SIST EN 301 489-17 V1.2.1:2003
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
- Abstract
This standard has one common requirements part plus specific parts for each of the radio equipment and services. This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive. This does not include EMC requirements for equipment covered by the Marine Equipment Directive.
- Status
- Published
- Publication Date
- 31-Mar-2003
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Apr-2003
- Due Date
- 01-Apr-2003
- Completion Date
- 01-Apr-2003
SIST EN 301 489-17 V1.2.1:2003 is the Slovenian adoption of ETSI EN 301 489-17 V1.2.1, a candidate harmonized European EMC standard for radio equipment and services. It sets the electromagnetic compatibility test conditions, performance assessment and performance criteria for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment. In practice, manufacturers, test labs and conformity teams use it together with EN 301 489-1 when they need the EMC rules for this radio equipment family.
What does SIST EN 301 489-17 V1.2.1:2003 specify?
SIST EN 301 489-17 V1.2.1:2003 specifies the EMC assessment for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment, including HIPERLAN 1 and 2 and other systems in that family. The standard takes its common technical base from EN 301 489-1 and adds product-specific test conditions for these radio types.
The scope leaves antenna-port specifications and enclosure-port emission specifications to the relevant product standards for radio spectrum use. It also sits outside equipment covered by the Marine Equipment Directive.
The document is organized into clauses 1 to 7, plus two annexes:
| Annex | What it covers |
|---|---|
| Annex A | Informative examples of radio equipment in scope, including 2,4 GHz wideband systems and HIPERLAN type 1 |
| Annex B | Informative bibliography |
What are the key requirements of SIST EN 301 489-17 V1.2.1:2003?
SIST EN 301 489-17 V1.2.1:2003 mainly tells you how to set up the equipment, what to record, and how to judge pass or fail under EMC stress. The most important point is that the equipment under test (EUT) must be exercised in a way that represents normal intended use.
Test conditions and signal arrangements
Clause 4 requires the general test conditions from EN 301 489-1, with added rules for this radio equipment. For transmitter tests, the transmitter is operated at maximum rated power, and the wanted signals or controls needed to establish the link are defined by the manufacturer. For receiver tests, the wanted signal must be at least 30 dB above the declared Maximum Usable Sensitivity (MUS). Practically, this means the lab must test a real operating link, not just power-up behavior.
Host-dependent equipment
Clause 5 gives two ways to assess plug-in radio devices and other host-dependent equipment. The manufacturer chooses either composite equipment testing with a specific host, or a representative test jig or host that simulates the range of intended host systems. This matters because the EMC result may depend on the host electronics, power supply and mechanical integration.
Performance assessment and criteria
Clause 5.3 bases the assessment on maintenance of function, recovery from loss of function and any unintentional behavior. The assessment also checks that communications links stay up and that user control functions and stored user data are not lost. Clause 6 then sets the performance criteria:
- A for continuous phenomena
- B for transient phenomena
- C for power interruptions of the specified type
For transmitters and receivers, the criteria also make sure the transmitter does not start operating unintentionally during the test, except for interpreted ACK or NACK traffic in systems that use acknowledgements.
Applicability
Clause 7 points users back to EN 301 489-1 for the emission and immunity port applicability tables. For this part, no special emission or immunity conditions are added.
What terms does SIST EN 301 489-17 V1.2.1:2003 define?
SIST EN 301 489-17 V1.2.1:2003 uses several equipment terms to separate product types and test setups.
- Equipment Under Test (EUT) - the item being assessed for compliance.
- host - the equipment that provides the functionality, power or control needed by a radio device.
- plug-in radio device - a radio card or similar unit used with a variety of hosts.
- stand-alone radio equipment - equipment intended mainly to work on its own as communications equipment.
- hand-portable station - equipment normally carried and used by a person.
- MUS - Maximum Usable Sensitivity, the declared receiver sensitivity used to set the wanted signal level.
- ACK / NACK / ARQ - acknowledgement, not acknowledgement and automatic retransmission request signals used in link control.
Who uses SIST EN 301 489-17 V1.2.1:2003?
SIST EN 301 489-17 V1.2.1:2003 is used by manufacturers of 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment, including HIPERLAN equipment. EMC test laboratories use it to set up immunity and emission tests, while compliance and quality teams use it to document host configurations, test modulation and minimum performance levels. It is also relevant to certification and conformity work under the EMC Directive and the R&TTE Directive framework named in the document.
What changed in SIST EN 301 489-17 V1.2.1:2003 from the previous edition?
The document history lists an earlier publication, V1.1.1 from September 2000, and the later V1.2.1 publication sequence in 2002. The history in the standard records the version trail, while the foreword identifies this text as part 17 of the multi-part EN 301 489 series.
Which standards are used with SIST EN 301 489-17 V1.2.1:2003?
SIST EN 301 489-17 V1.2.1:2003 is built to be used with ETSI EN 301 489-1, which supplies the common technical requirements, definitions, environmental classification and the general EMC emission and immunity requirements. The references to Directive 1999/5/EC, Council Directive 89/336/EEC and Directive 98/34/EC provide the regulatory basis for the harmonized standard status.
