SIST EN ISO 16147:2017
(Main)Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002)
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002)
ISO 16147:2002 establishes requirements for the design and installation of engine-mounted fuel and electrical components on diesel inboard-mounted engines for minimizing fuel leakage and the risk of and/or the spread of fire on small craft of hull length up to 24 m.
Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff- und Elektrikbauteile (ISO 16147:2002)
N/A
Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation et des systèmes électriques fixés sur le moteur (ISO 16147:2002)
L'ISO 16147:2002 établit les exigences relatives à la conception et à la pose des éléments des circuits d'alimentation et des systèmes électriques pour moteurs intérieurs diesel, afin de réduire le plus possible les fuites de carburant et le risque d'incendie et/ou de propagation du feu sur les navires de plaisance d'une longueur de coque maximale de 24 m.
Mala plovila - Vgrajeni dizelski motorji - Nameščene komponente za gorivo in elektriko (ISO 16147:2002)
Standard ISO 16147:2002 določa zahteve za načrtovanje in namestitev komponent za gorivo in elektriko, nameščenih v vgrajenih dizelskih motorjih, za zmanjševanje uhajanja goriva ter tveganja za požar in/ali širjenje požara na malih plovilih z dolžino trupa do 24 m.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16147:2017
01-oktober-2017
1DGRPHãþD
SIST EN ISO 16147:2003
SIST EN ISO 16147:2003/A1:2013
0DODSORYLOD9JUDMHQLGL]HOVNLPRWRUML1DPHãþHQHNRPSRQHQWH]DJRULYRLQ
HOHNWULNR ,62
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components
(ISO 16147:2002)
Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff-
und Elektrikbauteile (ISO 16147:2002)
Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation et des
systèmes électriques fixés sur le moteur (ISO 16147:2002)
Ta slovenski standard je istoveten z: EN ISO 16147:2017
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
SIST EN ISO 16147:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16147:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 16147:2017
EN ISO 16147
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 16147:2002
English Version
Small craft - Inboard diesel engines - Engine-mounted fuel
and electrical components (ISO 16147:2002)
Petits navires - Moteurs intérieurs diesels - Éléments Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren -
des circuits d'alimentation et des systèmes électriques Am Motor befestigte Kraftstoff- und Elektrikbauteile
fixés sur le moteur (ISO 16147:2002) (ISO 16147:2002)
This European Standard was approved by CEN on 16 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16147:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16147:2017
EN ISO 16147:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16147:2017
EN ISO 16147:2017 (E)
European foreword
The text of ISO 16147:2002 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 16147:2017.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16147:2002.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16147:2002 has been approved by CEN as EN ISO 16147:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16147:2017
EN ISO 16147:2017 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU
This European standard has been prepared under a mandate given to CEN by the European Commission
to provide one means of conforming to Essential Requirements of the New Approach Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive and has
been implemented as a national standard in at least one member state, compliance with the normative
clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the relevant Essential Requirements of that Directive and associated
EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2013/53/EU
Clauses/subclauses of this Essential requirements (ERs) of Qualifying remarks/Notes
European Standard EU Directive 2013/53/EU
4; 5; 6 I.A.5.1.1 - Installation requirements; In respect of fuel and electrical
inboard engine components fitted to diesel
inboard-mounted engines.
4; 5 I.A.5.2.1 - Fuel system; general In respect of minimising the risk of
fuel leakage and risk/spread of fire
from fuel components that are
engine mounted.
Fire resistant fuel hoses meeting
the requirements of EN ISO 7840
deal with the use of biofuels.
4; 6 I.A.5.3 - Electrical system In respect of minimising the
risk/spread of fire from electrical
components that are engine
mounted.
This Standard does not deal with
the following elements of this
essential requirement in
relation to engine mounted
electrical components:
— AC electrical engine-
mounted components;
— Protection from electric
shock;
— Overload and short circuit
protection;
— Interaction with electric
propulsion circuits;
— Ventilation of explosive
4
---------------------- Page: 6 ----------------------
SIST EN ISO 16147:2017
EN ISO 16147:2017 (E)
gases emitted from
batteries;
— Battery installation.
