all 25,4 mm aperture aluminium and aluminium alloy cans, irrespective of size, shape and mode of manufacture; whose dimensions and tolerances fall within the dimensional scope of EN 15008.
Aerosolpackungen - Aluminiumbehälter - Toleranzen der Grundmaße im Zusammenhang mit dem Clinch
Diese Europäische Norm legt die kritischen Maße hinsichtlich der Lage der 25,4 mm weiten Öffnung in Bezug
auf den Boden von Aerosoldosen fest, die für das Aufclinchen von Ventilträgern geeignet sind.
Die in dieser Norm festgelegten Grundmaße beziehen sich ohne Berücksichtigung von Größe, Form und
Herstellungsverfahren auf alle Behälter aus Aluminium und Aluminiumlegierungen mit 25,4 mm weiten
Öffnungen, deren Maße und Toleranzen in den Abmessungsbereich von prEN 15008 fallen.
Récipients pour aérosols - Récipients en aluminium - Tolérances des dimensions de base en rapport avec le dudgeonnage
Embalaža za aerosole – Posode iz aluminija – Dovoljena odstopanja osnovnih mer v povezavi z objemko (clinch)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža za aerosole – Posode iz aluminija – Dovoljena odstopanja osnovnih mer v povezavi z objemko (clinch)Aerosolpackungen - Aluminiumbehälter - Toleranzen der Grundmaße im Zusammenhang mit dem ClinchRécipients pour aérosols - Récipients en aluminium - Tolérances des dimensions de base en rapport avec le dudgeonnageAerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch77.150.10Aluminijski izdelkiAluminium products55.130Aerosol containersICS:Ta slovenski standard je istoveten z:EN 15010:2006SIST EN 15010:2007en,fr,de01-april-2007SIST EN 15010:2007SLOVENSKI
STANDARD
SIST EN 15010:2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15010October 2006ICS 55.130 English VersionAerosol containers - Aluminium containers - Tolerances of thefundamental dimensions in connection with the clinchRécipients pour aérosols - Récipients en aluminium -Tolérances des dimensions de base en rapport avec ledudgeonnageAerosolpackungen - Aluminiumbehälter - Toleranzen derGrundmaße im Zusammenhang mit dem ClinchThis European Standard was approved by CEN on 6 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15010:2006: ESIST EN 15010:2007
EN 15010:2006 (E) 2 Foreword This document (EN 15010:2006) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007. This draft European Standard is one of a series of thirteen related standards with the following titles: EN 14847, Aerosol containers — Tinplate containers — Dimensions of the 25,4 mm aperture EN 14848, Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.