iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50102:2001/A1:2001

(Amendment)

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

D99/171: BTTF 68-3 disbanded * Identical with EN 62262:2002 (boomerang)

Schutzarten durch Gehäuse für elektrische Betriebsmittel (Ausrüstung) gegen äußere mechanische Beanspruchungen (IK-Code)

Degrés de protection procurés par les enveloppes de matériels électriques contre les impacts mécaniques externes (code IK)

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

General Information

Status
Withdrawn
Publication Date
31-Aug-2001
Withdrawal Date
21-May-2024
ICS
29.020 - Electrical engineering in general
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-May-2024
Due Date
13-Jun-2024
Completion Date
22-May-2024
Ref Project
EN 50102:1995/A1:1998 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

Relations

Amends
SIST EN 50102:2001 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
Effective Date
28-Jan-2023
Amends
SIST EN 50102:2001 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
Effective Date
21-Sep-2010

Buy Standard

EN 50102:2001/A1:2001EN 50102:2001/A1:2001
PreviousNext
Amendment
EN 50102:2001/A1:2001
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50102:2001/A1:2001
01-september-2001
Degrees of protection provided by enclosures for electrical equipment against
external mechanical impacts (IK code)
Degrees of protection provided by enclosures for electrical equipment against external
mechanical impacts (IK code)
Schutzarten durch Gehäuse für elektrische Betriebsmittel (Ausrüstung) gegen äußere
mechanische Beanspruchungen (IK-Code)
Degrés de protection procurés par les enveloppes de matériels électriques contre les
impacts mécaniques externes (code IK)
Ta slovenski standard je istoveten z: EN 50102:1995/A1:1998
ICS:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62561-7:2024(Main)
Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds (IEC 62561-7:2024)
EN IEC 62561-7:2024

This part of IEC 62561 specifies the requirements and tests for earthing enhancing compounds
producing low resistance of an earth termination system.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-716:2024(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations - ELV DC power distribution over information and communications technology (ICT) cable infrastructure (IEC 60364-7-716:2023)
HD 60364-7-716:2023

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-3-4:2024(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests (IEC 60068-3-4:2023)
EN IEC 60068-3-4:2023

This part of IEC 60068 provides the necessary information and the basic principles of the effect
of humidity in the context of environmental testing to assist in preparing relevant specifications,
such as standards for components or equipment. Furthermore, information is provided on
operating climatic test chambers.
The object of this document is to present supporting documentation and guidance for a range
of damp heat tests which, when specified by the relevant specification, can be applied to
demonstrate the performance of equipment for which damp heat testing is required with the
main aim of achieving qualification. This information and basic principles are intended to help
selecting appropriate tests and test severities for specific products and, in some cases, specific
types of application.
The object of damp heat tests is to determine the ability of products to withstand the stresses
occurring in a high relative humidity environment, with or without condensation, and with special
regard to variations of electrical and mechanical characteristics. Damp heat tests can also be
utilized to check the resistance of a specimen to some forms of corrosion attack.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60068-3-1:2024(Main)
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests (IEC 60068-3-1:2023)
EN IEC 60068-3-1:2023

This part of IEC 60068 provides guidance regarding the performance of cold and dry heat tests.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62321-11:2024(Main)
Determination of certain substances in electrotechnical products - Part 11: Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)
EN IEC 62321-11:2024

This part of IEC 62321 specifies two different techniques for the determination of
tris(2-chloroethyl) phosphate (TCEP) in plastics, the GC-MS or LC-MS method, both of which
are applicable to quantitative analysis.
These two techniques are applicable to use with polyurethane, polyvinylchloride, and
polyethylene materials containing TCEP between 200 mg/kg to 2 000 mg/kg.
These test methods do not apply to plastic materials having a processing temperature higher
than 230 °C.
GC-MS using a pyrolyser/thermal desorption accessory (Py/TD-GC-MS) technique is described
in Annex A and can be used for the screening of TCEP in plastics.
NOTE TCEP starts thermal decomposition at approximately 230 °C. Polymer types that have a processing
temperature into shapes of plastics (e.g. pellets, moulded parts or sheets) not exceeding the decomposition
temperature can contain TCEP.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62561-5:2024(Main)
Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals (IEC 62561-5:2023)
EN IEC 62561-5:2024

This part of IEC 62561 specifies the requirements and tests for earth electrode inspection
housings (earth housings) installed in the earth and for earth electrode seals.
Lightning protection system components (LPSC) can also be suitable for use in hazardous
atmospheres. For this reason, there are additional requirements when installing the components
under such conditions.
NOTE Different requirements and test procedures are given in the EN 124 series [2] and the EN 1253 series [3].

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60695-2-10:2022/AC:2024(Corrigendum)
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure (IEC 60695-2-10:2021/COR1:2024)
EN IEC 60695-2-10:2021/AC:2024-01
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62321-3-4:2024(Main)
Determination of certain substances in electrotechnical products - Part 3-4: Screening of Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS)
EN IEC 62321-3-4:2023

IEC 62321-3-4:2023 specifies procedures for the screening of di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products by using high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS).
High performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) techniques are described in the normative part of this document. Fourier transform infrared spectroscopy (FT-IR) is described in the informative annexes of this document.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62561-4:2024(Main)
Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners (IEC 62561-4:2023)
EN IEC 62561-4:2023

IEC 62561-4:2023 is available as  which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62561-4:2023 deals with the requirements and tests for metallic and non-metallic conductor fasteners that are used to retain and support the air-termination, down-conductor and earth-termination systems. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with the latest edition of ISO IEC 60068-2-52:2017 relating to salt mist atmosphere treatment;
b) alignment with the new edition of ISO 22479:2019 relating to humid sulphurous atmosphere treatment;
c) new normative annex for the applicability of previous tests.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61936-2:2023(Main)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
EN IEC 61936-2:2023

This part of IEC 61936 provides, in a convenient form, requirements for the design and the
erection of DC installations in systems with nominal voltages above 1,5 kV DC, so as to provide
safety and proper functioning for the use intended.
For the purpose of interpreting this document, a DC installation is considered to be one of the
following:
a) A converter station or DC switching station;
b) one (or more) DC generating or storage unit(s), such as solar farms or battery storage units,
located on a single site, the DC installation includes DC equipment and cables with all
associated power electronics, controlgear, switchgear and all electrical auxiliary systems.
Connections between DC generating or storage units located on different sites are excluded;
c) DC installation erected on offshore facilities for the purpose of generation, transmission,
distribution and/or storage of electricity; or
d) DC transition station (between overhead lines and underground cable or between different
sections of underground cables).
This International Standard does not apply to the design and erection of any of the following:
– overhead and underground lines between separate installations;
– electric railways;
– mining equipment and installations;
– installations on ships according to IEC 60092 series and offshore units according to
IEC 61892 series, which are used in the offshore petroleum industry for drilling, processing
and storage purposes;
– electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
– test sites;
– medical equipment, e.g. medical X-ray equipment;
– valve hall or converter hall.
This document does not apply to the requirements for carrying out live working on electrical
installations.
This document does not apply to the design of factory-built, type-tested thyristor valves, VSC
valves and switchgear for which separate IEC standards exist.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day