SIST EN 62087-2:2018

SLOVENSKI STANDARD
SIST EN 62087-2:2018
01-januar-2018
1DGRPHãþD
SIST EN 62087:2012
$YGLRYLGHRLQSULSDGDMRþDRSUHPD8JRWDYOMDQMHSRUDEHHQHUJLMHGHO6LJQDOL
LQPHGLML,(&
Audio, video, and related equipment - Determination of power consumption -- Part 2:
Signals and media (IEC 62087-2:2015)
Messverfahren für die Leistungsaufnahme von Audio-, Video- und verwandten Geräten -
Teil 2: Signale und Medien (IEC 62087-2:2015)
Appareils audio, vidéo et matériel connexe - Détermination de la consommation de
puissance - Partie 2 : Signaux et supports (IEC 62087-2:2015)
Ta slovenski standard je istoveten z: EN 62087-2:2016
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
SIST EN 62087-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62087-2:2018

---------------------- Page: 2 ----------------------

SIST EN 62087-2:2018


EUROPEAN STANDARD EN 62087-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2016
ICS 33.160.10 Supersedes EN 62087:2012 (partially)
English Version
Audio, video, and related equipment -
Determination of power consumption -
Part 2: Signals and media
(IEC 62087-2:2015)
Appareils audio, vidéo et matériel connexe - Détermination Messverfahren für die Leistungsaufnahme von Audio-,
de la consommation de puissance - Video- und verwandten Geräten -
Partie 2 : Signaux et supports Teil 2: Signale und Medien
(IEC 62087-2:2015) (IEC 62087-2:2015)
This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62087-2:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62087-2:2018
EN 62087-2:2016
European foreword
The text of document 100/2467/FDIS, future edition 1 of IEC 62087-2, prepared by Technical Area 12
"AV energy efficiency and smart grid applications" of IEC/TC 100 "Audio, video and multimedia
systems and equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62087-2:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-07-08
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-01-08
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62087:2012 (partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62087-2:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60933-5 NOTE Harmonized as EN 60933-5.
1)
IEC 62087:2008 NOTE Harmonized as EN 62087:2009 (not modified).
IEC 62087:2011 NOTE Harmonized as EN 62087:2012 (not modified).
IEC 62087 Series NOTE Harmonized as EN 62087 Series.
IEC 62087-3 NOTE Harmonized as EN 62087-3.
IEC 62087-4 NOTE Harmonized as EN 62087-4.
IEC 62087-5 NOTE Harmonized as EN 62087-5.
IEC 62087-6 NOTE Harmonized as EN 62087-6.
2)
IEC 62104:2015 NOTE Harmonized as EN 62104 (not modified).

1)
Superseded by EN 62087:2012 (IEC 62087:2011).
2)
To be published.
2

---------------------- Page: 4 ----------------------

SIST EN 62087-2:2018
EN 62087-2:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 60107-1 1997 Methods of measurement on receivers for EN 60107-1 1997
television broadcast transmissions -
Part 1: General considerations -
Measurements at radio and video
frequencies
IEC 60268-1 1985 Sound system equipment - HD 483.1 S2 1989
+A1 1988 Part 1: General
+A2 1988
IEC 60958-1 2008 Digital audio interface - EN 60958-1 2008
+A1 2014 Part 1: General +A1 2014
IEC 60958-3 2006 Digital audio interface - EN 60958-3 2006
+A1 2009 Part 3: Consumer applications +A1 2010
IEC 61938 2013 Multimedia systems - Guide to the EN 61938 2013
recommended characteristics of analogue
interfaces to achieve interoperability
3)
IEC 62087-1 2015 Audio, video, and related equipment - EN 62087-1 -
Determination of power consumption -
Part 1: General
IEC 62087 2015 Video_content_DVD_50, Video content for - -
the IEC 62087:2015 series on DVD, 50 Hz
vertical scan frequency
IEC 62087 2015 Video_content_DVD_60, Video content for - -
the IEC 62087:2015 series on DVD, 60 Hz
vertical scan frequency
IEC 62087 2015 Video_content_BD_50, Video content for - -
TM
the IEC 62087:2015 series on Blu-ray
Disc, 50 Hz vertical scan frequency
IEC 62087 2015 Video_content_BD_60, Video content for - -
TM
the IEC 62087:2015 series on Blu-ray
Disc, 60 Hz vertical scan frequency
IEC 62216 2009 Digital terrestrial television receivers EN 62216 2011
for the DVB-T system