What does the SIST EN 301 489-17 V1.2.1:2003 document contain?
SIST EN 301 489-17 V1.2.1:2003 contains the test conditions for transmitter and receiver set-ups, including companion equipment, wanted signals, normal test modulation and output monitoring. It also contains the host-dependence rules, the assessment procedure, the performance criteria table, and the applicability overview for emission and immunity. Annex A gives examples of in-scope radio equipment, and Annex B lists related ETSI documents such as EN 300 328-1, EN 300 652, EN 301 893 and ETS 300 836-1 for background and cross-reference.
Relations
- Effective Date
- 01-Dec-2009
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 489-17 V1.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment". This standard covers: This standard has one common requirements part plus specific parts for each of the radio equipment and services. This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive. This does not include EMC requirements for equipment covered by the Marine Equipment Directive.
This standard has one common requirements part plus specific parts for each of the radio equipment and services. This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive. This does not include EMC requirements for equipment covered by the Marine Equipment Directive.
SIST EN 301 489-17 V1.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.060.01 - Radiocommunications in general; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 489-17 V1.2.1:2003 has the following relationships with other standards: It is inter standard links to SIST EN 301 489-17 V1.3.2:2008, SIST EN 301 489-17:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 301 489-17 V1.2.1:2003 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC; Standardization Mandates: M/284, T-353. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 301 489-17 V1.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 17. del: Posebni pogoji za 2,4 GHz širokopasovne prenosne sisteme in opremo RLAN z zmogljivostjo 5 GHzElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 489-17 Version 1.2.1SIST EN 301 489-17 V1.2.1:2003en01-april-2003SIST EN 301 489-17 V1.2.1:2003SLOVENSKI
STANDARD
ETSI ETSI EN 301 489-17 V1.2.1 (2002-08) 2
Reference REN/ERM-EMC-230-17 Keywords EMC, HIPERLAN, LAN, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI ETSI EN 301 489-17 V1.2.1 (2002-08) 3
Contents Intellectual Property Rights.4 Foreword.4 1 Scope.5 2 References.5 3 Definitions and abbreviations.6 3.1 Definitions.6 3.2 Abbreviations.6 4 Test conditions.6 4.1 General.6 4.2 Arrangements for test signals.6 4.2.1 Arrangements for test signals at the input of transmitters.7 4.2.2 Arrangements for test signals at the output of transmitters.7 4.2.3 Arrangements for test signals at the input of receivers.7 4.2.4 Arrangements for test signals at the output of receivers.7 4.2.5 Arrangements for testing transmitter and receiver together (as a system).7 4.3 Exclusion bands.7 4.4 Narrow band responses on receivers or receivers which are part of transceivers.7 4.5 Normal test modulation.8 5 Performance assessment.8 5.1 General.8 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.8 5.2.1 Alternative A: composite equipment.8 5.2.2 Alternative B: use of a test jig or host.9 5.3 Assessment procedures.9 5.4 Ancillary equipment.9 5.5 Equipment classification.9 6 Performance criteria.9 6.1 General performance criteria.9 6.2 Performance table.10 6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT).10 6.4 Performance criteria for Transient phenomena applied to Transmitters (TT).10 6.5 Performance criteria for Continuous phenomena applied to Receivers (CR).11 6.6 Performance criteria for Transient phenomena applied to Receivers (TR).11 7 Applicability overview.11 7.1 Emission.11 7.1.1 General.11 7.1.2 Special conditions.11 7.2 Immunity.11 7.2.1 General.11 7.2.2 Special conditions.11 Annex A (informative): Examples of radio equipment in the scope of the present document.12 A.1 Wideband transmission systems operating in the 2,4 GHz ISM band using spread spectrum techniques.12 A.2 HIgh PErformance Radio Local Area Networks (HIPERLAN) type 1 operating in the 5 GHz frequency band.12 Annex B (informative): Bibliography.13 History.14
ETSI ETSI EN 301 489-17 V1.2.1 (2002-08) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [4] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [2]). The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 9 August 2002 Date of latest announcement of this EN (doa): 30 November 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 May 2003 Date of withdrawal of any conflicting National Standard (dow): 31 May 2004
ETSI ETSI EN 301 489-17 V1.2.1 (2002-08) 5
1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of the 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN (including HIPERLAN 1 and 2 and other) equipment, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for wideband data communication systems. Examples of types of wide band data communications systems covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. [1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements". [2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [3] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive). [4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. SIST EN 301 489-17 V1.2.1:2003
ETSI ETSI EN 301 489-17 V1.2.1 (2002-08) 6
3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the following apply: Equipment Under Test (EUT): equipment under test and subject to the performance requirements of EN 301 489-17 fixed station: equipment intended for use in a fixed location and fitted with one or more antennas NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both. hand-portable station: equipment normally used on a stand-alone basis and to be carried by a person NOTE: The equipment may be fitted with one or more antennas. The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both. host: any equipment which has complete user functionality when not connected to the radio e
...