SIST EN 140401-804:2011/A1:2014
(Amendment)Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25
Various parameters of this component are precisely specified in this specification. Unspecified parameters may vary from one component to another. The following combinations of temperature coefficient, tolerance on rated resistance shall be used for qualification approval according to 2.2.1 and quality conformance inspection according to 2.3. Resistance values of E-series according to IEC 60063 shall be used. The qualification of resistance values below or beyond the specified resistance values is permitted, if they fulfill the requirements of the closest stability class.
Bauartspezifikation: SMD Schicht-Festwiderstände niedriger Belastbarkeit mit hoher Stabilität - Rechteckig - Stabilitätsklassen 0,1; 0,25
Spécification particulière: Résistances fixes à couche de haute stabilité et à faible dissipation CMS - Rectangulaires - Catégories de stabilité 0,1; 0,25
Podrobna specifikacija: Zelo stabilni fiksni plastni upori majhnih moči za površinsko montažo (SMD) - Pravokotni - Razreda stabilnosti 0,1 in 0,25 - Dopolnilo A1
Različni parametri tega sestavnega dela so natančno opisani v tej specifikaciji. Nedoločeni parametri se lahko razlikujejo med sestavnimi deli. Naslednje kombinacije temperaturnega koeficienta in tolerance nazivne upornosti se uporabljajo za odobritev kvalifikacije v skladu s točko 2.2.1 ter prevzemno kontrolo v skladu s točko 2.3. Uporabljajo se vrednosti upornosti serije E v skladu s standardom IEC 60063. Dovoljena je kvalifikacija vrednosti upornosti pod ali nad določenimi vrednostmi, če izpolnjujejo zahteve najbližjega razreda stabilnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 140401-804:2011/A1:2014
01-januar-2014
3RGUREQDVSHFLILNDFLMD =HORVWDELOQLILNVQLSODVWQLXSRULPDMKQLKPRþL]D
SRYUãLQVNRPRQWDåR 60' 3UDYRNRWQL5D]UHGDVWDELOQRVWLLQ
'RSROQLOR$
Detail Specification: Fixed low power film high stability SMD resistors - Rectangular -
Stability classes 0,1; 0,25
Bauartspezifikation: SMD Schicht-Festwiderstände niedriger Belastbarkeit mit hoher
Stabilität - Rechteckig - Stabilitätsklassen 0,1; 0,25
Spécification particulière: Résistances fixes à couche de haute stabilité et à faible
dissipation CMS - Rectangulaires - Catégories de stabilité 0,1; 0,25
Ta slovenski standard je istoveten z: EN 140401-804:2011/A1:2013
ICS:
31.040.10 Fiksni upor Fixed resistors
SIST EN 140401-804:2011/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 140401-804:2011/A1:2014
---------------------- Page: 2 ----------------------
SIST EN 140401-804:2011/A1:2014
EUROPEAN STANDARD
EN 140401-804/A1
NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM
ICS 31.040.10
English version
Detail Specification: Fixed low power film high stability SMD resistors -
Rectangular -
Stability classes 0,1; 0,25
Spécification particulière: Résistances Bauartspezifikation: SMD Schicht-
fixes à couche de haute stabilité et à Festwiderstände niedriger Belastbarkeit
faible dissipation CMS - mit hoher Stabilität -
Rectangulaires - Rechteckig -
Catégories de stabilité 0,1; 0,25 Stabilitätsklassen 0,1; 0,25
This amendment A1 modifies the European Standard EN 140401-804:2011; it was approved by CENELEC on
2013-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 140401-804:2011/A1:2013 E
---------------------- Page: 3 ----------------------
SIST EN 140401-804:2011/A1:2014
EN 140401-804:2011/A1:2013 2
Contents Page
Foreword . 3
1 Modification to 1.1 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.