SIST EN ISO 23208:2019/A1:2020
(Amendment)Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
Kryo-Behälter - Reinheit für den tiefkalten Betrieb - Änderung 1 (ISO 23208:2017/Amd 1:2020)
[Not available]
Récipients cryogéniques - Propreté en service cryogénique - Amendement 1 (ISO 23208:2017/Amd 1:2020)
Kriogene posode - Čistoča za obratovanje v kriogenem območju - Dopolnilo A1 (ISO 23208:2017/Amd 1:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 23208:2019/A1:2020
01-september-2020
Kriogene posode - Čistoča za obratovanje v kriogenem območju - Dopolnilo A1
(ISO 23208:2017/Amd 1:2020)
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO
23208:2017/Amd 1:2020)
Kryo-Behälter - Reinheit für den tiefkalten Betrieb - Änderung 1 (ISO 23208:2017/Amd
1:2020)
Récipients cryogéniques - Propreté en service cryogénique - Amendement 1 (ISO
23208:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 23208:2019/A1:2020
ICS:
23.020.40 Proti mrazu odporne posode Cryogenic vessels
(kriogenske posode)
SIST EN ISO 23208:2019/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 23208:2019/A1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 23208:2019/A1:2020
EN ISO 23208:2019/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 23.020.40
English Version
Cryogenic vessels - Cleanliness for cryogenic service -
Amendment 1 (ISO 23208:2017/Amd 1:2020)
Récipients cryogéniques - Propreté en service Kryo-Behälter - Reinheit für den tiefkalten Betrieb -
cryogénique - Amendement 1 (ISO 23208:2017/Amd Änderung 1 (ISO 23208:2017/Amd 1:2020)
1:2020)
This amendment A1 modifies the European Standard EN ISO 23208:2019; it was approved by CEN on 26 June 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23208:2019/A1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 23208:2019/A1:2020
EN ISO 23208:2019/A1:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 23208:2019/A1:2020
EN ISO 23208:2019/A1:2020 (E)
European foreword
This document (EN ISO 23208:2019/A1:2020) has been prepared by Technical Committee ISO/TC 220
"Cryogenic vessels" in collaboration with Technical Committee CEN/TC 268 “Cryogenic vessels and
specific hydrogen technologies applications” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a
...
SLOVENSKI STANDARD
SIST EN ISO 23208:2019/oprA1:2019
01-oktober-2019
Kriogene posode - Čistoča za obratovanje v kriogenem območju - Dopolnilo A1
(ISO 23208:2017/DAM 1:2019)
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO
23208:2017/DAM 1:2019)
Kryo-Behälter - Reinheit für den tiefkalten Betrieb - Änderung 1 (ISO 23208:2017/DAM
1:2019)
Récipients cryogéniques - Propreté en service cryogénique - Amendement 1 (ISO
23208:2017/DAM 1:2019)
Ta slovenski standard je istoveten z: EN ISO 23208:2019/prA1
ICS:
23.020.40 Proti mrazu odporne posode Cryogenic vessels
(kriogenske posode)
SIST EN ISO 23208:2019/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 23208:2019/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 23208:2019/oprA1:2019
DRAFT AMENDMENT
ISO 23208:2017/DAM 1
ISO/TC 220 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2019-09-06 2019-11-29
Cryogenic vessels — Cleanliness for cryogenic service
AMENDMENT 1
Récipients cryogéniques — Propreté en service cryogénique
AMENDEMENT 1
ICS: 23.020.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 23208:2017/DAM 1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
SIST EN ISO 23208:2019/oprA1:2019
ISO 23208:2017/DAM 1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 23208:2019/oprA1:2019
ISO 23208:2017/DAM 1:201
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.