4; 5; 6 I.A.5.6.1 Fire protection - General In respect of the design and
installation arrangements for
engine mounted fuel and electrical
components on inboard diesel
engines.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
5
---------------------- Page: 7 ----------------------
SIST EN ISO 16147:2017
---------------------- Page: 8 ----------------------
SIST EN ISO 16147:2017
INTERNATIONAL ISO
STANDARD 16147
First edition
2002-10-15
Small craft — Inboard diesel engines —
Engine-mounted fuel and electrical
components
Petits navires — Moteurs intérieurs diesels — Éléments des circuits
d'alimentation et des systèmes électriques fixés sur le moteur
Reference number
ISO 16147:2002(E)
©
ISO 2002
---------------------- Page: 9 ----------------------
SIST EN ISO 16147:2017
ISO 16147:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secr
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff- und Elektrikbauteile (ISO 16147:2002)Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation et des systèmes électriques fixés sur le moteur (ISO 16147:2002)Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002)47.080ýROQLSmall craft47.020.20Ladijski motorjiMarine engines and propulsion systemsICS:Ta slovenski standard je istoveten z:FprEN ISO 16147kSIST FprEN ISO 16147:2017en,fr,de01-junij-2017kSIST FprEN ISO 16147:2017SLOVENSKI
STANDARD
kSIST FprEN ISO 16147:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 16147
March
t r s y ICS
v yä r z r Will supersede EN ISO
s x s v yã t r r tEnglish Version
Small craft æ Inboard diesel engines æ Engineæmounted fuel Petits navires æ Moteurs intérieurs diesels æ Éléments des circuits d 5alimentation et des systèmes électriques
Kleine Wasserfahrzeuge æ Eingebaute Dieselmotoren æ Am Motor befestigte Kraftstoffæ und Elektrikbauteile This draft European Standard is submitted to CEN members for unique acceptance procedureä It has been drawn up by the
If this draft becomes a European Standardá CEN members are bounwhich stipulate the conditions for giving this European Standard the status of a national standard without any alterationä
This draft European Standard was established by CEN in three ofer language made by translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
Recipients of this draft are invited to submitá with their commentsá notification of any relevant patent rights of which they are aware and to provide supporting documentationä
Warning ã This document is not a European Standardä It is distributed for review and commentsä It is subject to change without notice and shall not be referred to as a European Standardä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä FprEN ISO
s x s v yã t r s y EkSIST FprEN ISO 16147:2017
FprEN ISO 16147:2017 (E) 2 Contents Page European foreword . 3 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2013/53/EU . 4
kSIST FprEN ISO 16147:2017
FprEN ISO 16147:2017 (E) 3 European foreword The text of ISO 16147:2002 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 16147:2017. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN ISO 16147:2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Endorsement notice The text of ISO 16147:2002 has been approved by CEN as FprEN ISO 16147:2017 without any modification. kSIST FprEN ISO 16147:2017
FprEN ISO 16147:2017 (E) 4 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2013/53/EU This European standard has been prepared under a mandate given to CEN by the European Commission to provide one means of conforming to Essential Requirements of the New Approach Directive 2013/53/EU. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one member state, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1: Correspondence between this European Standard and Directive 2013/53/EU Clauses/subclauses of this European Standard Essential requirements (ERs) of EU Directive 2013/53/EU Qualifying remarks/Notes 4; 5; 6 I.A.5.1.1 -
Installation requirements; inboard engine In respect of fuel and electrical components fitted to diesel inboard-mounted engines. 4; 5 I.A.5.2.1
- Fuel system;
general In respect of minimising the risk of fuel leakage and risk/spread of fire from fuel components that are engine mounted. Fire resistant fuel hoses meeting the requirements of EN ISO 7840 deal with the use of biofuels. 4; 6 I.A.5.3 - Electrical system In respect of minimising the risk/spread of fire from electrical components that are engine mounted. This Standard does not deal with the following elements of this essential requirement in relation to engine mounted electrical components: — AC electrical engine-mounted components; — Protection from electric shock; — Overload and short circuit protection; — Interaction with electric propulsion circuits; kSIST FprEN ISO 16147:2017
FprEN ISO 16147:2017 (E) 5 — Ventilation of explosive gases emitted from batteries; — Battery installation. 4; 5; 6 I.A.5.6.1 Fire protection - General In respect of the design and installation arrangements for engine mounted fuel and electrical components on inboard diesel engines.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard
kSIST FprEN ISO 16147:2017
kSIST FprEN ISO 16147:2017
Reference numberISO 16147:2002(E)© ISO 2002
INTERNATIONAL STANDARD ISO16147First edition2002-10-15Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components Petits navires — Moteurs intérieurs diesels — Éléments des circuits d'alimentation et des systèmes électriques fixés sur le moteur
kSIST FprEN ISO 16147:2017
ISO 16147:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.ch Web
www.iso.ch Printed in Switzerland
ii © ISO 2002 – A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.