3)
To be published.
3

---------------------- Page: 5 ----------------------

SIST EN 62087-2:2018

---------------------- Page: 6 ----------------------

SIST EN 62087-2:2018




IEC 62087-2

®


Edition 1.0 2015-06




INTERNATIONAL



STANDARD









colour

inside










Audio, video, and related equipment – Determination of power consumption –

Part 2: Signals and media



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.160.10 ISBN 978-2-8322-2682-7



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62087-2:2018
– 2 – IEC 62087-2:2015 © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 9
4 Signals . 10
4.1 Audio-visual signals used for the determination of power consumption . 10
4.1.1 Overview . 10
4.1.2 Static video signals . 10
4.1.3 Dynamic broadcast-content video signal . 11
4.1.4 Internet-content video signal . 11
4.1.5 Audio signal associated with video signals . 11
4.2 Video signals used for the determination of the peak luminance ratio . 11
4.2.1 General . 11
4.2.2 Video signals . 11
4.3 Audio signals used for determination of audio power consumption . 13
4.3.1 Audio signals . 13
4.3.2 Signal levels . 13
5 Media . 14
5.1 Packaged media . 14
5.2 Blu-ray Disc™ . 14
5.3 DVD . 14
6 Signal generation . 14
6.1 Audio-visual signal generating equipment . 14
6.2 Interfaces . 15
6.2.1 HDMI® . 15
6.2.2 DisplayPort . 15
6.2.3 Component analogue video . 15
6.2.4 S-Video . 15
6.2.5 Composite analogue video . 15
6.2.6 Analogue terrestrial interface . 15
6.2.7 Cable television interface . 16
6.2.8 Digital terrestrial interface . 16
6.2.9 Satellite interface . 16
6.3 Accuracy of video signal levels . 16
Annex A (informative) Description of video signals used for the determination of
power consumption . 17
A.1 General . 17
A.2 Static video signals . 17
A.3 Dynamic broadcast-content video signals . 17
A.4 Internet-content video signals . 18
A.5 Dynamic broadcast-content data . 19
A.6 Internet-content data . 22

---------------------- Page: 8 ----------------------

SIST EN 62087-2:2018
IEC 62087-2:2015 © IEC 2015 – 3 –
Annex B (informative) Description of video signals used for the determination of the
peak luminance ratio . 23
B.1 General . 23
B.2 Three bar video signal . 23
B.3 Box and outline video signal . 23
Bibliography . 24

Figure 1 – Gamma-corrected average picture level (APL′) . 9
Figure 2 – Box and outline video signal, including signal drive values . 12
Figure 3 – Box and outline video signal, outline dimensions . 12
Figure 4 –Box and outline video signal, box size . 12
Figure A.1 – Dynamic broadcast-content video signal APL′ . 18
Figure A.2 – Internet-content video signal APL′ . 19

Table 1 – Signal numbering . 14
Table A.1 – Dynamic broadcast-content data . 19
Table A.2 – Internet-content data . 22

---------------------- Page: 9 ----------------------

SIST EN 62087-2:2018
– 4 – IEC 62087-2:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

AUDIO, VIDEO, AND RELATED EQUIPMENT –
DETERMINATION OF POWER CONSUMPTION –

Part 2: Signals and media

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62087-2 has been prepared by technical area 12: AV energy
efficiency and smart grid applications, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
This first edition of IEC 62087-2 together with IEC 62087-1 and IEC 62087-3 to IEC 62087-6
cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a technical
revision.
This edition includes the following significant technical changes with respect to Clause 11 of
IEC 62087:2011.
– The signals included on the discs are now numbered generically, rather than being based
on the subclause numbers within the text of the television test method.
– Video test patterns used to determine the peak luminance ratio are now included on the
discs.
– Audio test signals are specified.

