SIST EN ISO 10318-1:2015/A1:2018
(Amendment)Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/Amd 1:2018)
Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/Amd 1:2018)
Geokunststoffe - Teil 1: Begriffe - Änderung 1 (ISO 10318-1:2015/Amd 1:2018)
Géosynthétiques - Partie 1: Termes et définitions - Amendement 1 (ISO 10318-1:2015/Amd 1:2018)
Geosintetika - 1. del: Izrazi in definicije - Dopolnilo 1 (ISO 10318-1:2015/Amd 1:2018)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10318-1:2015/A1:2018
01-oktober-2018
Geosintetika - 1. del: Izrazi in definicije - Dopolnilo 1 (ISO 10318-1:2015/Amd
1:2018)
Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/Amd
1:2018)
Geokunststoffe - Teil 1: Begriffe - Änderung 1 (ISO 10318-1:2015/Amd 1:2018)
Géosynthétiques - Partie 1: Termes et définitions - Amendement 1 (ISO 10318-
1:2015/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 10318-1:2015/A1:2018
ICS:
01.040.59 Tekstilna in usnjarska Textile and leather
tehnologija (Slovarji) technology (Vocabularies)
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 10318-1:2015/A1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10318-1:2015/A1:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 10318-1:2015/A1:2018
EN ISO 10318-1:2015/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2018
EUROPÄISCHE NORM
ICS 01.040.59; 59.080.70
English Version
Geosynthetics - Part 1: Terms and definitions -
Amendment 1 (ISO 10318-1:2015/Amd 1:2018)
Géosynthétiques - Partie 1: Termes et définitions - Geokunststoffe - Teil 1: Begriffe - Änderung 1 (ISO
Amendement 1 (ISO 10318-1:2015/Amd 1:2018) 10318-1:2015/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 10318-1:2015; it was approved by CEN on 15 June 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10318-1:2015/A1:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10318-1:2015/A1:2018
EN ISO 10318-1:2015/A1:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10318-1:2015/A1:2018
EN ISO 10318-1:2015/A1:2018 (E)
European foreword
This document (EN ISO 10318-1:2015/A1:2018) has been prepared by Technical Committee
ISO/TC 221 “Geosynthetics” in collaboration with Technical Committee CEN/TC 189 “Geosynthetics”
the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Sl
...
SLOVENSKI STANDARD
SIST EN ISO 10318-1:2015/oprA1:2016
01-oktober-2016
Geosintetika - 1. del: Izrazi in definicije - Dopolnilo 1
Geosynthetics - Part 1: Terms and definitions
Geokunststoffe - Teil 1: Begriffe
Géosynthétiques - Partie 1: Termes et définitions -- Amendement 1
Ta slovenski standard je istoveten z: EN ISO 10318-1:2015/prA1
ICS:
01.040.59 Tekstilna in usnjarska Textile and leather
tehnologija (Slovarji) technology (Vocabularies)
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 10318-1:2015/oprA1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10318-1:2015/oprA1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 10318-1:2015/oprA1:2016
DRAFT AMENDMENT
ISO 10318-1:2015/DAM 1
ISO/TC 221 Secretariat: BSI
Voting begins on: Voting terminates on:
2016-09-28 2016-12-20
Geosynthetics —
Part 1:
Terms and definitions
AMENDMENT 1
Géosynthétiques —
Partie 1: Termes et définitions
AMENDEMENT 1
ICS: 59.080.70; 01.040.59
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 10318-1:2015/DAM 1:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016
---------------------- Page: 3 ----------------------
SIST EN ISO 10318-1:2015/oprA1:2016
ISO 10318-1:2015/DAM 1:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 10318-1:2015/oprA1:2016
ISO 10318-1:2015/DAM
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.