SIST EN 2714-007:2006
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard
This standard specifies the characteristics of UV laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 260 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 007: Geschirmt (Umseilung) und ummantelt, UV Laser bedruckbar - Produktnorm
Diese Norm legt die Eigenschaften von UV-Laser-bedruckbaren, ein- und mehradrigen geschirmten (Um¬seilung) und ummantelten elektrischen Leitungen zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen 55 °C und 260 °C fest.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung oder Tintenstrahlbedruckung zu kenn¬zeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen.
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 007 : Blindés (guipés) et gainés, marquables au laser UV - Norme de produit
Aeronavtika – Eno- ali večžilni električni kabli za splošno uporabo – Delovne temperature med –55 °C in 260 °C – 007. del: Oklopljeni (spirala) in oplaščeni, z možnostjo UV-laserskega tiskanja – Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 30-Jun-2006
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jul-2006
- Due Date
- 01-Jul-2006
- Completion Date
- 01-Jul-2006
Overview
SIST EN 2714-007:2006 is a European standard developed by CEN that defines the product requirements for aerospace electrical cables. Specifically, it covers single and multicore screened (spiral) and jacketed electrical cables designed for the rigorous environment of aircraft on-board electrical systems. These cables are engineered to reliably operate in extreme temperature conditions ranging from -55 °C up to 260 °C. A key feature of these cables is their UV laser printability, which facilitates durable and precise cable identification and traceability in aerospace applications. The standard also permits additional marking methods such as hot stamp printing and ink jet printing, ensuring compliance with EN 3838 for user-applied markings.
Key Topics
- Cable Construction and Materials:
- Single to 4-core cables, twisted as per EN 2235, with no filler cores permitted.
- Nickel-plated copper stranded spiral screen for electromagnetic interference protection, adhering to EN 2083 conductor standards.
- Outer jacket composed of polyimide coated by fluorocarbon layers, with a polytetrafluoroethylene (PTFE) protective layer, designed for durability and chemical resistance.
- Operating Temperature Range:
- Cables are suitable for a broad thermal range (-55 °C to 260 °C), ensuring stable performance in harsh aerospace environments.
- Marking and Identification:
- UV laser printability enables high-precision and lasting marking on cable jackets.
- Supports hot stamp and ink jet printing, with all markings aligned to EN 3838 standards for consistent identification in aircraft systems.
- Performance and Testing Requirements:
- Compliance with multiple test methods including mechanical, electrical, thermal aging, fire resistance, and chemical resistance per EN 3475-100 and EN 2235.
- Specific tests cover ohmic resistance, insulation resistance, voltage proof, bending, cold performance, flammability (extinguishing time ≤ 3 seconds), thermal endurance (40,000 hours at 260 °C), and abrasion resistance.
- Quality Assurance:
- Production and product quality conform to aerospace quality management qualifications per EN 9133, ensuring reliability and consistency for aerospace-grade cables.
Applications
This standard applies to aerospace electrical cables primarily used for:
- On-board Aircraft Electrical Systems
- Power and signal transmission within commercial and military aircraft electrical networks.
- General Purpose Wiring in Aerospace Environments
- Cabling where high resistance to temperature extremes, mechanical wear, and electromagnetic interference is essential.
- Systems Requiring Durable Markings
- Applications needing traceable and permanent marking solutions for safety, maintenance, and regulatory compliance.
By adhering to EN 2714-007, aerospace manufacturers and suppliers can ensure electrical cables meet stringent industry requirements for safety, reliability, and performance under extreme conditions.
Related Standards
- EN 2083 – Copper or copper alloy conductors for aerospace electrical cables.
- EN 2235 – Technical specification for single and multicore screened and jacketed aerospace cables.
- EN 2267-003 – Ink jet printable aerospace cables for temperatures between -55 °C and 260 °C.
- EN 2714-002 – General requirements for screened and jacketed aerospace electrical cables.
- EN 3475-100 – Test methods for aerospace electrical cables.
- EN 3838 – Requirements for user-applied markings on aircraft electrical cables.
- EN 9133 – Quality management systems qualification procedure for aerospace standard parts.
Keywords: aerospace electrical cables, screened spiral cables, UV laser printable cables, aircraft wiring, high-temperature cables, multimode aerospace cables, cable marking standards, EN 2714-007, aerospace cable standards, cable temperature range -55°C to 260°C.
Frequently Asked Questions
SIST EN 2714-007:2006 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard". This standard covers: This standard specifies the characteristics of UV laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 260 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
This standard specifies the characteristics of UV laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 260 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
SIST EN 2714-007:2006 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2714-007:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2006
$HURQDYWLND±(QRDOLYHþåLOQLHOHNWULþQLNDEOL]DVSORãQRXSRUDER±'HORYQH
WHPSHUDWXUHPHG±ƒ&LQƒ&±GHO 2NORSOMHQL VSLUDOD LQRSODãþHQL]
PRåQRVWMR89ODVHUVNHJDWLVNDQMD±6WDQGDUG]DSURL]YRG
Aerospace series - Cables, electrical, single and multicore for general purpose -
Operating temperatures between - 55 °C and 260 °C - Part 007: Screened (spiral) and
jacketed, UV laser printable - Product standard
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine
Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 007: Geschirmt
(Umseilung) und ummantelt, UV Laser bedruckbar - Produktnorm
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général -
Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 007 :
Blindés (guipés) et gainés, marquables au laser UV - Norme de produit
Ta slovenski standard je istoveten z: EN 2714-007:2005
ICS:
49.060
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 2714-007
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 49.060
English Version
Aerospace series - Cables, electrical, single and multicore for
general purpose - Operating temperatures between - 55 °C and
260 °C - Part 007: Screened (spiral) and jacketed, UV laser
printable - Product standard
Série aérospatiale - Câbles, électriques, mono et Luft- und Raumfahrt - Leitungen, elektrisch, ein- und
multiconducteurs d'usage général - Températures de mehradrig, für allgemeine Verwendung -
fonctionnement comprises entre - 55 °C et 260 °C - Partie Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil
007 : Blindés (guipés) et gainés, marquables au laser UV - 007: Geschirmt (Umseilung) und ummantelt, UV Laser
Norme de produit bedruckbar - Produktnorm
This European Standard was approved by CEN on 12 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2714-007:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms, definitions and symbols .4
4 Materials and construction.5
5 Required characteristics.7
6 Quality assurance.8
7 Designation.9
8 Identification and marking.9
9 Packaging, labelling and delivery lengths .9
10 Technical specification.9
Foreword
This European Standard (EN 2714-007:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the
latest by April 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
1 Scope
This standard specifies the characteristics of UV laser printable, single and multicore screened (spiral) and
jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures
between − 55 °C and 260 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.
2 Normative references
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...