SIST EN 50632-2-5:2016/A1:2021

SLOVENSKI STANDARD
SIST EN 50632-2-5:2016/oprA1:2021
01-maj-2021
Elektromotorna orodja - Postopek meritve prahu - 2-5. del: Posebne zahteve za
krožne žage - Dopolnilo A1
Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular
requirements for circular saws
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-5: Besondere
Anforderungen für Kreissägen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-5:
Exigences particulières pour les scies circulaires
Ta slovenski standard je istoveten z: EN 50632-2-5:2016/prA1
ICS:
25.100.40 Žagni listi Saws
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-5:2016/oprA1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-5:2016/oprA1:2021

---------------------- Page: 2 ----------------------
SIST EN 50632-2-5:2016/oprA1:2021

EUROPEAN STANDARD DRAFT
EN 50632-2-5:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
March 2021
ICS 13.040.40; 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-5: Particular requirements for circular saws
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-5: Exigences particulières pour les Teil 2-5: Besondere Anforderungen für Kreissägen
scies circulaires
This draft amendment prA1, if approved, will modify the European Standard EN 50632-2-5:2016; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2021-06-18.

It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 72582 Ref. No. EN 50632-2-5:2016/prA1 E

---------------------- Page: 3 ----------------------
SIST EN 50632-2-5:2016/oprA1:2021
EN 50632-2-5:2016/prA1:2021 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword .
...