ISO 6915:2019
(Main)Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
This document specifies the minimum requirements for flexible polyurethane foams up to and including 20 mm thick intended for combination with suitable substrates such as non-woven, woven or knitted fabrics, to form a laminate. Three types of flexible polyurethane foam are specified as follows: — type 1: polyether; — type 2: polyester with minimum elongation at break of 200 %; — type 3: polyester with minimum elongation at break of 300 %.
Matériaux polymères alvéolaires souples — Mousse de polyuréthanne pour utilisation sous forme de feuilles pour assemblages — Spécifications
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 6915
Third edition
2019-08
Corrected version
2020-04
Flexible cellular polymeric
materials — Polyurethane foam for
laminate use — Specification
Matériaux polymères alvéolaires souples — Mousse de polyuréthanne
pour utilisation sous forme de feuilles pour assemblages —
Spécifications
Reference number
ISO 6915:2019(E)
©
ISO 2019
---------------------- Page: 1 ----------------------
ISO 6915:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 6915:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Appearance . 1
5 Joints . 2
6 Odour . 2
7 Dimensions . 2
7.1 Thickness . 2
7.2 Width . 2
7.3 Length . 2
8 Apparent density . 3
9 Cell count . 3
10 Performance requirements . 3
11 Packaging and marking . 3
Annex A (normative) Measurement of cell count . 5
Annex B (normative) Measurement of solvent swelling . 7
© ISO 2019 – All rights reserved iii
---------------------- Page: 3 ---------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.