---------------------- Page: 10 ----------------------

SIST EN 62087-2:2018
IEC 62087-2:2015 © IEC 2015 – 5 –
– The box and outline video signal has been added.
The text of this standard is based on the following documents:
FDIS Report on voting
100/2467/FDIS 100/2497/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all parts in the IEC 62087 series, published under the general title Audio, video, and
related equipment – Determination of power consumption, can be found on the IEC website.
This publication contains attached files in the form of DVDs and Blu-ray discs, as indicated in
the list of normative references. These files form an integral part of this standard.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 11 ----------------------

SIST EN 62087-2:2018
– 6 – IEC 62087-2:2015 © IEC 2015
INTRODUCTION
This standard identifies signals and media to be used to determine power consumption and
related characteristics specified in some other parts of IEC 62087:2015. The media include
Blu-ray Discs™ and DVDs.
1
IEC 62087:2008 (second edition) added methods for measuring On (average) mode power
consumption of televisions, based on three video signal sets. These include static, dynamic
broadcast-content, and Internet-content signals.
2
IEC 62087:2011 (third edition) revised methods for measuring power consumption of set top
boxes. The signals and media were not changed in this third edition.
This edition of IEC 62087 separates the standard into parts, including this signals and media
part which specifies signals that are to be used for determining power consumption and
related characteristics. The three original video signal sets (static, dynamic broadcast-
content, and Internet-content) are not changed. This edition adds signals for the purpose of
determining the peak luminance ratio that is sometimes associated with television power
consumption measurement programs.
IEC 62087 has been subdivided and currently consists of the following planned or published
parts:
– Part 1: General
– Part 2: Signals and media
– Part 3: Television sets
– Part 4: Video recording equipment
– Part 5: Set top boxes
– Part 6: Audio equipment


___________
1
 IEC 62087:2008, Methods of measurement for the power consumption of audio, video and related equipment
2
 IEC 62087:2011, Methods of measurement for the power consumption of audio, video and related equipment

---------------------- Page: 12 ----------------------

SIST EN 62087-2:2018
IEC 62087-2:2015 © IEC 2015 – 7 –
AUDIO, VIDEO, AND RELATED EQUIPMENT –
DETERMINATION OF POWER CONSUMPTION –

Part 2: Signals and media



1 Scope
This part of IEC 62087 specifies signals and media used in determination of the power
consumption of audio, video, and related equipment, such as television sets and computer
monitors. It also specifies signals for determining the peak luminance ratio that is sometimes
associated with television power consumption measurement programs. In addition, this part
specifies equipment, interfaces, and accuracy related to signal generation.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60107-1:1997, Methods of measurement on receivers for television broadcast trans-
missions – Part 1: General conditions – Measurements at radio and video frequencies
IEC 60268-1:1985, Sound system equipment – Part 1: General
IEC 60268-1:1985/AMD1:1988-01
IEC 60268-1:1985/AMD2:1988-06
IEC 60958-1:2008, Digital audio interface – Part 1: General
IEC 60958-1:2008/AMD1:2014
IEC 60958-3:2006, Digital audio interface – Part 3: Consumer applications
IEC 60958-3:2006/AMD1:2009
IEC 61938:2013, Multimedia systems – Guide to the recommended characteristics of
analogue interfaces to achieve interoperability
IEC 62087-1:2015, Audio, video, and related equipment – Determination of power
consumption – Part 1: General
IEC 62087:2015, video_content_DVD_50, Video content for the IEC 62087:2015 series on
DVD, 50 Hz vertical scan frequency
IEC 62087:2015, video_content_DVD_60, Video content for the IEC 62087:2015 series on
DVD, 60 Hz vertical scan frequency
IEC 62087:2015, video_content_BD_50, Video content for the IEC 62087:2015 series on
Blu-ray™ Disc, 50 Hz vertical scan frequency
IEC 62087:2015, video_content_BD_60, Video content for the IEC 62087:2015 series on
Blu-ray™ Disc, 60 Hz vertical scan frequency
IEC 62216:2009, Digital terrestrial television receivers for the DVB-T system

