iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 3386-1:1979

(Main)

Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials

Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials

Matériaux alvéolaires souples — Détermination de la caractéristique de contrainte-déformation relative en compression et de la valeur de la contrainte en compression — Partie 1: Matériaux à basse masse volumique

General Information

Status
Withdrawn
Publication Date
31-May-1979
Withdrawal Date
31-May-1979
ICS
83.100 - Cellular materials
Technical Committee
ISO/TC 45 - Rubber and rubber products
Drafting Committee
ISO/TC 45 - Rubber and rubber products
Current Stage
9599 - Withdrawal of International Standard
Start Date
01-Jun-1986
Completion Date
13-Dec-2025
Ref Project

Relations

Revised
SIST ISO 3386-1:1996 - Polymeric materials, cellular flexible -- Determination of stress-strain characteristics in compression -- Part 1: Low-density materials
Effective Date
12-May-2008
Revised
ISO 3386-1:1986 - Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials
Effective Date
15-Apr-2008
ISO 3386-1:1979 - Flexible cellular materials -- Determination of compression stress/strain characteristic and compression stress valueISO 3386-1:1979 - Flexible cellular materials -- Determination of compression stress/strain characteristic and compression stress value
PreviousNext
Standard
ISO 3386-1:1979 - Flexible cellular materials -- Determination of compression stress/strain characteristic and compression stress value
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3386-1:1979 - Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials Released:6/1/1979ISO 3386-1:1979 - Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials Released:6/1/1979
PreviousNext
Standard
ISO 3386-1:1979 - Flexible cellular materials — Determination of compression stress/strain characteristic and compression stress value — Part 1: Low density materials Released:6/1/1979
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 3386-1:1979 is a standard published by the International Organization for Standardization (ISO). Its full title is "Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials". This standard covers: Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials

Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials

ISO 3386-1:1979 is classified under the following ICS (International Classification for Standards) categories: 83.100 - Cellular materials. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 3386-1:1979 has the following relationships with other standards: It is inter standard links to SIST ISO 3386-1:1996, ISO 3386-1:1986. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 3386-1:1979 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


International Standard 33861 1
INTERNATIONAL ORGANIZATION FOR STANDAROlZATION.MEmLIYHAPOLIHAR OPrAHH3AUHR Il0 CTAHLIAPTH3AUHHWRGANlSATlON INTERNATIONALE DE F4ORMALISATION
Flexible cellular materials - Determination of
(. compression stress/strain characteristic and compression
I
stress value -
Part 1 : Low density materials
Matériaux alvéolaires souples - Détermination de la caractéristique de contrainte-déformation relative en compression et de la
valeur de la contrainte en compression - Partie 1 : Matériaux à basse masse volumique
First edition - 1979-06-01
I
!e
UDC 67û-49ô: 678.01 : 539.411 Ref. No. IS0 33W1-1979 (E)
R
z
Descriptors : flexible cellular materials, tests, compression tests, test specimens.
!4 Price based on 2 pages ~
INTERNATIONAL STANDARD IS0 3386/1-1979 (E)
Flexible cellular materials - Determination of
compression stressktrain characteristic and compression
stress value -
Part 1 : Low density materials
1 SCOPE AND FIELD OF APPLICATION
3.2 compression stress value (CV,,) : The compression
stredstrain characteristic for a compression of 40 %.
This International Standard specifies a method for the
determination of the compression stresdstrain characteristic
and compression stress value of low density flexible cellular
4 APPARATUS
materials up to 250 kg/m3.
4.1 Test machine
NOTE - It is intended to develop a method for high density flexible
cellular materials as a part 2 of this International Standard.
The test machine shall be capable of compressing the test
piece between a support surface (see 4.2) and a
The compression stress/strain characteristic is a measure of
compression plate (see 4.3), which shall have a uniform
the load-bearing properties of the material, though not
relative rate of motion in the vertical direction of
necessarily of its capacity to sustain a long-term load.
100 f 20 mm/min.
The compression stresdstrai
...


