SIST EN IEC 60309-5:2020

SLOVENSKI STANDARD
SIST EN IEC 60309-5:2020
01-april-2020
Vtiči, vtičnice in spojni elementi za industrijsko rabo - 5. del: Zahteve za
dimenzijsko skladnost in zamenljivost za vtiče, vtičnice, ladijske konektorje in
ladijske dovode za obalne povezovalne nizkonapetostne sisteme (LVSC) (IEC
60309-5:2017)
Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional
compatibility and interchangeability requirements for plugs, socket-outlets, ship
connectors and ship inlets for low-voltage shore connection systems (LVSC) (IEC 60309
-5:2017)
Stecker, Steckdosen und Kupplungen für industrielle Anwendungen - Teil 5:
Anforderungen und Hauptmaße für die Austauschbarkeit von Steckern, Steckdosen,
Schiffskupplungen und Schiffssteckern für Niederspannungs-Landanschlusssysteme
(LVSC) (IEC 60309-5:2017)
Prises de courant pour usages industriels - Partie 5: Exigences dimensionnelles de
compatibilité et d'interchangeabilité pour les prises de courant et connecteurs de navire
pour les systèmes basse tension de raccordement des navires à quai (IEC 60309-
5:2017)
Ta slovenski standard je istoveten z: EN IEC 60309-5:2019
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
SIST EN IEC 60309-5:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60309-5:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 60309-5:2020


EUROPEAN STANDARD EN IEC 60309-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2019
ICS 29.120.30

English Version
Plugs, socket-outlets and couplers for industrial purposes - Part
5: Dimensional compatibility and interchangeability requirements
for plugs, socket-outlets, ship connectors and ship inlets for low-
voltage shore connection systems (LVSC)
(IEC 60309-5:2017)
Prises de courant pour usages industriels - Partie 5: Stecker, Steckdosen und Kupplungen für industrielle
Exigences dimensionnelles de compatibilité et Anwendungen - Teil 5: Anforderungen und Hauptmaße für
d'interchangeabilité pour les prises de courant et die Austauschbarkeit von Steckern, Steckdosen,
connecteurs de navire pour les systèmes basse tension de Schiffskupplungen und Schiffssteckern für
raccordement des navires à quai Niederspannungs-Landanschlusssysteme (LVSC)
(IEC 60309-5:2017) (IEC 60309-5:2017)
This European Standard was approved by CENELEC on 2019-11-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60309-5:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60309-5:2020
EN IEC 60309-5:2019 (E)
European foreword
The text of document 23H/368/FDIS, future edition 1 of IEC 60309-5, prepared by SC 23H "Plugs,
Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles" of
IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60309-5:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-12-20
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
.
Endorsement notice
The text of the International Standard IEC 60309-5:2017 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 60309-5:2020
EN IEC 60309-5:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Annexes ZA of EN 60309-1:1999, EN 60309-1:1999/A1:2007, EN 60309-1:1999/A2:2012
and Clause 2 of IEC/IEEE 80005-3:— apply with the following additions:
Publication Year Title EN/HD Year
ISO 9227 2012 Corrosion tests in artificial atmospheres - - -
Salt spray tests
ISO 15510 2014 Stainless steels - Chemical composition - -
IEC/IEEE 80005-3 -  Utility connections in port - Part 3: Low - -
Voltage Shore Connection (LVSC)
Systems - General requirements

3

---------------------- Page: 5 ----------------------
SIST EN IEC 60309-5:2020

---------------------- Page: 6 ----------------------
SIST EN IEC 60309-5:2020



IEC 60309-5

®


Edition 1.0 2017-01




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Plugs, socket-outlets and couplers for industrial purposes –

Part 5: Dimensional compatibility and interchangeability requirements for plugs,

socket-outlets, ship connectors and ship inlets for low-voltage shore connection


systems (LVSC)



Prises de courant pour usages industriels –


Partie 5: Exigences dimensionnelles de compatibilité et d'interchangeabilité

pour les prises de courant et connecteurs de navire pour les systèmes basse

tension de raccordement des navires à quai










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.120.30 ISBN 978-2-8322-3844-8



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 60309-5:2020
– 2 – IEC 60309-5:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General . 8
5 Standard ratings . 8
6 Classification . 9
7 Marking . 9
8 Dimensions. 10
9 Protection against electric shock . 10
10 Provision for earthing . 10
11 Terminals and terminations . 10
12 Interlocks . 10
13 Resistance to ageing of rubber and thermoplastic material . 10
14 General construction . 10
15 Construction of socket-outlets . 10
16 Construction of plugs and connectors . 10
17 Construction of appliance inlets . 11
18 Degrees of protection . 11
19 Insulation resistance and dielectric strength . 11
20 Breaking capacity . 11
21 Normal operation . 11
22 Temperature rise . 11
23 Flexible cables and their connection . 11
24 Mechanical strength . 11
25 Screws, current-carrying parts and connections . 11
26 Creepage distances, clearances and distances through sealing compound . 11
27 Resistance to heat, to fire and to tracking . 11
28 Corrosion and resistance to rusting . 11
29 Conditional short-circuit current withstand test . 12
30 Electromagnetic compatibility . 12
STANDARD SHEETS . 13
STANDARD SHEET 5-I SOCKET-OUTLET . 13
STANDARD SHEET 5-II PLUG TOP . 14
STANDARD SHEET 5-III SHIP CONNECTOR TOP . 15
STANDARD SHEET 5-IV SHIP INLET . 16

Figure 501 – Diagram showing the use of accessories . 8

---------------------- Page: 8 ----------------------
SIST EN IEC 60309-5:2020
IEC 60309-5:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PLUGS, SOCKET-OUTLETS AND COUPLERS
FOR INDUSTRIAL PURPOSES –

Part 5: Dimensional compatibility and interchangeability
requirements for plugs, socket-outlets, ship connectors and
ship inlets for low-voltage shore connection systems (LVSC)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60309-5 has been prepared by subcommittee 23H: Plugs, socket-
outlets and couplers for industrial and similar applications, and for electric vehicles, of IEC
technical committee 23: Electrical accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
23H/368/FDIS 23H/371/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 9 ----------------------
SIST EN IEC 60309-5:2020
– 4 – IEC 60309-5:2017 © IEC 2017
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 60309 series, under the general title Plugs, socket-outlets and
couplers for industrial purposes can be found on the IEC website.
This part of IEC 60309 is to be read in conjunction with IEC 60309-1. The clauses of the
particular requirements of this document supplement or modify the corresponding clauses of
IEC 60309-1. Where the text indicates an "addition" to or a "replacement" of the relevant
requirement,
...