---------------------- Page: 13 ----------------------

SIST EN 62087-2:2018
– 8 – IEC 62087-2:2015 © IEC 2015
3 Terms, definitions, and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms, abbreviations, and definitions in
IEC 62087-1:2015, as well as the following apply.
3.1.1
average picture level
APL
average luminance level of an internal video signal after the inverse gamma correction within
display equipment, such as a television set or computer monitor
3.1.2
backlit display
display that generates light from a source behind the display panel, for instance a liquid-
crystal display (LCD)
3.1.3
component analogue video
baseband analogue video interface that carries a standard or high definition colour video
signal over three signal lines
Note 1 to entry: See CEA-770.3-E.
3.1.4
composite analogue video
baseband analogue video interface that carries a standard definition colour video signal over
a single signal line
Note 1 to entry: See SMPTE ST 170M:2004 for the 59,94 Hz version and ITU-R BT.470-5 for the 50 Hz version.
3.1.5
digital visual interface
DVI
video interface that is capable of carrying analogue or digital uncompressed video
3.1.6
DisplayPort
digital display interface developed by the Video Electronics Standards Association
3.1.7
emissive display
display that generates light directly from each sub-pixel, for instance a PDP or OLED display
3.1.8
gamma-corrected average picture level
APL′
average luma (Y′) level of an external video input signal that may be applied to display
equipment, such as a television set or computer monitor
Note 1 to entry: APL′ is determined during the active scanning time integrated over a frame period, defined as a
percentage of the range between reference black and reference white level.
Note 2 to entry: This is not a measure of the inverse gamma-corrected signal that might be available inside of
some display equipment and delivered to the display device. The external and internal video signals are shown in
Figure 1.

---------------------- Page: 14 ----------------------

SIST EN 62087-2:2018
IEC 62087-2:2015 © IEC 2015 – 9 –
Display equipment
Internal
External
Inverse video
Display
video
gamma
device
signal Y′
circuit

Used to measure
Not used for
gamma-corrected
measuring APL′
average picture

level (APL′)

IEC

Figure 1 – Gamma-corrected average picture level (APL′)
3.1.9
high definition multimedia interface
3
HDMI®
audio-visual interface that is capable of carrying uncompressed video data, compressed or
uncompressed digital audio data, and other information
Note 1 to entry: See HDMI specification.
3.1.10
luma
Y′
gamma-corrected video signal that represents brightness
3.1.11
S-video
baseband analogue video interface that carries a standard definition colour video signal using
two signal lines
Note 1 to entry: See IEC 60933-5.
3.2 Abbreviations
′ Prime
AM Amplitude Modulation
APL Average Picture Level
APL′ Gamma-Corrected Average Picture Level
AV Audio-visual
4
BD Blu-ray Disc™
BER Bit Error Ratio
DAB Digital Audio Broadcast
dB decibel
DVD Digital Versatile Disc
EPA Environmental Protection Agency
FM Frequency Modulation
Hz Hertz
___________
3
 HDMI® is a registered trade mark of HDMI Licensing, LLC. This information is given for the convenience of
users of this document and does not constitute an endorsement by IEC of the product named.
4
 Blu-ray Disc™ is a trade mark of the Blu-ray Disc Association. This information is given for the convenience of
users of this document and does not constitute an endorsement by IEC of the product named.

---------------------- Page: 15 ----------------------

SIST EN 62087-2:2018
– 10 – IEC 62087-2:2015 © IEC 2015
HDMI® High Definition Multimedia Interface
JEITA Japan Electronics and Information Technology industries Association
LCD Liquid Crystal Display
NTSC National Television Standards Committee
OLED Organic Light-Emitting Diode
OOI Acoustic Onset Of Impairment
PAL Phase Alternating Line
PDP Plasma Display Panel
RF Radio Frequency
rms root mean square
SECAM Séquentiel Couleur à Mémoire
SMPTE Society of Motion Picture and Television Engineers
US United States of America
4 Signals
4.1 Audio-visual signals used for the determination of power consumption
4.1.1 Overview
A general description of the video signals i
...