Norme internationale 33861 1
INTERNATIONAL ORGANIZATION FOR STANDAROIZATlON~ME~YHAPO&IHAR OPTAHHJAUHR Il0 CTAHIIAPTH3AUHHWRGANlSATlON INTERNATIONALE DE NORMALISATION
Matériaux Matériaux alvéolaires alvéolaires souples souples - - Détermination Détermination de de la la
caractéristique caractéristique de de contrainte-déformation contrainte-déformation relative relative en en
compression compression et et de de la la valeur valeur de de la la contrainte contrainte en en
compression compression - -
Partie Partie 1 1 : : Matériaux Matériaux à à basse basse masse masse volumique volumique
Flexible Flexible cellular cellular materials materials - - Determination Determination of of compression compression stress/strain stress/strain characteristic characteristic and and compression compression stress stress value value - -
Part Part 1 1 : : Low Low density density materials materials
Première Première édition édition - - 1979-06-01 1979-06-01
LL
CDU 678-496 : 678.01 : 539.411 Réf. Réf. no no : : IS0 IS0 =/I-1979 =/I-1979 (FI (FI
CDU 678-496 : 678.01 : 539.411
Descripteurs : produit alvéolaire souple, essai, essai de compression, spécimen d’essai.
Descripteurs : produit alvéolaire souple, essai, essai de compression, spécimen d’essai.
Prix Prix basé basé sur sur 2 2 pages pages

NORME INTERNATIONALE IS0 3386/1-1979 (F)
Matériaux alvéolaires souples - Détermination de la
caractéristique de contrainte-déformation relative en
compression et de la valeur de la contrainte en
compression -
Partie 1 : Matériaux à basse masse volumique
1 OBJET ET DOMAINE D'APPLICATION 4 APPAREILLAGE
La présente Norme internationale spécifie une méthode de
4.1 Machine d'essai
la Caractéristique de contrainte-déforma-
détermination de
tion relative en compression et de la valeur de la contrainte
La machine d'essai doit être capLwle de comprimer I'éprou-
en compression des matériaux alvéolaires souples à basse
vette entre une surface support (voir 4.2) et une plaque de
masse volumique jusqu'à 250 kg/m3.
compressbn (voir 4.3). qui doit avoir une vitesse de dépla-
cement uniforme dans le plan vertical de 100 f 20 mm/min.
NOTE - II est prévu d'établir une méthode pour les matériaux
alvéolaires souples à haute masse volumique, en tant que partie 2
de la présente Norme internationale. La machine d'essai doit être capable de mesurer la force
nécessaire pour produire la compression spécifiée, avec
La caractéristique de contrainte-déformation relative en
une précision de f 2 %, et de mesurer l'épaisseur de I'éprou-
compression
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 4898:2025(Main)
Rigid cellular plastics - Thermal insulation products for buildings - Specifications

This document specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard, or other materials. This document is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation. This document covers the following cellular materials used in the thermal insulation of buildings: - PF based on phenolic polymer; - EPS based on expanded polystyrene; - XPS based on extruded polystyrene; - PUR based on polyurethane. The limiting quality values in this document are for use only in the specification of materials between purchaser and supplier.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 3386-1:2025(Main)
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials

This document specifies a method for the determination of the compression stress/strain characteristics of low-density flexible cellular materials up to 250 kg/m3. It also specifies a method for the calculation of the compression stress value of such materials.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 2440:2025(Main)
Flexible and rigid cellular polymeric materials - Accelerated ageing tests

This document specifies laboratory procedures which are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity for flexible and rigid cellular polymeric materials.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
ISO
ISO 6916-2:2024(Main)
Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Part 2: Specification for mouldings and extrusions

This document classifies flexible cellular rubber products known as sponge and expanded rubber. The base material used in their manufacture may be natural rubber, reclaimed rubber, synthetic rubber or rubber-like material, either alone or in combination. Thermoplastic rubbers are not included. This document does not apply to latex foam rubbers or shoe soling. This document covers vulcanized cellular rubber products that are manufactured by a moulding or continuous vulcanization process, i.e. hot air, microwave, infra-red, liquid curing medium (LCM), shearing-head vulcanization or a combination of two or more of these methods. Sheeting materials are covered by ISO 6916-1. In the case of conflict between the provisions of this document and those of the detailed specification or test method for a particular product, the latter takes precedence. Reference to the methods specifically states the desired test or tests.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 7231:2023(Main)
Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop

