SIST EN ISO 4254-12:2012/A1:2017
(Amendment)Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012/Amd 1:2017)
Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012/Amd 1:2017)
Landmaschinen - Sicherheit - Teil 12: Kreiselmähwerke und Schlegelmäher (ISO 4254-12:2012/Amd 1:2017)
Matériel agricole - Sécurité - Partie 12: Faucheuses rotatives à disques, faucheuses rotatives à tambours et faucheuses-broyeuses (ISO 4254-12:2012/Amd 1:2017)
Kmetijski stroji - Varnost - 12. del: Rotacijske kosilnice in mulčerji - Dopolnilo A1 (ISO 4254-12:2012/Amd 1:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4254-12:2012/A1:2017
01-september-2017
.PHWLMVNLVWURML9DUQRVWGHO 5RWDFLMVNHNRVLOQLFHLQPXOþHUML'RSROQLOR$
,62 $PG
Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers
(ISO 4254-12:2012/Amd 1:2017)
Landmaschinen - Sicherheit - Teil 12: Kreiselmähwerke und Schlegelmäher (ISO 4254-
12:2012/Amd 1:2017)
Matériel agricole - Sécurité - Partie 12: Faucheuses rotatives à disques, faucheuses
rotatives à tambours et faucheuses-broyeuses (ISO 4254-12:2012/Amd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 4254-12:2012/A1:2017
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
SIST EN ISO 4254-12:2012/A1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4254-12:2012/A1:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 4254-12:2012/A1:2017
EN ISO 4254-12:2012/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2017
EUROPÄISCHE NORM
ICS 65.060.50
English Version
Agricultural machinery - Safety - Part 12: Rotary disc and
drum mowers and flail mowers (ISO 4254-12:2012/Amd
1:2017)
Matériel agricole - Sécurité - Partie 12: Faucheuses Landmaschinen - Sicherheit - Teil 12:
rotatives à disques, faucheuses rotatives à tambours et Kreiselmähwerke und Schlegelmäher (ISO 4254-
faucheuses-broyeuses (ISO 4254-12:2012/Amd 12:2012/Amd 1:2017)
1:2017)
This amendment A1 modifies the European Standard EN ISO 4254-12:2012; it was approved by CEN on 26 May 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-12:2012/A1:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4254-12:2012/A1:2017
EN ISO 4254-12:2012/A1:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4254-12:2012/A1:2017
EN ISO 4254-12:2012/A1:2017 (E)
European foreword
This document (EN ISO 4254-12:2012/A1:2017) has been prepared by Technical Committee ISO/TC 23
“Tractors and machinery for agriculture and forestry” in collaboration with Technical Committee
CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by
AFNOR.
This Amendment to the European Standard EN ISO 4254-12:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2017,
and conflicting national standards shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, included in EN ISO 4254-12:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Icela
...
SLOVENSKI STANDARD
SIST EN ISO 4254-12:2012/oprA1:2016
01-marec-2016
.PHWLMVNLVWURML9DUQRVWGHO 5RWDFLMVNHNRVLOQLFHLQPXOþHUML'RSROQLOR$
,62 '$0
Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers
(ISO 4254-12:2012/DAM1:2016)
Landmaschinen - Sicherheit - Teil 12: Kreiselmähwerke und Schlegelmäher (ISO 4254-
12:2012/DAM1:2016)
Matériel agricole - Sécurité - Partie 12: Faucheuses rotatives à disques, faucheuses
rotatives à tambours et faucheuses-broyeuses (ISO 4254-12:2012/DAM1:2016)
Ta slovenski standard je istoveten z: EN ISO 4254-12:2012/prA1
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
SIST EN ISO 4254-12:2012/oprA1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4254-12:2012/oprA1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 4254-12:2012/oprA1:2016
DRAFT AMENDMENT
ISO 4254-12:2012/DAM 1
ISO/TC 23/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2016-01-28 2016-04-28
Agricultural machinery — Safety —
Part 12:
Rotary disc and drum mowers and flail mowers
AMENDMENT 1
Matériel agricole — Sécurité —
Partie 12: Faucheuses rotatives à disques, faucheuses rotatives à tambours et faucheuses-broyeuses
AMENDEMENT 1
ICS: 65.060.50
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 4254-12:2012/DAM 1:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015
---------------------- Page: 3 ----------------------
SIST EN ISO 4254-12:2012/oprA1:2016
ISO 4254-12:2012/DAM 1:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written perm
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.