SIST EN 60455-3-8:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Reaktionsharzmassen für die Elektroisolierung – Teil 3: Anforderungen an einzelne Werkstoffe
Blatt 8: Reaktionsharzmassen für KabelgarniturenComposés réactifs à base de résines utilisés comme isolants électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 8: Résines pour accessoires de câblResin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories29.035.99Drugi izolacijski materialiOther insulating materialsICS:Ta slovenski standard je istoveten z:EN 60455-3-8:2013SIST EN 60455-3-8:2013en01-september-2013SIST EN 60455-3-8:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60455-3-8 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60455-3-8:2013 E
ICS 29.035.01
English version
Resin based reactive compounds used for electrical insulation -
Part 3: Specifications for individual materials -
Sheet 8: Resins for cable accessories (IEC 60455-3-8:2013)
Composés réactifs à base de résines utilisés comme isolants électriques -
Partie 3: Spécifications pour matériaux particuliers -
Feuille 8: Résines pour accessoires de câble (CEI 60455-3-8:2013)
Reaktionsharzmassen für die Elektroisolierung – Teil 3: Anforderungen an einzelne Werkstoffe – Blatt 8: Reaktionsharzmassen für Kabelgarnituren (IEC 60455-3-8:2013)
This European Standard was approved by CENELEC on 2013-06-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60455-3-8:2013 was approved by CENELEC as a European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60455-1 IEC 60455-3 series IEC 61234-2 ISO 291 ISO 2592 ISO 3521 NOTE
Harmonized as EN 60455-1. NOTE
Harmonized in EN 60455-3 series (not modified). NOTE
Harmonized as EN 61234-2. NOTE
Harmonized as EN ISO 291. NOTE
Harmonized as EN ISO 2592. NOTE
Harmonized as EN ISO 3521. SIST EN 60455-3-8:2013

- 3 - EN 60455-3-8:2013 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60093 - Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials HD 429 S11)
-
IEC 60212 - Standard conditions for use prior to and during the testing of solid electrical insulating materials EN 60212 -
IEC 60243-1 - Electrical strength of insulating materials - Test methods -
Part 1: Tests at power frequencies EN 60243-1 -
IEC 60250 - Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths - -
IEC 60455-2 - Resin based reactive compounds used for electrical insulation -
Part 2: Methods of test EN 60455-2 -
ISO 179 Series Plastics - Determination of Charpy impact properties
EN ISO 179 Series
ISO 527 Series Plastics - Determination of tensile properties
EN ISO 527 Series
ISO 868 - Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) EN ISO 868 -
ISO 1183-1 - Plastics - Methods for determining the density of non-cellular plastics -
Part 1: Immersion method, liquid pyknometer method and titration method EN ISO 1183-1 -
ISO 2555 - Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method EN ISO 2555 -
ISO 4895 - Plastics - Liquid epoxy resins - Determination of tendency to crystallize
EN ISO 4895 -
1) HD 429 S1 is superseded by EN 62631-1:2011, which is based on IEC 62631-1:2011. SIST EN 60455-3-8:2013

IEC 60455-3-8 Edition 1.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Resin based reactive compounds used for electrical insulation –
Part 3: Specifications for individual materials Sheet 8: Resins for cable accessories
Composés réactifs à base de résines utilisés comme isolants électriques –
Partie 3: Spécifications pour matériaux particuliers Feuille 8: Résines pour accessoires de câble
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 29.035.01 PRICE CODE CODE PRIX ISBN 978-2-83220-758-1
– 2 – 60455-3-8 © IEC:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Designation . 7 5 Type testing . 7 5.1 General . 7 5.2 Sampling . 8 5.3 Preparation and conditioning . 8 5.3.1 General . 8 5.3.2 Individual components prior to mixing . 8 5.3.3 Resin just after mixing (curing stage) . 8 5.3.4 Cured resin (original) . 8 5.3.5 Cured resin after thermal ageing (dry and wet) . 8 5.4 Sequence of tests . 8 5.5 Test report . 9 6 Test methods . 9 7 Information on supply, packaging, marking and labelling . 12 7.1 Packaging . 12 7.2 Marking and labelling . 12 7.2.1 General . 12 7.2.2 Components . 12 7.2.3 Accessory kit . 12 Bibliography . 13
Table 1 – Categories of resins . 7 Table 2 – Type tests: test methods and requirements . 10
60455-3-8 © IEC:2013 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
RESIN BASED REACTIVE COMPOUNDS
USED FOR ELECTRICAL INSULATION –
Part 3: Specifications for individual materials Sheet 8: Resins for cable accessories
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60455-3-8 has been prepared by IEC technical committee 15: Solid electrical insulating materials, in collaboration with working group 11 of Cenelec technical committee 20. The text of this standard is based on the following documents: FDIS Report on voting 15/701/FDIS 15/711/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN 60455-3-8:2013

– 4 – 60455-3-8 © IEC:2013 A list of all the parts in the IEC 60455 series, published under the general title Resin based reactive compounds used for electrical insulation, can be found on the IEC website. The committee has decided that the contents
...