This document specifies two methods for determining the air flow value of flexible cellular polymeric materials: - method A, for conventional types of flexible cellular polymeric material; - method B, for all types of flexible cellular polymeric material, but especially for materials with a low permeability to air. For method B, two methods are specified in this document: - method B1: with manual measurement; - method B2: with automatic measurement. NOTE 1 Air flow values can be used to give an indication of the effects of formulation and production variables on the cellular structure. NOTE 2 In this document, the expression “conventional type of flexible cellular polymeric material” means types which are unsuitable for sealing purposes.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 1663:2023(Main)
Rigid cellular plastics - Determination of water vapour transmission properties

This document specifies a method of determining the water vapour transmission rate, water vapour permeance, water vapour permeability and water vapour diffusion resistance index for rigid cellular plastics. This method is applicable for the testing of rigid cellular materials that have thicknesses from 10 mm upwards and can, as an integral part of the material, contain natural skins or adhered facings of some different material. Three different sets of temperature and humidity conditions are provided, as follows: a) 38 °C and a relative-humidity gradient across the test specimen of 0 % to 88 % b) 23 °C and a relative-humidity gradient across the test specimen of 0 % to 85 % c) 23 °C and a relative-humidity gradient across the test specimen of 0 % to of 50 % The results obtained by this method are suitable for design purposes and production control, and for inclusion in product specifications. The method is suitable for materials which have water vapour transmission rates in the range 3 µg/(m2⋅s) to 1 400 µg/(m2⋅s).

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 23641:2021(Main)
Flexible cellular polymeric materials - Determination of antibacterial effectiveness

This document specifies a method of determining the antibacterial effectiveness of open-cell flexible cellular polymeric antibacterial treated materials, including their intermediate and final products. This document is suitable for flexible cellular polymeric materials because the test procedure enables the test inoculum to efficiently contact with the surface of open cell in the flexible cellular polymeric materials.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 844:2021(Main)
Rigid cellular plastics - Determination of compression properties

This document specifies methods for determining the compressive strength and corresponding relative deformation, the compressive stress at 10 % relative deformation, and the compressive modulus of rigid cellular plastics.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 9772:2020(Main)
Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
SIST ISO 9772:2022

This document specifies a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens having a density less than 250 kg⋅m−3 determined in accordance with ISO 845, when exposed to a small-flame ignition source. NOTE Another International Standard which covers flexible cellular plastic and cellular rubber is ISO 3582[2]. This method of test is intended for quality assurance and limited product evaluation of cellular plastic materials under controlled laboratory conditions, and is not intended to assess the fire behaviour of, for example, building materials or furnishings under actual fire conditions. The optional classification system described in Annex A is intended for the pre-selection of cellular plastic materials for products, including the determination of the ranges of material parameters that give the same classification (see 6.1).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 2440:2019(Main)
Flexible and rigid cellular polymeric materials - Accelerated ageing tests

This document specifies, for flexible and rigid cellular polymeric materials, laboratory procedures which are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity. The physical properties of interest are measured before and after the application of the specified treatments. Test conditions are only given for open cellular latex, both open- and closed-cell polyurethane foams, and closed-cell polyolefin foams. Conditions for other materials will be added as required. The effect of the ageing procedures on any of the physical properties of the material can be examined, but those normally tested are either the elongation and tensile properties, or the compression or indentation hardness properties. These tests do not necessarily correlate either with service behaviour or with ageing by exposure to light. If desired, the ageing conditions contained in this document can be applied to composite structures containing any of the above types of cellular material. This can be helpful in the investigation of possible interactions between cellular materials and other substrates. Composite constructions can be in the form of complete finished products or representative small specimens cut there-from.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off