ISO 23464:2020
(Main)Nitrile cleanroom gloves — Specification
Nitrile cleanroom gloves — Specification
This document specifies the specification for ISO Class 4, ISO Class 5 and ISO Class 6 nitrile cleanroom gloves. It is applicable to cleanroom gloves made of acrylonitrile butadiene material.
Gants en nitrile pour salles blanches — Spécifications
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 23464
First edition
2020-07
Nitrile cleanroom gloves —
Specification
Reference number
ISO 23464:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO 23464:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 23464:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
6 Sampling . 3
7 Test methods . 3
7.1 Particle count . 3
7.2 Ionic content . 4
7.3 Total non-volatile residue . 4
7.4 Silicone, amide and DOP content . 4
8 Processing, packaging and marking . 4
Bibliography . 5
© ISO 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 23464:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical s
...
INTERNATIONAL ISO
STANDARD 23464
First edition
Nitrile cleanroom gloves —
Specification
PROOF/ÉPREUVE
Reference number
ISO 23464:2020(E)
©
ISO 2020
---------------------- Page: 1 ----------------------
ISO 23464:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 23464:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
6 Sampling . 3
7 Test methods . 3
7.1 Particle count . 3
7.2 Ionic content . 4
7.3 Total non-volatile residue . 4
7.4 Silicone, amide and DOP content . 4
8 Processing, packaging and marking . 4
Bibliography . 5
© ISO 2020 – All rights reserved PROOF/ÉPREUVE iii
---------------------- Page: 3 ----------------------
ISO 23464:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.