ISO/TS 19158:2012
(Main)Geographic information — Quality assurance of data supply
Geographic information — Quality assurance of data supply
ISO/TS 19158:2012 provides a framework for quality assurance specific to geographic information. It is based upon the quality principles and quality evaluation procedures of geographic information identified in ISO 19157 and the general quality management principles defined in ISO 9000. The framework defined in ISO/TS 19158:2012 enables a customer to satisfy itself that its suppliers, both internal and external, are capable of delivering geographic information to the required quality. Fundamental to the framework is the assurance of the supplier's ability to understand and meet the quality requirements. Through the quality assurance framework both the customer and the supplier are able to consider the quality required at the earliest opportunity in the production/update process. Principles and responsibilities of the relationship between the customer and the supplier that facilitate the framework are provided. The responsibility for the quality assessment procedure is shared between the customer and the supplier. ISO/TS 19158:2012 is applicable to customers and suppliers of all geographic information where the quality of the product may be impacted upon by the supplier's processes in any of the following scenarios: 1) there is an agreement or legislation for the supply of data acquisition services, 2) data acquisition services are being tendered for, and 3) one or more suppliers exist in the supply chain. ISO/TS 19158:2012 is not applicable for the supply of legacy datasets or ?off the shelf' products where there is no further data production or update activity to manage.
Information géographique — Assurance qualité relative à l'approvisionnement de données
General Information
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 19158
First edition
2012-10-15
Geographic information — Quality
assurance of data supply
Information géographique — Assurance qualité relative à
l’approvisionnement de données
Reference number
ISO/TS 19158:2012(E)
©
ISO 2012
---------------------- Page: 1 ----------------------
ISO/TS 19158:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 19158:2012(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Conformance . 1
3 Normative references . 1
4 Terms and definitions . 1
5 Abbreviated terms . 3
6 General principles . 3
6.1 Quality assurance in production and update . 3
6.2 Data quality evaluation . 4
6.3 Quality assurance framework . 5
7 Requirements . 6
7.1 Production and/or update quality assurance . 6
7.2 Quality assurance levels . 6
8 Quality assessment procedures . 7
8.1 Basic quality assessment . 7
8.2 Operational quality assessment . 7
8.3 Full quality assessment . 8
8.4 Quality assurance maintenance and monitors . 8
8.5 Failure to achieve required quality assurance level . 9
Annex A (normative) Abstrac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.