SIST-TS CEN ISO/TS 11137-4:2023

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 11137-4:2023
01-september-2023
Sterilizacija izdelkov za zdravstveno oskrbo - Sevanje - 4. del: Navodila za nadzor
procesov (ISO/TS 11137-4:2020)
Sterilization of health care products - Radiation - Part 4: Guidance on process control
(ISO/TS 11137-4:2020)
Sterilisation von Produkten für die Gesundheitsfürsorge - Strahlen - Teil 4: Leitfaden zur
Verfahrenssteuerung (ISO/TS 11137-4:2020)
Stérilisation des produits de santé - Irradiation - Partie 4: Recommandations sur le
contrôle de processus (ISO/TS 11137-4:2020)
Ta slovenski standard je istoveten z: CEN ISO/TS 11137-4:2023
ICS:
11.080.01 Sterilizacija in dezinfekcija na Sterilization and disinfection
splošno in general
SIST-TS CEN ISO/TS 11137-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 11137-4:2023

---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 11137-4:2023


CEN ISO/TS 11137-4
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

June 2023
TECHNISCHE SPEZIFIKATION
ICS 11.080.01
English Version

Sterilization of health care products - Radiation - Part 4:
Guidance on process control (ISO/TS 11137-4:2020)
Stérilisation des produits de santé - Irradiation - Partie Sterilisation von Produkten für die
4: Recommandations sur le contrôle de processus Gesundheitsfürsorge - Strahlen - Teil 4: Leitfaden zur
(ISO/TS 11137-4:2020) Verfahrenssteuerung (ISO/TS 11137-4:2020)
This Technical Specification (CEN/TS) was approved by CEN on 28 May 2023 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 11137-4:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 11137-4:2023
CEN ISO/TS 11137-4:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 11137-4:2023
CEN ISO/TS 11137-4:2023 (E)
European foreword
The text of ISO/TS 11137-4:2020 has been prepared by Technical Committee ISO/TC 198 "Sterilization
of health care products” of the International Organization for Standardization (ISO) and has been taken
over as CEN ISO/TS 11137-4:2023 by Technical Committee CEN/TC 204 “Sterilization of medical
devices” the secretariat of which is held by BSI.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 11137-4:2020 has been approved by CEN as CEN ISO/TS 11137-4:2023 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 11137-4:2023

---------------------- Page
...