SIST EN IEC 60335-2-103:2023/A2:2023
(Amendment)Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2015/A2:2019)
Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2015/A2:2019)
This European Standard deals with the safety of electric drives for horizontally and vertically moving gates, doors, garage doors and windows for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. It also covers the hazards associated with the movement of the driven part.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-103: Besondere Anforderungen für Antriebe für Tore, Türen und Fenster (IEC 60335-2-103:2015/A2:2019)
Appareils électrodomestiques et analogues - sécurité - Partie 2-103: Exigences particulières pour les motorisations de portails, portes et fenêtres (IEC 60335-2-103:2015/A2:2019)
Gospodinjski in podobni električni aparati - Varnost - 2-103. del: Posebne zahteve za pogonske sklope vrat in oken (IEC 60335-2-103:2015/A2:2019) - Dopolnilo A2
General Information
Relations
Overview
EN IEC 60335-2-103:2023/A2:2023 (CENELEC) is an amendment to IEC 60335-2-103 addressing the safety of electric drives for gates, doors, garage doors and windows used in household and similar applications. The standard applies to drives with rated voltages up to 250 V for single‑phase units and 480 V for other drives, and specifically covers hazards associated with the movement of the driven part. This document (A2) updates definitions, marking/instruction requirements, heating and abnormal‑operation tests, and several annexes for entrapment protection and impact‑force limits.
Key Topics and Requirements
- Scope and ratings: Covers horizontally and vertically moving driven parts for household and similar use; voltage limits clearly defined (≤250 V single‑phase, ≤480 V others).
- New definitions: Adds terms such as main closing edge and opposing closing edge to clarify entrapment and impact‑force testing.
- Marking and instructions:
- Drives supplied without driven parts must be marked with rated load (N or Nm) and operating‑time/cycle ratings.
- Instructions must warn against child access, manual‑release risks, biased‑off switches, and maintenance/inspection needs.
- Manufacturer identity and model can be provided via visible labels (e.g., matrix barcode) after installation.
- Heating and duty cycles:
- Distinguishes continuous vs non‑continuous operation.
- Specifies test cycles for gate, garage door and window drives (e.g., household gates/garage doors tested for three cycles or the rated operating time, whichever is longer).
- Drives rated in cycles per hour are tested at +20% of rated cycles with declared rest periods.
- Abnormal operation and safety behavior:
- If a drive can operate under simulated faults, it must either continue to meet requirements or stop after one cycle with the driven part in a safe position or switch to biased‑off mode.
- Supply connection and Class III rules:
- Clarifies temperature rise exemptions and pull‑force testing thresholds for Class III appliances.
- Annexes:
- DD: tests for horizontally/vertically moving doors and gates (including obstacle specification).
- GG: entrapment protection for revolving doors.
- HH: permissible dynamic forces for pedestrian doors.
- JJ: low‑energy movement requirements.
Applications and Users
Who uses this standard:
- Manufacturers of gate drives, garage door motors, window actuators and door operators for residential/commercial buildings
- Test laboratories and conformity assessment bodies performing safety and type testing
- Installers, specifiers, and building safety engineers requiring compliance guidance
- Regulatory and certification bodies applying CENELEC/IEC requirements in Europe
Practical uses:
- Designing safe door/gate drives that meet entrapment, impact‑force and thermal limits
- Preparing technical documentation, markings and user instructions
- Establishing test programs for type approval and CE marking
Related Standards
- Base publication: EN IEC 60335-2-103:2023 (Particular requirements); this document is Amendment A2 and is read alongside A1 and A11 as referenced in the amendment.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2023
Gospodinjski in podobni električni aparati - Varnost - 2-103. del: Posebne zahteve
za pogonske sklope vrat in oken (IEC 60335-2-103:2015/A2:2019) - Dopolnilo A2
Household and similar electrical appliances - Safety - Part 2-103: Particular requirements
for drives for gates, doors and windows (IEC 60335-2-103:2015/A2:2019)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-103:
Besondere Anforderungen für Antriebe für Tore, Türen und Fenster (IEC 60335-2-
103:2015/A2:2019)
Appareils électrodomestiques et analogues - sécurité - Partie 2-103: Exigences
particulières pour les motorisations de portails, portes et fenêtres (IEC 60335-2-
103:2015/A2:2019)
Ta slovenski standard je istoveten z: EN IEC 60335-2-103:2023/A2:2023
ICS:
13.120 Varnost na domu Domestic safety
29.120.01 Električna dodatna oprema Electrical accessories in
na splošno general
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60335-2-103:2023/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 13.120; 91.060.50
English Version
Household and similar electrical appliances - Safety - Part 2-103:
Particular requirements for drives for gates, doors and windows
(IEC 60335-2-103:2015/A2:2019)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-103: Exigences particulières pour les motorisations ähnliche Zwecke - Teil 2-103: Besondere Anforderungen für
de portails, portes et fenêtres Antriebe für Tore, Türen und Fenster
(IEC 60335-2-103:2015/A2:2019) (IEC 60335-2-103:2015/A2:2019)
This amendment A2 modifies the European Standard EN IEC 60335-2-103:2023; it was approved by CENELEC on 2022-09-05. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-103:2023/A2:2023 E
European foreword
This document (EN IEC 60335-2-103:2023/A2:2023) consists of the text of IEC 60335-2-103:2015/A2:2019
prepared by IEC/TC 61 “Safety of household and similar electrical appliances”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-11-12
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2026-05-12
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-103:2023, EN IEC 60335-2-103:2023/A1:2023 and
EN IEC 60335-2-103:2023/A11:2023.
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-103:2015/A2:2019 was approved by CENELEC as a
European Standard without any modification.
IEC 60335-2-103 ®
Edition 3.0 2019-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Household and similar electrical appliances – Safety –
Part 2-103: Particular requirements for drives for gates, doors and windows
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-103: Exigences particulières pour les motorisations de portails, portes
et fenêtres
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 91.060.50 ISBN 978-2-8322-7627-3
–2 – IEC 60335-2-103:2015/AMD2:2019
© IEC 2019
FOREWORD
This amendment has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61/5927/FDIS 61/5943/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to th
...
Frequently Asked Questions
SIST EN IEC 60335-2-103:2023/A2:2023 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2015/A2:2019)". This standard covers: This European Standard deals with the safety of electric drives for horizontally and vertically moving gates, doors, garage doors and windows for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. It also covers the hazards associated with the movement of the driven part.
This European Standard deals with the safety of electric drives for horizontally and vertically moving gates, doors, garage doors and windows for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. It also covers the hazards associated with the movement of the driven part.
SIST EN IEC 60335-2-103:2023/A2:2023 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 29.120.01 - Electrical accessories in general; 91.060.50 - Doors and windows. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 60335-2-103:2023/A2:2023 has the following relationships with other standards: It is inter standard links to SIST EN IEC 60335-2-103:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 60335-2-103:2023/A2:2023 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN IEC 60335-2-103:2023/A2:2023 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...