SIST EN IEC 63044-5-1:2019/A1:2025

SLOVENSKI STANDARD
01-januar-2025
Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in
sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 5-1. del: Zahteve, pogoji in
priprava preskusov EMC - Dopolnilo A1 (IEC 63044-5-1:2017/AMD1:2022)
Home and Building Electronic Systems (HBES) and Building Automation and Control
Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up (IEC 63044-5-
1:2017/AMD1:2022)
Allgemeine Anforderungen an die Elektrische Systemtechnik für Heim und Gebäude
(ESHG) und an Systeme der Gebäudeautomation (GA) - Teil 5-1: EMV-Anforderungen,
Bedingungen und Prüfungen (IEC 63044-5-1:2017/AMD1:2022)
Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et
systèmes de gestion technique du bâtiment (SGTB) - Partie 5-1: CEM Exigences
générales, condition et montage d’essais (IEC 63044-5-1:2017/AMD1:2022)
Ta slovenski standard je istoveten z: EN IEC 63044-5-1:2019/A1:2024
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63044-5-1:2019/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2024
ICS 29.120.01; 29.120.99
English Version
Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part 5-1: EMC
requirements, conditions and test set-up
(IEC 63044-5-1:2017/AMD1:2022)
Systèmes électroniques pour les foyers domestiques et les Allgemeine Anforderungen an die Elektrische
bâtiments (HBES) et systèmes de gestion technique du Systemtechnik für Heim und Gebäude (ESHG) und an
bâtiment (SGTB) - Partie 5-1: CEM Exigences générales, Systeme der Gebäudeautomation (GA) - Teil 5-1: EMV-
condition et montage d'essais Anforderungen, Bedingungen und Prüfungen
(IEC 63044-5-1:2017/AMD1:2022) (IEC 63044-5-1:2017/AMD1:2022)
This amendment A1 modifies the European Standard EN IEC 63044-5-1:2019; it was approved by CENELEC on 2024-09-25. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63044-5-1:2019/A1:2024 E

European foreword
The text of document 23/1001/FDIS, future edition 1 of IEC 63044-5-1/AMD1, prepared by TC 23
"Electrical accessories" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 63044-5-1:2019/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-11-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63044-5-1:2017/AMD1:2022 was approved by CENELEC
as a European Standard without any modification.

IEC 63044-5-1 ®
Edition 1.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Home and building electronic systems (HBES) and building automation and

control systems (BACS) –
Part 5-1: EMC requirements, conditions and test set-up

Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et

systèmes de gestion technique du bâtiment (SGTB) –

Partie 5-1: CEM Exigences générales, condition et montage d’essais

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.01; 29.120.99 ISBN 978-2-8322-3809-7

– 2 – IEC 63044-5-1:2017/AMD1:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND
BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) –

Part 5-1: EMC requirements, conditions and test set-up

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly
...