SIST EN 2266-008:2023

SLOVENSKI STANDARD
01-februar-2023
Nadomešča:
SIST EN 2266-008:2015
Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55
°C in 200 °C - 008. del: Družina DRP (dvožilni), DRT (trižilni), DRQ (štirižilni),
večžilni, oplaščeni, z možnostjo UV-laserskega tiskanja - Standard za proizvod
Aerospace series - Cables, electrical, for general purpose - Operating temperatures
between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family,
multicore UV laser printable jacketed cable - Product standard
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung -
Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 008: DRP- (zweiadrig), DRT-
(dreiadrig), DRQ- (vieradrig) Familie, mehradrige, UV-Laser-bedruckbare, ummantelte
Leitungen - Produktnorm
Série aérospatiale - Câbles électriques d'usage général - Températures de
fonctionnement comprises entre -55 °C et 200 °C - Partie 008 : DRP (paire) DRT (tierce)
DRQ (quarte) multiconducteurs gainés marquables au laser UV - Norme de produit
Ta slovenski standard je istoveten z: EN 2266-008:2022
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2266-008
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 2266-008:2015
English Version
Aerospace series - Cables, electrical, for general purpose -
Operating temperatures between -55 °C and 200 °C - Part
008: DRP (pair) DRT (3 cores) DRQ (4 cores) family,
multicore UV laser printable jacketed cable - Product
standard
Série aérospatiale - Câbles électriques d'usage général - Luft- und Raumfahrt - Leitungen, elektrisch, für
Températures de fonctionnement comprises entre -55 allgemeine Verwendung - Betriebstemperaturen
°C et 200 °C - Partie 008 : DRP (paire) DRT (tierce) zwischen - 55 °C und 200 °C - Teil 008: DRP-
DRQ (quarte) multiconducteurs gainés marquables au (zweiadrig), DRT- (dreiadrig), DRQ- (vieradrig)
laser UV - Norme de produit Familie, mehradrige, UV-Laser-bedruckbare,
ummantelte Leitungen - Produktnorm
This European Standard was approved by CEN on 8 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2266-008:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Materials and construction . 6
4.1 Materials . 6
4.2 Construction . 6
4.3 Colours coding of cores . 8
5 Required characteristics . 8
6 Quality assurance . 10
7 Designation . 10
8 Identification and marking . 10
9 Packaging, labelling and delivery lengths . 10
10 Technical specification . 10
Bibliography . 11

European foreword
This document (EN 2266-008:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by May 2023, and conflicting national standards shall be withdrawn at
the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 2266-008:2015.
The main changes with respect to the previous edition are listed in the following table.
Table 1 — Main changes introduced
prEN/EN Publication
Edition Modifications
number date
1 01/2014 -
prEN 2266-
2 05/2021 Modification on some conditions of test (temperature).
Change applicability on humidity test.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document specifies the characteristics of UV laser printable multicore jacketed electrical cables for
use in the on-board electrical systems of aircraft at operating temperatures between −55 °C and 200 °C.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloys conductors for electrical cables — Product standard
EN 2235:2015, Aerospace series — Single and multicore electrical cables, screened and jacketed —
Technical specification
EN 2266-002, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between -55 °C and 20
...